What size injectors?

[boosted95z]

What size injectors do you guys recommend for my build? I currently have 44#. The car will have a 355 @ 9.2:1 CR running a 2.95" pulley (about 10-12 psi) on a v1 strim. Do I need bigger injectors? The car was running rich before, so I am leaning towards no. Advice?

[BLOWNDFIZ]

When I was at ~8psi on 48lb injectors they were borderline. When I upped the boost and switched to the T-trim I upgraded to 75lb low impedence.

IMO, just get a set of 60's and give yourself room to grow because you will add more boost.

If you really want to know if the 44's are good enough, you need to get on a dyno, check the AF, get your RWHP, adjust FP accordingly as long as you keep you DC in check you will be fine.

[boosted95z]

Where can I find a set of 60#? I have looked all over today, no dice.

[Z28pr0jekt]

racetronix/siemens

[boosted95z]

Thanks, I found a set on ebay I'm bidding on. Siemens 60#. :metal:

[Z28pr0jekt]

yep that's them

[boosted95z]

Good deal, bought them for $360 shipped. :metal: Thanks guys.