Nitrous Outlet LT1 Plate Kit

[gregrob]

It showed up today! Thanks to Chris @ N2O outlet. Dave, Ray, give this guy a raise. He was exemplary in helping me out. Took a lot of extra time to help me find an MSD harness I needed, and never pressured me to buy the kit.

I've talked to Grant before and he was great too, just out sick when I called to order the kit.

Anyway

The kit looks great as well. Very high quality and the instructions are well-written and easy to follow.

I cant wait to get it all installed and start hosin'!

[Brady21x]

Just finished installing mine last night and your gunna love it it looks super clean, if ya have any questions let me know I'll be bale to help ya!! would take some pics but I leave for school early tm mornin :(

[gregrob]

Thanks Bro I might hit you up!

[Brady21x]

yea its more of a hassle than hard to install i did mine in about 2 days and that was pullin the seats out and all the plastic paneling on the passenger side so i could peel the carpet up and tuck the wires under that and I mounted my ignition box under my passenger seat on the rear floorboard and it fits there really nice cuz when the seats all the way back you can barely see it and yet it gives some foot room to, but stupid question whatta ya think my car will run with just a CAI and GMMG catback with either a 150 shot or 100 shot beings they didnt have 125 jets? Ive got about every safety thing in the book, mallory 685 box, window switch fpss, TPS switch but i still need to get a walbro 255 down the road, dont plan on sprayin till next spring when i can get it dynotuned.

[gregrob]

I'd say you could see mid/low 12's on 150 shot depending.

I dont know how the hell your gonna have it hooked up all that time and not spray it. I wouldnt be able to resist.

[Chopstix]

Hey Brady,
I assume the diagram worked out for you OK.

To both of you guys.
Thanks again for letting us help,
Ray

[Brady21x]

yea the diagram worked awsome thanks for that!, but I cant get the switch panel to stay down in the ashtray area
any tips?

and I wana wait till i know it's gunna run right and not blow it up

[OutCast]

Can you guys post some pics of your installs. I've been talking to grant for a couple of weeks about using this on a 93 intake. Seems the only difference will be a shorter line to the fuel noid. I'm looking to replace my TNT plate kit with this and control it with an FJO. Anyhow, some pics would be good since all I've seen is the ones they posted on another site. Thanks!

[Brady21x]

yea i can get ya some pics this weekend once I get back home

[Formula383]

What pics have you seen? Do you want some of my install?

[OutCast]

I've only seen what was posted in the following link

http://www.camaroz28.com/forums/showthread.php?t=703816

I appreciate any additional pics you might have

thanks,

[Formula383]

This has been on LS1Tech for a while. Just didn't know if you had seen it. I have a few more pics somewhere with the dedicated fuel system.

Nitrous Outlet LT1 Plate Kit
http://farm4.static.flickr.com/3148/2716774837_1bf31c6f45_b.jpg

Solenoids (Nitrous - Purge - Fuel)
http://farm4.static.flickr.com/3086/2716774851_e6eaaaabdf_b.jpg

View from driver side
http://farm4.static.flickr.com/3212/2716774767_b39573875a_b.jpg

Another view from driver side. Shows hard-line from fuel rail to fuel solenoid.
http://farm4.static.flickr.com/3173/2716774887_17b27f606d_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel
http://farm4.static.flickr.com/3192/2716774973_7dd5ce9ba6_b.jpg

Nitrous Outlet Ashtray 4-Switch Panel (Armed)
http://farm4.static.flickr.com/3254/2716774781_792ea2c0b5_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch
http://farm4.static.flickr.com/3132/2717588778_9bced4ce1b_b.jpg

Nitrous Outlet Single Stage Window Switch/WOT Switch (Armed)
http://farm4.static.flickr.com/3269/2717588804_cc1b45f6fd_b.jpg

MSD Digital 6 Plus, Pulls 4 deg. of timing when system is armed
http://farm4.static.flickr.com/3244/2717588760_c4f8ccff2d_b.jpg

Nitrous Outlet 10 lbs Bottle, 860 F-body Mount, 860 Heated Bottle Bracket
http://farm4.static.flickr.com/3030/2717588688_34d618e773_b.jpg

Bottle showing heater pressure switch, pressure gauge and weather pack connectors
http://farm4.static.flickr.com/3182/2716774635_641f4c4a61_b.jpg

Transparent view of bottle behind interior panel
http://farm4.static.flickr.com/3201/2717721632_5e60221cf5_b.jpg

Hidden bottle in spare tire area
http://farm4.static.flickr.com/3278/2717588650_54012a9217_b.jpg

Autometer Digital Pro Shift Light
http://farm4.static.flickr.com/3081/2716774591_a8950362cb_b.jpg

Autometer Digital Pro Shift Light, illuminated blue
http://farm4.static.flickr.com/3020/2716774821_ce9ef4f38e_b.jpg

Nitrous Outlet F-Body Center Console Switch Panel
(I'm using the buttons for my line lock. Autometer Cobolt II Nitrous Press Gauge. Wire in the console is for my iPod.)
http://farm4.static.flickr.com/3123/3882417764_d08987b2cf_b.jpg

[AChotrod]

I want^^^^^^^^

[Brady21x]

I copied your ignition box under the passenger side seat idea Formula lol works pretty dang good

[Brady21x]

I got mine all setup last week but I'm gunna wait till next spring to get it Dynotuned and spray it then, so hrere are a few pics of my setup..........

http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0628.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0629.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0634.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0640.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0644.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0645.jpg
http://i571.photobucket.com/albums/ss154/Brady_95c/IMG_0635.jpg


dont mind the Purge line, I have yet to figure out where I want to vent that at, and I plan on cleanin up the wiring and zipin it all together to look nicer

[1FASTSS]

Looks good. Wish I had the bottom exit noids. Cleans it up even more.

[OutCast]

Thanks for the pics, calling Grant today to finalize the order but it will be a couple/few weeks before I get it as they are waiting to receive some 58mm plates. It's fine though, I've got the car going in for a 10-point cage and need to work on coil mounting options for LTCC conversion.

[mark97ta]

i look at everyones engines and i never see the traction control device over the drivers side valve cover. how do you get rid of it and what else do i need to do.looking to install valve covers and i think this is going to hamper the situation.
Mark

[DopdBrd]

Just FYI, I ran a 12.66 with a 2.14 60' in my bolt on car. LT's, ORY, and GMMG exhaust with a factory ram air box and hood. This was on a 150 shot through a Nitrous Works Plate kit.

I know the Nitrous Outlet one flows better and you will probably see more power at the wheels, so a sub 12.5 with decent traction should definetly be possible.

[cammedz28]

where do i go to purchase that exact kit?

[Brady21x]

http://www.nitrousoutlet.com/catalog/product.asp?category=33&section=135&group=580&product=2809

:)

[mrbadlt1]

damn $1300, but it does look like a very nice kit.

[Joker Z28]

Where do you guys get those mounts for the spare tire area?

[MEAN LT1]

Where do you guys get those mounts for the spare tire area?

www.nitrousoutlet.com (http://www.nitrousoutlet.com)

[cammedz28]

thanks Brady_95c

[Chopstix]

damn $1300, but it does look like a very nice kit.


That price includes all of the accessories as well...here is just the kit.
The 10# kits are $759 by themselves.

you can find them on this page, under 93-97 LT1 Specific
http://www.nitrousoutlet.com/catalog/categories.asp?category=14&section=37

[Speed Inc.]

yes..keep in mind it's not just a simple system, but a complete kit with acc. as Ray noted.

email me if you want some prices and we offer free shipping with our Nitrous Outlet kits ;)

[OutCast]

Working on my install for this kit right now. So far it has been pretty straight forward but there are some minor modifications if you have a 93 intake.

http://ltxtech.com/forums/picture.php?albumid=248&pictureid=1952

http://ltxtech.com/forums/picture.php?albumid=248&pictureid=1950

and a little something to keep it controlled how I want it.

http://ltxtech.com/forums/picture.php?albumid=248&pictureid=1951

[Joker Z28]

Pretty sweet, I like your LS1 coils looks sweet.