blackbird1084
07-29-2009, 01:14 AM
I'm trying to figure out what the quickest possible time is I can run with my current motor combo. I'm also trying to see what the best 60ft I can get. My current setup is a 355,stock rods,stock crank,kb hyper pistons,11.3:1 compression,cc 306 cam,scorpion 1.7i/1.6e roller rockers,afr 180cc street heads,afr rev-kit,edelbrock intake,edelbrock 58mm tb,stock maf sensor with a granatelli housing,ford motorsports 30lb injectors,walboro 255 fp,csr ewp,pacsetter lt's,summit x-pipe,flowmaster outlaw mufflers,edelbrock strut tower brace,edelbrock non-adj ta,hotparts.com dd subframe connectors,hotparts.com lca relocation brackets,umi non-adj lca's,umi non-adj panhard rod,spohn 1" rear swaybar,qa1 adjustable coilovers on front,qa1 adjustable shocks on rear,10 bolt with zexel torsion posi,3.73's and m/t 275/50/15 et street radials. The car is running on the tune for my last setup which was a straight 1.6/1.6 rocker combo,ported stock heads and 10.5:1 compression. Everything else is the same. I'm wanting to get it tuned by ed wright,change the subframe connectors to umi cromoly dd's,get a 6-point cage,get a umi adj ta,also umi k-member with a-arms,change the 3.73's to 4.10's and get a set of 275/60/15 et street radials. I'd like to get the car down around the 11.4x range if it's possible.