PDA

View Full Version : Easiest place to wire a kill switch?



brickonwheels
06-22-2009, 06:45 AM
So my car got broken into recently and that asshole tried to hotwire it but was only able to break my steering column. For added insurance, I am wanting to wire in a kill switch that I can hide under the seat or something. Where is an easy place to tap into the fuel pump wiring somewhere close to the driver's seat?

LT1RUNNER
06-22-2009, 12:03 PM
I wired mine from the coil. My switch sits right under the ________ to the side of the _______ and it's easy to reach without being in plain view or easliy found.

Firebat
06-22-2009, 01:05 PM
The fuel pump wiring should run right along the drivers side door to the center of the backseats. If you pull the carpet, you will find it. You could also do similar stuff like mentioned above like a kill switch for the pcm fuse, injector fuses. There should also be a fuel pump relay under the dash somewhere too. Or if you really want to play around with relays, could wire it up so it will only start when you have the park lights on or something like that.

McCauleyWB
06-22-2009, 02:25 PM
There's Franker's method too:
http://www.bfranker.badz28.com/fbody/starterkill.htm

LT1RUNNER
06-22-2009, 02:54 PM
Even better!^^^^