6spdZ
07-26-2009, 06:49 PM
2000 camaro SS clone
Car has been a V8 car since Thanksgiving of 07' and started as a Hot cam only LS1 and was that way for about 1.5 years and then blew the LS1 up and went with at 6.0 iron H/C/I...
Car has 118k miles and we replaced speedo with a 150mph(replaced v6 120mph)
Had Shortblock assy by a local Machine shop who also Checked over and Surfaced Heads..
Lookin to TRADE for Formula(LS1 or LT1) 6spd OR $9,500 cash OR trade and cash
Let me know what ya got!
The Good:
Iron LQ4
Patriot Stage 3 Heads 2.08 intake, 1.60 exhaust milled .30 thousandths
MS4 Camshaft
LS6 intake(painted Silver and SLP logo)
Pacesetter long tubes
Mufflex 3" Y-Pipe to 4" cat back single in and out
Arp Rod bolts
Arp Main studs
Arp Head studs
BMR Adjustable Tourqe arm
SFC
Balanced bottom end
Built 4l60E with PI 3600 converter
Stock 10 bolt with 3.42's
Corvette Fuel Rail Covers
10 Spoke SS wheels
SS Hood
SS Spoiler
Both Hood & spoiler came off 2002 Anniversary SS
The Bad:
Paint chips on front facia(see pic)
Dent on pass rear quarter behind door(see pic)
Driver seat seam coming apart slightly(see pic)
I know Im forgetting some things but if I remeber Ill update..
Post or PM
http://i241.photobucket.com/albums/ff219/krism6903/jason001.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason002.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason003.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason004.jpg
EXCUSE THE MESS
http://i241.photobucket.com/albums/ff219/krism6903/jason007.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason008.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason009.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason013.jpg
Kris
Car has been a V8 car since Thanksgiving of 07' and started as a Hot cam only LS1 and was that way for about 1.5 years and then blew the LS1 up and went with at 6.0 iron H/C/I...
Car has 118k miles and we replaced speedo with a 150mph(replaced v6 120mph)
Had Shortblock assy by a local Machine shop who also Checked over and Surfaced Heads..
Lookin to TRADE for Formula(LS1 or LT1) 6spd OR $9,500 cash OR trade and cash
Let me know what ya got!
The Good:
Iron LQ4
Patriot Stage 3 Heads 2.08 intake, 1.60 exhaust milled .30 thousandths
MS4 Camshaft
LS6 intake(painted Silver and SLP logo)
Pacesetter long tubes
Mufflex 3" Y-Pipe to 4" cat back single in and out
Arp Rod bolts
Arp Main studs
Arp Head studs
BMR Adjustable Tourqe arm
SFC
Balanced bottom end
Built 4l60E with PI 3600 converter
Stock 10 bolt with 3.42's
Corvette Fuel Rail Covers
10 Spoke SS wheels
SS Hood
SS Spoiler
Both Hood & spoiler came off 2002 Anniversary SS
The Bad:
Paint chips on front facia(see pic)
Dent on pass rear quarter behind door(see pic)
Driver seat seam coming apart slightly(see pic)
I know Im forgetting some things but if I remeber Ill update..
Post or PM
http://i241.photobucket.com/albums/ff219/krism6903/jason001.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason002.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason003.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason004.jpg
EXCUSE THE MESS
http://i241.photobucket.com/albums/ff219/krism6903/jason007.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason008.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason009.jpg
http://i241.photobucket.com/albums/ff219/krism6903/jason013.jpg
Kris