guess my power?

[cls-chicago]

355 9.5:1
ported stock heads
ported intake and 58mm intake hole
58mm tb
longtubes
d1sc procharger, shooting for 12-15 lbs of boost 7.65" crank 3.4" blower
custom cam 236/246 .624/.630(1.6) 114
comp ultra pro mags 1.6 ratio
60lb injectors
twin walbros
twin disc mcleod clutch
6 spd
4.30 gears

blower is maxed at 6800 engine rpm so... im gonna try and take it to there... provided it doesnt explode.


i feel like im forgetting something?

[RoadHawk]

610rwhp

[Fastbird]

Probably in the 600-650 RWHP range. If everything is working together nicely though and the cam isn't too much for the setup, you could see in the ~700 range.

[cls-chicago]

well went to the dyno on dec 2nd, dyno was borked out, something is causing boost to drop at like 6100rpm... going back when i get back in town hopefully.

anyways, the calibration pull netted 8xx hp, the second run full throttle netted 9xx hp, tuner said zero boost... wtf.. so i got to looking around , it blew the charge pipe off right in front of the maf lol. i double clamped that bastard and made the next pull... 13xx hp, then the final 6100rpm pull netted 1568hp.

at least the afr is 11.5 all the way through. gotta fix some problems then go back and lay down some power.

[mrbadlt1]

1568?! is that SAE corrected?

[mrbadlt1]

btw where in florida are you?

[tomsws6]

uh................................................ ......

[BOOSTNU]

Are you sure your not running a f1 instead of a d1?

[cls-chicago]

i said the dyno was borked out , i got the SAME responses on another forum.

[cls-chicago]

Are you sure your not running a f1 instead of a d1?


soon enough:secret:

[RealQuick]

355 9.5:1
ported stock heads
ported intake and 58mm intake hole
58mm tb
longtubes
d1sc procharger, shooting for 12-15 lbs of boost 7.65" crank 3.4" blower
custom cam 236/246 .624/.630(1.6) 114
comp ultra pro mags 1.6 ratio
60lb injectors
twin walbros
twin disc mcleod clutch
6 spd
4.30 gears

blower is maxed at 6800 engine rpm so... im gonna try and take it to there... provided it doesnt explode.


i feel like im forgetting something?

Who ported the heads?

You may want to switch those gears out for something a little longer... 3.42's or 3.73's.

[cls-chicago]

Who ported the heads?

You may want to switch those gears out for something a little longer... 3.42's or 3.73's.


oh god tell me about it