Whats the best stall for my LT1?

[LT1RUNNER]

Hey guys! What would be the best stall speed for my modded LT1? It's going to be for the street and I wan't something that will get me off the line better. I'm putting down about 300-350 hp (i think) range but I'm not sure where cause I haven't dynoed the car. I'm going to install some 3.73 gears with the along with a shift kit. Any help appreciated.

[mrbadlt1]

3000 or 3200 would be good, i have a 3200 vigilante in my heads and cam car

[jakesz28]

Has much been done to your car? The stall will depend on cam and power adder if you want to add nitrous. But I think a good 3600-4000 stall is drivable with the 4L60E. With a lock up converter you won't have any problems cruising down the highway.

[96lt1m6]

3200
3600
either of them will be very good for any Lt1. most Lt1s that have just bolt ons work very well with a 3600 and if you decide to add cam and heads you already have enough converter........3600 overall is the best in my experience

[Blkdragon]

Don't go too small or you'll regret it. I have a 3000 stall and wish I would have went bigger. . I'd recommend around 3600-3800.

[joelster]

Don't go too small or you'll regret it. I have a 3000 stall and wish I would have went bigger. . I'd recommend around 3600-3800.


x2

[Phstratton]

3000 or 3200 would be good, i have a 3200 vigilante in my heads and cam car

how big is the cam in your car? Is yours a Daily Driver?

[R3DLT1]

I run a 3000 stall and i love it. no regreats here