Printable View
Thanx, fellas. All your suggestions helped....I found some wire seals @ work & the methods mentioned worked excellent. I bought some 3M double sided tape but lookin' @ it I think it's gonna be tedious to cut to conform to all the small points & gaps on the emblems. I ordered a bowtie online that came with the tape precut on it. I want to see the paint job thru the emblems so I'm thinkin' there must be a spray on adhesive I can buy to do the trick. Any suggestions ya'll?
Superglue? Lol but really I'm not sure but I have done super glue on a emblem and it held good if you have a wurth distributor their glue and plastic weld activator works like a champ
You dont have to get 3m on every nook anf cranny. Just cover the majority of it. Anything less than the 3m will fall off later. Also a xacto knife or thin razor blade wll be your friend here.Quote:
Originally Posted by Ardent_Z28
Something I've always used with great success, is an old McDonalds Gift Card. I've had the card and used it for about a year now. I carry it in my wallet and when I'm in the junkyard and find an emblem I simply slide it behind the emblem and it comes right off. Never had any issues or scratched paint with it. Works like a charm :thumbsup:.
Ill have to try the fishing line method.
I carefully use a sharp 2" putty knife and cut the emblem off leaving the tape on the body. Then use an eraser tool to remove the rest