PDA

View Full Version : 1994 Z28 with cam



hempkat94z
08-02-2009, 05:31 PM
I have a 1994 Z28 Camaro with a .30 over 350 LT1. The rebuild was done by a local Chevy dealership here locally before I bought the car at 78,000 miles. Since I bought the car I have installed 3.73 gears, Midwest 3000 stall, K&N CAI, Vortech aluminum elbow, TPIS 52mm throttle body, Pacesetter long tube headers, custom x-pipe, dumped at the rear end through dynomax dullet mufflers,Comp Cams chrome moly pushrods, Comp cams 918 beehive valve springs, Comp Cams locks and retainers, Comp Cams guide plates, with a Comp Cams custom grind cam that measures 230/236 .577/.572 lift on a 112 LSA, Comp Cams 1.6 roller tip rockers, new hydraulic roller lifters, with a PCMforless mail order tune that has been modified by meThe car comes with the cable so you can datalog and retune it. The car also comes with Lakewood drive shaft loop and SLP 3 way sub-frame connectors. The car is also a hardtop car and absolutely rust free with.

I have taken the car to the strip once since I put the cam in and with the original cam tune it ran a 8.10 with a 1.77 60'. The car was cutting up out of the whole. I have since changed the plugs and adjusted the tune and the car really runs better. The car should run in the 7.70-7.90 range with what it has.

The interior has some stains that I am sure will come out with a good detail. The car is 100% street legal and I do drive it. I have put less then 3000 miles on it since the cam swap. The car also has 2 seats of rear wheels. One set has Mickey Thompson 255/50 R16 drag radials and the other set has new hankook street tires that have less then 5000 miles.

The car has a clean title but was wrecked at one time. Everything was fixed alright but the radiator support is a little beat up and pushed back a little and the hood and front passenger fender needs to be repainted but the car drives straight and has new brake pad all around with new rotors up front. The head liner is falling and the driver side seat bolster is tore. I am about to buy a set of black leather seats out of a T/A.

I am asking $6000 or BEST OFFER or I would like to trade for a 70-81 Camaro or a 68-78 Nova.

I have more pictures if you are interested just PM me your email.

http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0949.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0948.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0950.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0951.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0952.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0953.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0955.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0956.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0957.jpg
http://i234.photobucket.com/albums/ee211/1994z28lt1/94%20Z28/100_0948.jpg

hempkat94z
08-02-2009, 06:13 PM
I posted this on racingjunk first but MEANLT1 was the one who actually did the tune adjustments. He did a good job.

hempkat94z
09-30-2009, 08:59 PM
I found a car I want!!!!!! New Price $5250 firm

hempkat94z
10-08-2009, 06:33 AM
Car is gone!!!!!!