Engine bay clean up

[R3DLT1]

How is it done? How do you clean up the left side of the engine bay. I want to get all the weires out of sight

Like this for example olmastascrilla engine bay

http://i27.photobucket.com/albums/c172/timmyalias/shinymaro12.jpg

[PUMPKINMAN]

that is one sweet engine bay... now wheres the power steering resovoir (spelling- where u put the power steering fluid)?

[olmastascrilla]

It doesnt have powersteering I did the low mount alternator. As far as the wires on the left side I did the "wire mod". There are some awesome write ups for this on ls1tech.com. You have to drill a hole and route the wires inbetween the inner fender cover. I also moved the fuel lines and hood latch under the inner fender on the other side(also write ups for this on ls1tech, and another hole will have to be drilled). lmk if you have any questions I would be more than happy to try and answer them.

[PUMPKINMAN]

It doesnt have powersteering I did the low mount alternator. As far as the wires on the left side I did the "wire mod". There are some awesome write ups for this on ls1tech.com. You have to drill a hole and route the wires inbetween the inner fender cover. I also moved the fuel lines and hood latch under the inner fender on the other side(also write ups for this on ls1tech, and another hole will have to be drilled). lmk if you have any questions I would be more than happy to try and answer them.



how about links to such write-ups?

[olmastascrilla]

http://www.ls1tech.com/forums/appearance-detailing/173263-completed-wire-mod-tutorial-inside.html

http://www.ls1tech.com/forums/appearance-detailing/570128-lt1-guys-relocating-fuel-rail-lines.html

Theres probably more too but these are the ones I used.

[R3DLT1]

Thanks man! if i have any questions i'll ask

I all ready re routed the fuel lines.