LT1 Boost Twin Turbo build up

[RealQuick]

Finished pics of the TT setup:

http://lt1boost.net/yahoo_site_admin/assets/images/DSC00661.299144123_std.JPG
http://lt1boost.net/yahoo_site_admin/assets/images/DSC00659.299144246_std.JPG
http://lt1boost.net/yahoo_site_admin/assets/images/DSC00660.299144318_std.JPG
http://lt1boost.net/yahoo_site_admin/assets/images/DSC00662.299144441_std.JPG
http://lt1boost.net/yahoo_site_admin/assets/images/DSC00663.299144514_std.JPG

Some progress pics of the Twin turbo setup I am making. This kit will support T4 T60 thru T76's and will support anywhere from 700rwhp to 1100rwhp depending on which turbos you use.

The goal is to retain the radiator in the stock location, thats why i mounted them low. You will need to run an oil scavenger pump(s) to push the oil to the pan (or up to the valvecover like the STS kits do). This kit deletes A/C and the AIR pump, but other than that everything else remains. I still need to do some grinding and clean up work, but here is the layout of the pass side.

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00522.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00533.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00534.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00529.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00535.jpg

[YZF]

DROOL!

[Z28pr0jekt]

looks great, your welds definitely improved alot

[santa_rosa_lt1]

looks great, your welds definitely improved alot
:stupid:

[NicksTAgt]

Wow, looking good man!

[RealQuick]

Thanks guys.:metal:

[Fixxer99TA]

Damn dude, I am going to have to come by and checkout that setup/the shop :D

You arent too far, Middleboro you said? I am often in Franklin/Norwood, so pretty close...

[RealQuick]

Damn dude, I am going to have to come by and checkout that setup/the shop :D

You arent too far, Middleboro you said? I am often in Franklin/Norwood, so pretty close...

Definitely. Just shoot me an email and let me know when.

[tbird31]

that's beautiful.

i just wanna know how you're gonna run the dipstick tube. haha.

[RealQuick]

that's beautiful.

i just wanna know how you're gonna run the dipstick tube. haha.

thanks dude. You can just bend the tube :cool:

[AChotrod]

Wicked Looking set up!

[bricez28]

wish i had a turbo :(

[RealQuick]

Some updated pics... I am stuck where I am until i receive some more turbo flanges.

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00548.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00547.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00556.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00553.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00554.jpg

[birdflu]

now that is cool ,looks good

[TCGiRL220]

looks nice... I'm feeling a tad bit of jealousy =]~

[RealQuick]

Thanks guys. I finally got some more raw materials in, so I can go back to finishing this kit up. Check out the thread on the budget kit. I will be posting final pics today.

[RealQuick]

Some updated pics:

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00593.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00594.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00592.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00595.jpg

[Fixxer99TA]

Looks great man, keep posting up the great pics... You might be swaying me to go turbo :D

[RealQuick]

I ran out of 3" pipe, so i cant finish the DP till it comes in thursday. I can mount the wastegate, but then I am done with this kit till thursday. If nobody wants to man up and buy this kit, i might install it on my vehicle.

[Z28pr0jekt]

i'm assuming youre just going to run a "screen" over the inlets?

[RealQuick]

i'm assuming youre just going to run a "screen" over the inlets?

Correct. this is a race setup (track use with limited street use).

[Fastbird]

Just curious, but is there the possibility of air starvation for one or either of the turbo's mounted like that. Air is a fluid after all, and will only flow so much through a given area. Packed in an engine bay like that, I'd be curious of there being enough air flow to accommodate both of those turbo's huffing air at full spool through there.

[Z28pr0jekt]

Just curious, but is there the possibility of air starvation for one or either of the turbo's mounted like that. Air is a fluid after all, and will only flow so much through a given area. Packed in an engine bay like that, I'd be curious of there being enough air flow to accommodate both of those turbo's huffing air at full spool through there.

I was thinking the same thing, that they would possibly be fighting over the air

[RealQuick]

no, I dont think there is any chance of that.

[Fastbird]

no, I dont think there is any chance of that.

You're the turbo guy!! As long as you think it'll work there should be no problems.

[RealQuick]

You're the turbo guy!! As long as you think it'll work there should be no problems.

Airflow is like electricity... path of least resistance. Isntead of fighting eachother for air (each inlet of the turbo), they will just pull air from the surrounding area (lots of air under the car).

Jon

[enjoi355]

just curious but how much is this setup??

[enjoi355]

just curious but how much is this setup??

o i went to the website, wish i could rob a bank or something!!

[Fastbird]

Airflow is like electricity... path of least resistance. Isntead of fighting eachother for air (each inlet of the turbo), they will just pull air from the surrounding area (lots of air under the car).

Jon

That's where my concern was though. There's not a lot of extra airflow where those are.

[RealQuick]

That's where my concern was though. There's not a lot of extra airflow where those are.

The underneath of the car is open to air... no restrictions. You dont need air to flow into the turbo... the turbo will pull in surrounding air thats near the inlet. i dont think it will be an issue.

[RealQuick]

Mounted the last wastegate. Waiting on more piping to arrive before i can finish it.

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00618.jpg

http://i45.photobucket.com/albums/f94/RealQuick/TT/DSC00620.jpg

[96SilverRam]

I want some more progress :D:devil:

[RealQuick]

I want some more progress :D:devil:

You my friend will get some! :devil: I received the 3" pipe yesterday I have been waiting 3 weeks for... gonna finish the last part of the driver's side DP... so hotparts completed by tonight.

[Fastbird]

How low do those pipes go????

[97ForMuLa]

looks like it would be fun. can you tell me why a part of the runner on the exhaust manifolds are smaller diameter than the rest?

[RealQuick]

How low do those pipes go????

Even with the bottom of the K-member. Doesn't look that way from the angle of the shots though.

[RealQuick]

looks like it would be fun. can you tell me why a part of the runner on the exhaust manifolds are smaller diameter than the rest?

I am not sure what you mean? Do you mean the primary on the last cylinders on each manifold is smaller than the body of the manifold? If thats what you mean, then here is the how the layout is:

All primary tubes (all 8 total p[rimaries) are 1.75" and main exhaust manifolds body is 2.5".

[RealQuick]

BTW, new pics of the driver's side finished DP will come at lunch.

[RealQuick]

Still need to do some final cleanup:

http://lt1boost.net/yahoo_site_admin/assets/images/DSC00644.29694001_std.JPG

http://lt1boost.net/yahoo_site_admin/assets/images/DSC00645.29694033_std.JPG

http://lt1boost.net/yahoo_site_admin/assets/images/DSC00646.29694107_std.JPG

http://lt1boost.net/yahoo_site_admin/assets/images/DSC00647.29694140_std.JPG

[RealQuick]

uPDATED FIRST POST WITH FINSHED PICS OF HOTPARTS

[kinglt1]

Very nice sir!

[RealQuick]

Thanks!:cool:

[96SilverRam]

So, who is the lucky owner of this twin-turbo LTx kit ? I really like saying " Twin Turbo LTx " :D

[RealQuick]

Nobody. I can cut ya a serious deal if you are interested. Email me if you are: jon@lt1boost.net

BTW, check out my thread on my new sale prices!!