PDA

View Full Version : I see Moe Bailey is in the house!


Tony Shepherd
10-01-2009, 01:00 PM
Welcome Moe! Guys this is a great tuner that I see now joined this site. He is the main tuner for my car.:finger: If you have any questions with LT1, LS1, or FAST XFI tuning he is a good source to ask. He has taught me a ton and still is!
His screen name is: MoeHorsePower

Tony
AChotrod
10-01-2009, 01:04 PM
Welcome moe!! Glad you made it over!!!!
Formula383
10-01-2009, 01:13 PM
Welcome Moe! Guys this is a great tuner that I see now joined this site. He is the main tuner for my car.:finger: If you have any questions with LT1, LS1, or FAST XFI tuning he is a good source to ask. He has taught me a ton and still is!
His screen name is: MoeHorsePower

Tony

X2

What's up Moe! I'm gonna need a re-tune in about 2 months, LOL!
Fastbird
10-01-2009, 06:32 PM
Welcome Moe!!! I may have to query you when it comes time to start my XFI controlled motor.
MoeHorsePower
10-06-2009, 07:21 AM
Thanks all, glad to be in, Will help any of you out as much as I can.....
grn95t/a
10-07-2009, 05:07 PM
welcome, great to have you here!
Fire67
10-09-2009, 04:11 PM
Welcome!
Speed Density
10-09-2009, 04:34 PM
Welcome aboard, Moe!

This guy knows his stuff, flew him up here to tune a couple of cars, needless to say they made power!
95LT1Z28
10-12-2009, 05:17 PM
Welcome Moe! Going to be building a 383 with a 150 shot and im sure ill be bugging the hell outta you with questions haha.
Wooshie
10-12-2009, 06:48 PM
Welome to the site Moe.
Flyinz
10-18-2009, 09:10 PM
Not coming to IL, anytime within the next 6 months, are ya Moe? :)

Glad to see you made it.
MoeHorsePower
10-21-2009, 07:17 AM
Never know, Waiting on Tony N, then might can do a few cars...
1toofastlt1
10-21-2009, 10:31 AM
welcome moe
Chopstix
10-21-2009, 04:46 PM
Another MoeHorsePower customer here, nice to have you aboard.
MoeHorsePower
10-22-2009, 06:51 AM
Thanks all. Let me know if you need any help on anything....
Ryan Stout
10-22-2009, 07:34 AM
Where are you located at Moe? I see a lot of people like your work and I'm building a H/C 383+turbo car I'd like to run 14psi on with meth and speed density....
Tony Shepherd
10-22-2009, 07:58 AM
Where are you located at Moe? I see a lot of people like your work and I'm building a H/C 383+turbo car I'd like to run 14psi on with meth and speed density....

Moe is in San Antonio Tx but you can fly him to you like many do.
Phstratton
10-22-2009, 10:02 AM
Where are you located?
Tony Shepherd
10-22-2009, 10:57 AM
Where are you located?

Me? Georgetown Tx. (just outside of Austin)
MoeHorsePower
10-22-2009, 12:17 PM
I'm in San Antonio, but I use Dyno's at Maxwell Dodge in Cedar Park, basically Round Rock, Waco, Ft Hood and Killeen...
Phstratton
10-22-2009, 12:55 PM
I'm in San Antonio, but I use Dyno's at Maxwell Dodge in Cedar Park, basically Round Rock, Waco, Ft Hood and Killeen...

Oh so Texas...Okay. That's not tooo far.
Flyinz
10-22-2009, 05:38 PM
OR a small group of us, could pool together, and fly his butt closer to the Midwest. We'd just have to find a dyno we could use...
Phstratton
10-22-2009, 05:44 PM
There's a dyno in Bowling Green, KY.
Ryan Stout
10-23-2009, 06:45 AM
I'm down for gettin a few of us together. I can do minor fuel and spark changes but I don't wanna tackle going from a stock LT1 w/ a MAF and 7psi straight to a H/C 383 with meth, 15psi and SD lol.
MoeHorsePower
10-23-2009, 02:16 PM
Dont get caught up in the MAF vs SD crap. maxing out the maf, cannot run more than 7lbs of boost ect. Mine was supercharged, Stock maf, 2bar with 648 RWHP on pump gas and 722 RWHP on the fast gas. Someone in another forum claims that he first person in the world to do a 2 bar tune with forced induction @ 14lbs of boost on a "STOCK" PCM back in March of 08. Hate to tell him. I did this back in 98...I suggest sticking with the maf. Look up 4sfedz and let him tell you....
Ryan Stout
10-24-2009, 07:51 AM
So it relies on the MAF until it maxes out, then it goes to reading the MAP? Kinda confused but you know more about this than me so I'm just gonna nod my head and agree. PM me if you like so I don't hijack this thread.
Flyinz
10-24-2009, 08:24 PM
There's a dyno in Bowling Green, KY.
I can do that ;)
97 RedSS
10-25-2009, 09:35 AM
Moe, can you PM me an estimated price for dyno tuning my car. Looking at doing N/A then on the spray also. I am in the Dallas area.


Thanks

Cody
Mr_Bond
10-27-2009, 03:37 PM
Welcome :claps:
LT1_Fireman
11-10-2009, 10:41 PM
Glad to see you here Moe.
LT1_Fireman
11-10-2009, 10:47 PM
As props to Moe he did my base tune and with very little work I got 702rwhp with the stock maf and 15.3lbs of boost.