Beehive Springs & Retainers (2 sets)

[The Engineer]

Complete set of PAC-1518 beehive springs w/ Comp Titanium 10 degree retainers and locks. Used about six months weekend bracket racing only. Asking $450.00

http://shutter03.pictures.aol.com/data/pictures/17/002/6F/9D/21/4D/NrTl8Szg4cpAr1oE-9TVJvrQBZXI2LBU0300.jpg

Complete set of Comp 918 beehives w/ Comp 7 degree steel retainers and locks. Used about one year weekend bracket racing only. Asking $100.00

http://shutter05.pictures.aol.com/data/pictures/22/001/7F/E0/63/0A/YS0SyaxPRWm5uLStZFO2UPBR+UATk1q70300.jpg

Warren

[The Engineer]

I can't believe someone doesn't need a good deal on a set of beehives for their LTX hydraulic roller?

The Comps would work well with a hot cam and the PACs would be great with any top-end LTX hydraulic roller.

PM me and we'll make a deal!

Warren

[95Yardbird]

Would the beehives work on a stock motor with 1.6 rockers?

[joelster]

Would the beehives work on a stock motor with 1.6 rockers?

Yes, they will rock. Go get yourself a cam too. I ran the comp 503 with 1.6 rockers and those springs.

[bricez28]

the second set will work with a cc503??

[The Engineer]

the second set will work with a cc503??

Or, a cam bigger than the CC503! I think the PAC-1518s will handle .650" lift at the valve, much more than most H/R cams.

WD

[joelster]

The PAC's are the big dogs of the beehive world. The blue stripe Comp 918's will work on stock heads, or stock heads with a cam, even the CC306.

[hempkat94z]

How much for shipping on the beehives to 72450?