what years of vette rims fit my 95?

[chief455]

only ZR-1 , Z06?

17" - what year vettes have our back space?

[Stroked96Bowtie]

We'll get some other opinions but I had a set of z06s on my car some time ago. While I was selling them I learned he BS on those that were made to fit a camaro/fbird were diff than what actaully came on the vettes.

Knew someone that had a set of actual c6 wheels off of a vette...the wheels stuck out of the fenderwell...not good:doh:

[Z28pr0jekt]

C5 rims will fit thin spoke or wagon wheels

[chief455]

C5 = what years?
I'm not a vette guy ;)

[Z28pr0jekt]

1997-2004

[GVMV]

So 93-96 Have 55mm backspacing so will 56 mm backspacing rims work?

I found this link talking about spacers for 3rd Gen's but has listing of backspacing and years.
http://www.skulte.com/adapterfaq.html


Corvette 84-87 16x9.5 38mm 6.6"
Corvette 88-96 17x9.5 56mm 7.3"
Corvette GS ZR1 style 17x9.5 50mm 7"
Corvette ZR1 style (Low Offset) 17x9.5 38mm 6.7"
Corvette ZR1 style (Low Offset) 17x11 36.5mm 7.397"
Rear Corvette ZR1 style (High Offset) 17x9.5 56mm 7.4"
Corvette ZR1 style (High Offset) 17x11 50mm 7.93"
Rear C5 Corvette 97-2000 17x8.5 front 56mm 6.8"
C5 Corvette 97-2000 18x9.5 rear 63mm 7.6"
C5 Corvette Z06 17x9.5 front 54mm 7.2"
C5 Corvette Z06 18x10.5 rear 58mm 7.9"
Rear C6 Corvette 18x8.5 front (new 88967389, old GM 9594351) 56-58mm depending on where you see it 6.53"
Front & Rear C6 Corvette 19x10 rear (new 88967390, old GM 9594353) 79mm 8.11"
Rear C6 Corvette Z06 18x10
front C6 Corvette 19x12 rear
Camaro 82-92 16x8 front 0mm 4.35" Camaro 89-92 16x8 rear 16mm 5"
Camaro F1 ZR1-style 17x9 50mm 6.8" 2"
Camaro 93-97 16x8 55mm 6.5" 2"
ROH ZS 17x9.5 5 mm 5.472" ROH ZS 17x8.5 -7 mm 4.5"



I am needing a couple of rims for next year to have some DR's on and these came up on craiglist.

http://images.craigslist.org/1151g5142ZZZZZZZZZ8acf0b63bf349b91809.jpg

In theory these should fit fine, correct?

For original poster I know I kind of hijacked your thread but no one answered your question directly and hoped the information I found would help you also.

[chief455]

For original poster I know I kind of hijacked your thread but no one answered your question directly and hoped the information I found would help you also.
info helped and the skulte manufacturer is 30 minutes from my house!
they make dam nice wheel spacers.
I went with a totally different wheel than anyone else - too many Z-R1 and Z-06 f-bodies out there and TT 2 and Draglite/Prostar on drag cars.
It's like Cragar SS was in the '70s lol!

[integraXTC]

so what did you go w/? ^^^^

[chief455]

so what did you go w/? ^^^^
well, I'll post up pics but right now I have a fitment issue.

[IronOutlaw]

Ive got the thing spoke c5 wheels and had to take a hammer to the inside fenderwells. They fit fine now. ;)

[Fixxer99TA]

I got lucky and got the C5s from a 2002 SS, already fit no problems with no hammer mod :D

(Same width all around, unlike the corvette version).

[YZF]

My 17x11's fit fine after cutting half of my bump stops off :)