FS: lt4 hot cam, stock heads, block, stall, headers, and more

[Milk Man]

BBK twin 52mm tb $150
holeshot 2400 stall for 700r4 (5k miles) $200
GM lt4 hot cam setup (about 200 miles) $400
trickflow 7.2 chromoly pushrods (150 miles)$50 (sale pending
aluminum lt1 heads $200 (2 stripped exhaust holes, rear on each)
lt1 block with spun rod bearing $ $200
lt1 aluminum intake manifold SOLD!
BBK shorty headers and y pipe (5k miles) $150

might have other parts and will have pics up tomorrow hopefully

threw a rod, heads are fine and it ran for about 5 mins to get home after it started tickin. bought a whole new motor so all this is for sale. everything located in wichita kansas and buyer pays shipping. prices are obo

[KissMyWhtSS]

how much for just the rockers?

[Milk Man]

sorry i wont split the kit unless all is spoken for

[Milk Man]

ok guys heads and intake are sold. everything else still for sale...

[kugss]

how much for shipping the headers to 15132 and any pics

[IronOutlaw]

How much for just the cam?

[2XR95Z28]

Is there any difference in the Hot Cam kit for 93-94 lt1's than 95-97's? i read somewhere about the cam gear that goes into the opti-spark is different. If you still have the kit in a month or so i'll give you 350 for it.

[KissMyWhtSS]

Is there any difference in the Hot Cam kit for 93-94 lt1's than 95-97's? i read somewhere about the cam gear that goes into the opti-spark is different. If you still have the kit in a month or so i'll give you 350 for it.
dowel pin is longer on the 95+

[2XR95Z28]

so the kit wouldnt work on my 95 if its for a 93 correct?

[KissMyWhtSS]

so the kit wouldnt work on my 95 if its for a 93 correct?
You'd need to replace the 93-94 dowel pin for a longer one for the 95+. I believe it needs to stick out .625" out of the cam. It's about $5 for one at GM I believe.

[david068513]

what are the specs on the cam?



Intrested in the stall. PM me. :D

[2XR95Z28]

I'll have to see what i can do about gettin money for the cam kit, preety interested. Could you email me some pics to jmnewcomer@ymail.com

THanks

[hempkat94z]

Do you still have the throttle body? If so could you send some pics to hempkat94z@yahoo.com Thanks

[boosted95z]

Interested in the block. Know how much shipping to 44720 would be?