window switch installation ?

[somlt1]

i picked up a msd distributorless window switch pn89561 and am wondering if any one has a wiring diagram for a switch like this i picked up use off another forum. i have a yellow, red,orange, white,ground and three gray wires . i saw another diagram and have the red , yellow and ground go the white i beleive is for the rpm witch i do not know where i can get a close rpm wire if anybody can help i would appriciate it very much!

[somlt1]

also its going on a 97 if it matters

[somlt1]

also its going on a 97 if it matters

[greenz28]

i picked up a msd distributorless window switch pn89561 and am wondering if any one has a wiring diagram for a switch like this i picked up use off another forum. i have a yellow, red,orange, white,ground and three gray wires . i saw another diagram and have the red , yellow and ground go the white i beleive is for the rpm witch i do not know where i can get a close rpm wire if anybody can help i would appriciate it very much!

I'm not sure about wiring the ws, but I got my tach signal from the pcm. It should be on the red connector. If I'm not mistaken it is the only white wire in the red connector.

[Grant@nitrodaves]

It has 3 Grey wires? The instructions (http://www.msdignition.com/instructiondownload.aspx) on their website only have 1 Grey wire.