Fastest LTx List...Lets get it started! [Archive]

View Full Version : Fastest LTx List...Lets get it started!

Pages : [1] 2

Sahara54

05-21-2009, 02:36 PM

Posting times is fine but lets get the list going. Always give you something to shoot for this summer. :secret:

In order to be added to the list please post your times and any updates in the list format. Times posted that are not in the format will not be added until they are changed.

Also add @Sahara54 (http://ltxtech.com/forums/member.php?u=4842) to your post for me to be notified.

Thanks.

#XX Screen Name-
1/4 et - PA/NA XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - X.XX

Car (example 95 Z28) ~ Engine Size ~ Transmission ~ Rear end ~ Gears ~ Extra info

Now on to the list!!!

#1 Tony Shepherd
1/4 et - PA 8.45 ~ 1/4mph 161.57 ~ 1/8 et 5.43~ 1/8 mph 130.37~ 60ft - 1.29
93 Camaro Z28 (N20)

#2 SSmity
1/4 et - PA - 8.501 ~ 1/4mph 158.06 ~ 1/8 et - 5.42 ~ 1/8 mph 128.70 ~ 60ft - 1.227
94 Caprice ~ PG ~ 300 NX 2 Stage Plate ~ 33x16.5x15

#3 Ponyhntr -
1/4 et - PA - 8.503 ~ 1/4mph 155.53 ~ 1/8 et - 5.527 ~ 1/8 mph 133.70 ~ 60ft - 1.398
96 Camaro Z28 ~ A3 ~ ProCharger F1A ~ Q16 ~ Moser M9 ~ 3.89

#4 Milehighz28
1/4 et - PA 8.70 ~ 1/4 mph - 156.88 ~ 1/8 et - 5.58 ~ 1/8 mph - 126.76 ~ 60ft - 1.36
93 Z28 76mm Turbo~ 355 ~ Powerglide ~ 12bolt ~ 3.42

#5 Slammed98gmc
1/4 et - PA 8.72 ~ 1/4 mph – 156 ~ 1/8 et - 5.62 ~ 1/8 mph - 125 ~ 60ft - 1.32
1998 GMC Sonoma ~ Hughes Performance PG ~ Hughes 5000 stall~ 8.5 10 bolt ~ 3.42

#6 JakesZ28
1/4 et - PA 8.957 ~ 1/4mph 151.6 ~ 1/8 et - 5.742 ~ 1/8 mph 122.46 ~ 60ft - 1.349
94 Camaro Z28 ~ glide ~ ptc converter ~ fabbed 9" ~ 3.89

#7 8SEC6SPD
1/4 et - PA 8.97 ~ 1/4mph 155.23 ~ 1/8 et - 5.80 ~ 1/8 mph 123.28 ~ 60ft - 1.349
96 Camaro SS ~ EFI ~ Liberty's M6 ~ Mcleod ~ Moser ~ 3.89

#8 Jason Brisson (OutlawZ)
1/4 et - PA 9.06 ~ 1/4mph 153.8 ~ 1/8 et - 5.76 ~ 1/8 mph 122.1 ~ 60ft - 1.35
95Z28 ~ TH400 ~ ATI 4400 stall ~ 9" ~ 3.89

#9 slow lt1
1/4 et - PA - 9.45 ~ 1/4 mph - 140.61 ~ 1/8 et - 5.97 ~ 1/8 mph - 113.64 ~ 60ft - 1.31
1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

#10 SnakeKilla
1/4 et - PA – 9.70 ~ 1/4 mph – 136.97 ~ 1/8 et – 6.22 ~ 1/8 mph – 110.57 ~ 60ft – 1.37
9X Trans Am ~ TH-400 ~ Converter? ~ Rear end? ~ 4.10’s

#11 halfasshotrods
1/4 et - PA- 9.75~ 1/4 mph - 138~ 1/8 et - 6.25 ~ 1/8 mph - 112 ~ 60ft - 1.44
94 Z28~383~F1 Procharger ~TH400 w/ brake~4500 stall - 9"~370 gears ~3700lbs

#12 FUEL
1/4 et - NA - 9.775 ~ 1/4 mph - 136.59 ~ 1/8 et - 6.193 ~ 1/8 mph - 110.22 ~ 60ft - 1.379
94 camaro~ th400 ~ 3800 j&w ~ moser 9 ~ 370

#13 - Ray@Nitrodaves.com
1/4 et - PA - 9.826 ~ 1/4 mph - 132.02 ~ 1/8 et - 6.303 ~ 1/8 mph - 111.83 ~ 60ft - 1.424
94 Formula ~ 700r4 ~ Goebel 3800 stall ~ 12 Bolt ~ 3.73 ~ 3220# ~ 200 shot

#14 Twisted Z
1/4 et - PA - 9.827 ~ 1/4 mph - 137.37 ~ 1/8 et - 6.266 ~ 1/8 mph - 110.51 ~ 60ft - 1.414
SSEFI 380 LT1~ SSEFI 3L80~ A-1 4~4000 stall ~Nitro Dave's MM .088 jet N2O,~3.73 12 bolt~3420Lbs

#15 Speed Inc (Larry)
1/4 et - PA - 9.85 ~ 1/4mph - 138 ~ 1/8 et - 6.29 ~ 1/8 mph - 110 ~ 60ft - 1.41
97 Z28 ~396, SI H/I, LE H/R, FLT7 w/SS3600, S60 w/ spool & 3.73

#16 SSlowBoat-
1/4 et - PA 9.905 ~ 1/4 mph - 133.3 ~ 1/8 et - 6.245 ~ 1/8 mph - 109.86 ~ 60ft - 1.266
94 Firebird - 381 Solid Roller - Turbo 400/ FTI SST 9" Converter - S60 4.10 gear - 275/60/15 ET Street R - 200 Shot single nozzle

#17 Casper 383 -
1/4 et - PA - 9.94 ~ 1/4 mph - 137 ~ 1/8 et - ??? ~ 1/8 mph - ??? ~ 60ft - 1.43
93 Camaro Z28 ~ TH350 ~ Goebel 4000 stall ~ 12-bolt ~ 3.73

#18 Sseeya
1/4 et - NA 9.942 ~ 1/4 mph - 133.57 ~ 1/8 et - 6.312 ~ 1/8 mph - 109.10 ~ 60ft - 1.359
93 Z/28 - 396 NA - Turbo 350 - Strange 12 bolt w/4.30 gear - 28X10.5 Pro Bracket Radial

#19 GuillaumeC
1/4 et - PA - 9.964 ~ 1/4 mph - 141.23 ~ 1/8 et - 6.439 ~ 1/8 mph - 7.35 ~ 60ft - 1.62
95 DGGM Caprice ~ TH400 ~ TT 355 ~ 4200#

#20 Travismcgill2000
1/4 et - PA - 9.98 ~ 1/4 mph 135 ~ 1/8 et 6.34 ~ 1/8 mph 108 ~ 60ft 1.40
94 trans am~ 355ci ~ 4l60~ 3400lb~ Nitrous Outlet plate 200 shot

#21 roadtrip120
1/4 et - NA - 10.075 ~ 1/4mph 135.6 ~ 1/8 et - 6.47 ~ 1/8 mph 108 ~ 60ft - 1.48
94 Camaro Z28 ~ 385 ,Dart CNC LT1 pro 1, T56 Faceplated, Solid Roller, Single Plane, Jessel Belt Drive, XFI

#22 Jayz28
1/4 et - PA - 10.13 ~ 1/4 mph - 135.267 ~ 1/8 et- 6.54 ~ 1/8 mph - 108.495 ~ 60ft - 1.59
94 Camaro Z28 ~ 4L60E ~ 383ci HCI ~ 10 Bolt ~ 3.73

#23 Jolster-
1/4 ET- NA- 10.15 ~ 1/4mph- 133.65 ~ 1/8 ET- 6.47 ~ 1/8mph- 106.78 ~ 60ft- 1.427
94 Z28 ~ TH350 - 5200 stall ~ S60 ~ 3.73

#24 96LT1355Z28-
1/4 et - NA 10.16 ~ 1/4mph 136 ~ 1/8 et - 6.53 ~ 1/8 mph 106.60 ~ 60ft - 1.50
96 Z28 ~ SR 385 ~ Faceplated M6 ~ MWC 9" ~ 4.30's ~ 3200lbs w/driver

#25 green93ta-
1/4 ET - NA - 10.18 ~ 1/4 mph - 129.57 ~ 1/8 et - 6.42 ~ 1/8 mph - 105.36 ~ 60ft - 1.31
93 Trans Am ~ th350 ~ boss hog 3200 ~ 9in ford ~ 3.89

#26 ShownoMercy
1/4et - PA - 10.20 ~ 1/4mph 139.89 ~ 1/8 et XXX~ 1/8 mph XXXX~ 60ft - 1.8
SNM - 1995 Z28 - PT76gts - 383ci - 24x - 4L80e - S60

#27 Transammann 25 -
1/4 et - PA - 10.20 ~ 1/4mph - 138 ~ 1/8 et - ??? ~ 1/8 mph - ??? ~ 60ft - 1.88
96 Trans Am ~ T56 ~ Spec stage 3+ ~ welded tubes and braced 10 bolt 4.56 motive gears.

#28 Quik95lt1
1/4 et - NA -10.26 ~ 1/4 mph - 131.56 ~ 1/8 et - 6.51 ~ 1/8 mph - 104.4 ~ 60ft - 1.41
95 Z28 3470lbs ~ 4L60E 5k Vigilante ~ 385ci LT1 Ai HCI ~ Strange S60 ~ 4.56 Locker

#29 Ryan Stout
1/4 et - PA - 10.370 ~ 1/4 mph - 147.46 ~ 1/8 et - 7.079~ 1/8 mph - 120.05 ~ 60ft -1.988
89 Mustang ~ Glide ~ 383 ~ GT88 ~ 8.8 ~ 3.08

#30 Agenthol302
1/4 et - PA 10.38 ~ 1/4 mph - 127 ~ 1/8 et - 6.55 ~ 1/8 mph - 103 ~ 60ft - 1.38
94 Z28 ~ 396 ~ TH400 W/4500 ~ 9in W/3.70 ~ 100 N2O ~ 9x29 Tire

#31 Pauly Walnuts
1/4 et - FL- 10.42 ~ 1/4 mph - 128.7 ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - 1.42
396 LT2.5 (Lt1 block, Lt4 heads and intake) , 125 shot, Vig 3200, 3.73's, 3600lbs.

#32 1FASTSS
1/4 et - PA - 10.47 ~ 1/4 mph - 129.12 ~ 1/8 et - ??? ~ 1/8 mph - ??? ~ 60ft - 1.48
96 Z28/SS ~ 4L60E - 3800 Yank ~ S60 ~ 3.73

#33 DawDaw
1/4 et - NA - 10.58 ~ 1/4mph 125.7 ~ 1/8 et - 0.000 ~ 1/8 mph 000.00 ~ 60ft - 1.41
95 Camaro Z28 ~ TH400 ~ H/C 383 ~ E85 ~ 3.89's ~ Mickey 275 Pro

#34 n20camaro
1/4 et - PA - xx.xx 1/4 mph xxx.xx 1/8 et 6.76 1/8 mph 101.9 60' 1.48
95 Z – 383~H/C/I~th400~9”~drag radials~100 shot

#35 Mystery Bird-
1/4 et -NA 10.78 ~ 1/4 mph 124 ~ 1/8 et 6.83 ~ 1/8 mph 99.17 ~ 60ft 1.4695 Firebird ~ 381 ~ 4L80E ~ 3.90’s~ Stock PCM and Opti

#36 Badhawk-
1/4 et - NA - 10.92 ~ 1/4 mph - 121.44 ~ 1/8 et -6.903 1/8 mph - 98.30 ~ 60ft - 1.46
94 Firehawk ~ 4L60E - 4000 Circle D ~ Moser 12-bolt ~ 4.10

#37 Formula 383 (need update)
1/4 et - PA - 10.93 ~ 1/4 mph - 129.9 ~ 1/8 et - 7.15 ~ 1/8 mph -100.99 ~ 60ft - 1.78
97 Formula ~ M6 - S60 ~ 4.10

#38 Engineer-
1/4 et - NA - 10.97 ~ 1/4 mph - 126.9 ~ 1/8 et - 6.98 ~ 1/8 mph 97.47 ~ 60ft - 1.49
97 Camaro Z28

#39 "NO SHOW"-
1/4 et - 10.978 ~ 1/4 mph - 116.81 ~ 1/8 et - 7.007 ~ 1/8 mph - 97.69 ~ 60ft - 1.44
Car (92 RS Camaro) ~ Transmission T56 ~ Centerforce ~ 9" ~ 4.30's

#40 OVA1-
1/4 et - PA - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - 7.28 ~ 1/8 mph - 95.7 ~ 60ft - 1.68
96 Z28 ~ Performabuilt Lvl-2 4L60E ~ Yank SS3600 ~ 10 Bolt-Eaton Locker ~ 4.10s

#41 Blowndfiz-
1/4 et - PA - 11.30 ~ 1/4 mph - 125.80 ~ 1/8 et - 7.35 ~ 1/8 mph - 97.15 ~ 60ft - 1.74
94 Z28 ~ T56 ~ McLeod Street Twin ~ Moser 12 Bolt ~ 3.73

#42 Zohan
1/4 et - PA - 11.42 ~ 1/4 mph - 123.09 ~ 1/8 et - 7.35 ~ 1/8 mph - 95.44 ~ 60ft - 1.62
93 Camaro Z28 ~ TH350 ~ Goebel 4000 stall ~ 12-bolt ~ 3.73

#43 Chopstix-
1/4 et - PA/NA 11.510 ~ 1/4 mph - 116.68 ~ 1/8 et - 7.323 ~ 1/8 mph - 94.23 ~ 60ft - 1.585
95 Formula ~ stock 350 ~ Th400 ~ 12 Bolt ~ 4.30 ~ 2925#, +1483' DA ~ Bolt on gen2 LTx

#44 SexyTransAm
1/4 et - PA - 11.60 ~ 1/4 mph - 116.8 ~ 1/8 et - 7.40 ~ 1/8 mph - 92.9 ~ 60ft - 1.60
95 Trans Am ~ Performabuilt 4L60E~ 3200 RevMax ~ stock 10 ~ 3.42

#45 AChotrod
1/4 et - NA - 11.682 ~ 1/4 mph - 119.12 ~ 1/8 et - 7.5 ~ 1/8 mph -94.53 ~ 60ft - 1.68
96 Formula WS6 ~ M6 - McLeod Street Twin ~ S60 ~ 4.10

#46 Biggriff-
1/4 et -PA~ 11.84 ~ 1/4 mph - 112.57 ~ 1/8 et - 7.53 ~ 1/8 mph - 91.65 ~ 60ft - 1.69
93 Z28~"Pretty Much Stock" ~ A4 ~ Vig 3600 ~ 10-Bolt ~ 4:10's

#47 Zooguy –
1/4 et - PA 11.902 ~ 1/4mph 113.73 ~ 1/8 et 7.627 ~ 1/8 mph 92.19 ~ 60ft 1.6861994 Formula~Stock LT1~ 4L60e~2.73’s~150 shot

#48 1SLOLT1-
1/4 et - NA - 12.08 ~ 1/4 mph - 111.81 ~ 1/8 et - 7.667 ~ 1/8 mph - 88.75 ~ 60ft - 1.631
95 Z28 ~ A4 ~ SS4000 ~ 10 bolt ~ 3.42

#49 BigT94Z-
1/4 et - NA - 12.25 ~ 1/4 mph - 110.22 ~ 1/8 et - ??? ~ 1/8 mph - ??? ~ 60ft - ???
96 Formula ~ Stock 10-bolt ~ 3.23?

#50 Badazz96z28-
1/4 et - NA -12.386 ~ 1/4 mph - 112.97 ~ 1/8 et - 8.002 ~ 1/8 mph - 89.29 ~ 60ft - 1.899
96 Camaro Z28 ~ T56 ~ 10-Bolt ~ 3.73's

#51 84MONTESS-
1/4 et - NA -12.88 ~ 1/4 mph - 104.92 ~ 1/8 et - 8.25 ~ 1/8 mph - 85.13 ~ 60ft - 1.886
93 Formula ~ Stock 139K mile lt1 w/ lLT's ~3.73's ~ Drag Radials.

#52 BlackWidowSS-
1/4 et - NA -12.99 ~ 1/4 mph - 110.60 ~ 1/8 et - 8.51 ~ 1/8 mph - 86.67 ~ 60ft - 2.11
97 SS Camaro ~ T56 ~ Competition 2+ Clutch ~ 10-Bolt ~ 3.42's ~ 5,427 D/A

#53 Z28Rob18-
1/4 et - NA - 13.1X ~ 1/4 mph - 106.XX ~ 1/8 et - ??? ~ 1/8 mph - ??? ~ 60ft - 2.26
95 Z28 ~ M6 - Stock clutch ~ Stock 10-bolt ~ 3.42

#54 JCZNova
1/4 et - NA - 13.28 ~ 1/4 mph - 99.05 ~ 1/8 et - 8.34 ~ 1/8 mph - 80.14 ~ 60ft - 1.76
'70 Chevy Nova ~ 4L60E - Yank 4000 ~ Ford 8.8 ~ 3.73

#55 Firefighter Z-
1/4 et - NA 13.33 ~ 1/4 mph - 101 ~ 1/8 et - 8.45 ~ 1/8 mph - 83.43 ~ 60ft - 1.78
Car 1994 Camaro Z28 ~ CC503 cam 355 NA ~ A4 ~ 3:23 ~ 10 bolt ~ 3600 stall ~ 12x19 Street Tire @ 25psi ~ Own tune

#56 Sahara54
1/4 et - NA - 13.59 ~ 1/4 mph - 97.93 ~ 1/8 et - 8.55 ~ 1/8mph - 77.76 ~ 60ft - 1.82
94 Formula ~ CC503 355 ~ 4L60 - 3200 Vigilante ~ 10 bolt ~ 2.73 gears

#57 DanDalessandro
1/4 et - NA - 14.86 ~ 1/4 mph - 95.80 ~ 1/8 et - 9.686 ~ 1/8 mph - 75.41 ~ 60 ft - 2.37
97 Z28 ~ 5.7 ~ T56 ~ 10 bolt ~ 3.42 gears

1FASTSS

06-19-2009, 02:41 PM

OK, the list is started (9 people) and some still need to update their missing information...

joelster

06-19-2009, 03:19 PM

Where's Tony S.?

1FASTSS

06-19-2009, 03:53 PM

Where's Tony S.?

I'll put him in once he posts up. I do not have the time to gather everyones information off other sites and post them here...Plus not sure why I only show this as the 4th post now...What the hell happened?

Everyone on the current list please add your info as needed. I was going to pm everyone asking for the info so I could add but looks like something happened and your posts were deleted.:doh:

jakesz28

06-19-2009, 04:28 PM

1/4 et 9.12 ~ 1/4mph 149 ~ 1/8 et - 5.866 ~ 1/8 mph 120.91 ~ 60ft - 1.399

94 Camaro Z28 ~ glide ~ ptc converter ~ fabbed 9" ~ 3.89

Heres the rest of the info( I think )

Transamman25

06-19-2009, 06:19 PM

96 Trans Am ~T56~Spec stage 3+~ welded tubes and braced 10 bolt 4.56 motive gears.

1FASTSS

06-20-2009, 08:07 AM

Updated

z28rob18

06-20-2009, 08:16 AM

well if you'll change it wen i run better times ill post.
*1/4 et-13.1 *1/4 mph 106 *1/8 et ???? *1/8 mph ??? *60' 2.26
*95 z28 *t56 *stock clutch *stock 10 bolt *3.42

thats my info/best so far workin on drastic changes

joelster

06-20-2009, 08:59 AM

joelster

60'.......1.601
1/8th.....7.440
mph.......91.77
1/4........11.723
mph.......114.44

'94 Z28---TH350---5200stall--Dana60---3.73---stcok shortblock N/A

The Engineer

06-20-2009, 09:23 AM

The Engineer, N/A

60........1.49
1/8.......6.98
MPH....97.47
1/4.....10.97
MPH...126.90

BLOWNDFIZ

06-20-2009, 10:04 AM

If it ever stops raining on Tuesday's here and I can get a decent launch I hope to be up on the list.... My ET will probably suck, but my trap should be good.

mpe331lx

06-20-2009, 10:37 AM

It would be a good idea to add engine size and what power adder (if any) to the specs

Transamman25

06-20-2009, 10:50 AM

mine was a 383 ci with 300 shot fron Nitro Dave

AChotrod

06-20-2009, 11:45 AM

just to update, my 1/8 was a 7.7 @ 94mph and I was on the stock clutch

Formula383

06-20-2009, 03:35 PM

10.93 @ 129.98

http://i359.photobucket.com/albums/oo38/tx20d/Project%20Formula383/1093130.gif

OVA1

06-21-2009, 02:32 PM

Mike O'Conner 1/8th: 1.66 60' 7.64 @ 90.49mph
96 Z- LT-1 350 Comp 466 cam, Vig 3400, 410s...

Badhawk

06-21-2009, 05:13 PM

Ok here is my missing info 4.10 gears.

1FASTSS

06-22-2009, 10:21 AM

It would be a good idea to add engine size and what power adder (if any) to the specs

Thats not a bad idea if we can get everyone to post it up before the list gets too long...

If it ever stops raining on Tuesday's here and I can get a decent launch I hope to be up on the list.... My ET will probably suck, but my trap should be good.

Yeah Brandon, get that thing out on the track and post up some times...

Anyone one else's information is updated. :cool:

Tony Shepherd

06-22-2009, 04:11 PM

Tony Shepherd 9.43 @ 143.08 , 93 Z28 , 396 LT1, AFR 227, 3450lbs,
Nitrous Outlet fogger

roadtrip120

06-22-2009, 05:10 PM

roadtrip120 -
1/4 et 11.07 ~ 1/4mph 128 ~ 1/8 et - 7.01 ~ 1/8 mph 100 ~ 60ft - 1.69

94 Camaro Z28 ~ 385 ,Dart CNC LT1 pro 1, T56 Faceplated, Solid Roller, Single Plane, Jessel Belt Drive, XFI

casper383

06-22-2009, 07:53 PM

Goebel 4000 stall, 3.73 gears:)

1FASTSS

06-23-2009, 08:20 AM

Updated

Tony Shepherd

06-23-2009, 04:07 PM

here is the rest of my info.
6.0 @ 116 1/8TH

TH400 ~ Goebel 4000 stall ~ 9" ~ 4:10

Speed Inc.

06-23-2009, 04:29 PM

#5 Speed Inc (Larry) -
1/4 et - 10.62 ~ 1/4mph - 126 ~ 1/8 et - 6.73 ~ 1/8 mph - 100 ~ 60ft - 1.40

396, SI H/I, LE H/R, FLT4 w/SS4000, S60 w/ spool & 3.73

Tony Shepherd

06-24-2009, 03:12 PM

1.39 60ft

Speed Inc.

06-24-2009, 03:49 PM

thanks for the update

1FASTSS

06-24-2009, 04:12 PM

thanks for the update

No problem..with the new found power from the tune I'm surprised their isn't a new best yet;) I'm sure come fall we'll see it drop more.

8SEC6SPD

06-24-2009, 10:44 PM

9.08 @ 155 mph. 1.42 60' m6, 3600#, n2o,
5.89 @ 121 mph 1/8th

1FASTSS

06-25-2009, 12:12 PM

Taner I got you info up there now. I still need car info clutch/rear end/gear....

And a beer delivery soon...

8SEC6SPD

06-25-2009, 07:36 PM

mcleod, moser, 4.11

1SLOLT1

06-26-2009, 12:09 PM

1995 Camaro Z28 A4 cc503, full-bolt ons, 3.42s, TCI3200

1/4: 12.23 @ 111 1/8: 7.78 @ 88 60ft: 1.69

OVA1

06-26-2009, 03:49 PM

Sorry about that, didn't see the dif' info request...

10-bolt- w/Eaton D.Locker.

Chopstix

06-28-2009, 05:19 PM

This is from the LTX Shootout

#x - Ray@Nitrodaves.com
1/4 et - 10.05 ~ 1/4 mph - 139.72 ~ 1/8 et - 6.522 ~ 1/8 mph - 109.83 ~ 60ft - 1.50
94 Formula ~ 700r4 ~ Goebel 3800 stall ~ 12 Bolt ~ 3.73 ~ 3210# ~ 200 shot

Set new bests for 60' and 1/8 mile this weekend
Best 60' is 1.42 wasted run by shifting 1 to 3
Best 1/8 mile is 6.41 @ 111.04 did not get 1/4 mile numbers

These were the only nitrous runs I got to make.

jakesz28

06-28-2009, 10:05 PM

I set a new record today and need an update.

JakesZ28 -
1/4 et 8.957 ~ 1/4mph 151.6 ~ 1/8 et - 5.742 ~ 1/8 mph 122.46 ~ 60ft - 1.349

94 Camaro Z28 ~ glide ~ ptc converter ~ fabbed 9" ~ 3.89

http://i97.photobucket.com/albums/l211/jakesz28/62809.jpg

Z8's

06-28-2009, 10:11 PM

Congrats!!!!! Larry text me after your first pass we figured you would get the 8 today.Good job!

Chopstix

06-28-2009, 10:42 PM

AWESOME....didn't think it would be long before one of you guys did it.

BIGT94z

06-29-2009, 12:26 AM

i didnt know i was even on the list! thats awesome!!

BIGT94z- 1/4- 12.251 ~ 1/4 mph- 110.22 ~ 1/8- 7.788 ~ MPH- *need to look at slip~ 60FT- 1.687
96 firebird ~ T56 - 4:11's ~9in

1FASTSS

06-29-2009, 12:26 PM

OVA1

06-30-2009, 09:48 AM

#XX OVA1-
1/4 et - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - 7.52 ~ 1/8 mph - 91.89 ~ 60ft -1.68

96 Z28 ~ Performabuilt Lvl-2 4L60E ~ Yank SS3600 ~ 10 Bolt Eaton D.Locker ~ 4.10s
__________________

http://i720.photobucket.com/albums/ww210/OVA_1/6-28-2009NewBestfortheZ.jpg

slow lt1

06-30-2009, 04:10 PM

#XX slow lt1-
1/4 et - 9.94~ 1/4 mph - 137.27 ~ 1/8 et - 6.36 ~ 1/8 mph - 110.25 ~ 60ft - 1.47

1995 Z28~th350 ~BTE-4200 ~10-bolt~3.73

1FASTSS

06-30-2009, 10:29 PM

1FASTSS

07-02-2009, 01:37 PM

#XX slow lt1-
1/4 et - 9.94~ 1/4 mph - 137.27 ~ 1/8 et - 6.36 ~ 1/8 mph - 110.25 ~ 60ft - 1.47

1995 Z28~th350 ~BTE-4200 ~10-bolt~3.73

Thanks for editing your info. Added you to the list as 4A since your times are the same. I will do that from now on with everyone else.

CARLOS

07-02-2009, 06:27 PM

Carlos Saberbein aka "SnakeKilla"
9.70 @ 136.97mph , 1/8 6.22 @ 110.57mph 1.37 60ft 4:10 gears 250 shot dual nozzle

Speed Inc.

07-03-2009, 08:08 AM

Chris..can you try to note the adder? cars i see must be spraying, but it's not listed.

makes us NA guys look better :)

z28rob18

07-03-2009, 08:14 AM

im the slowest person on the list at the time:cry:

1FASTSS

07-06-2009, 03:59 PM

Chris..can you try to note the adder? cars i see must be spraying, but it's not listed.

makes us NA guys look better :)

Yeah, will do. This is still a work in process.

I'll try and get everything updated by tomorrow.

1FASTSS

07-09-2009, 11:05 AM

Chris..can you try to note the adder? cars i see must be spraying, but it's not listed.

makes us NA guys look better :)

Per Larry's suggestion I have added PA (for power adder) and NA ( for nat. asp.) after the 1/4 et -

I went through and updated everyone as best I could but if its incorrect please let me know and I will change it...

Here is the new description for people wanting to add yourself to the list.

#XX Screen Name-
1/4 et - PA or NA - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - X.XX

Car (example 95 Z28) ~ Transmission ~ Converter or Clutch ~ Rear end ~ Gears

BLOWNDFIZ

07-09-2009, 12:36 PM

Well I guess I'll add myself to the list. It's too bad I missed 4th gear on this pass otherwise the MPH and ET would have been considerably better.

#XX Blowndfiz-
1/4 et - PA - 11.75 ~ 1/4 mph - 118.76 ~ 1/8 et - 7.50 ~ 1/8 mph - 96.68 ~ 60ft - 1.77

Car (94 Z28) ~ T56 ~ McLeod Street Twin ~ Moser 12 Bolt ~ 3.73

slow lt1

07-11-2009, 07:10 AM

UPDATE
# slow lt1-
1/4 et - PA - 9.88~ 1/4 mph - 136.87 ~ 1/8 et - 6.33 ~ 1/8 mph - 110.09 ~ 60ft - 1.43

1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

OVA1

07-11-2009, 11:08 AM

#(14)XX OVA1-
1/4 et - PA(Nano-50 shot) - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - 7.36~ 1/8 mph - 91.95 ~ 60ft - 1.58
96 Z28 ~ Perfomarbuilt LVL 2 A4 ~ SS3600 ~ D.Locker 10-Bolt ~ 4.10

http://i720.photobucket.com/albums/ww210/OVA_1/ZTimeslips7367-11-2009-1.jpg

1FASTSS

07-16-2009, 04:28 PM

Updated/added everyone.

I'm sure the cooler temps in the upcoming months people will have more updates!

slow lt1

07-20-2009, 11:33 AM

#5 slow lt1-
1/4 et - PA - 9.78~ 1/4 mph - 138.10 ~ 1/8 et - 6.23 ~ 1/8 mph - 110.23 ~ 60ft - 1.39

1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

Ponyhntr

07-20-2009, 12:44 PM

Here you go:

:)

#10 Ponyhntr -
1/4 et - PA 10.570 ~ 1/4mph 135.01 ~ 1/8 et - 0.000 ~ 1/8 mph 000.00 ~ 60ft - 1.57

96 Camaro Z28 ~ M6 ~ ProCharger F1A ~ pump gas ~ Moser 12 bolt ~ 4.11

96LT1355Z28

07-22-2009, 05:46 PM

Throw me in there somewhere!

96LT1355Z28
1/4 et - N/A 11.71 ~ 1/4mph 118.2 ~ 1/8 et - 7.49 ~ 1/8 mph 93.4 ~ 60ft - 1.66

96 Z28 ~ M6 ~ H/C ~ 9" ~ 4.10's ~ 3462lbs

Chopstix

07-26-2009, 01:41 PM

Update

#x - Ray@Nitrodaves.com (Ray@Nitrodaves.com)
1/4 et - PA - 9.91 ~ 1/4 mph - 136.79 ~ 1/8 et - 6.368 ~ 1/8 mph - 109.89 ~ 60ft - 1.453

Twisted Z

07-27-2009, 12:12 PM

I had a good weekend!

R/T....020
60'....1.437
330'...4.103
1/8....6.339
MPH...109.98
1000...8.272
1/4.....9.904
MPH....137.88

SSEFI 380Ci, 3L80, 4,400 stall .088 jet N2O, 3420Lbs.....Street Legal!

Shaking the tires hard! Shreaded the beads!

Ponyhntr

07-27-2009, 12:32 PM

blackbird1084

07-27-2009, 12:42 PM

Here's mine I'm probably close to the bottom.

#x-Blackbird1084
1/4 et-n/a-11.94~1/4 mph-112.26~1/8 et-7.559~1/8 mph-89.52~60ft 1.603
97 Trans Am WS6~A4~dayco 4200~zexel posi 10 bolt~3.73's

Tony Shepherd

07-27-2009, 08:14 PM

Ill throw my new best in there. 9.28 @ 144.21

#3 Tony Shepherd
1/4 et - PA 9.28 ~ 1/4mph 144.21 ~ 1/8 et - 5.92 ~ 1/8 mph 117.03 ~ 60ft - 1.33

93 Z28 ~ TH400 ~ Goebel 4000 stall ~ 9" ~ 4.10

jakesz28

07-27-2009, 08:41 PM

Theres quicker and quicker times being posted all the time this year. Lets keep this up and good job guys.

I was even challenged to a heads up race with another LTx in a fox body. That is another car that might make the list one day.

OutlawZ

07-31-2009, 01:54 AM

# Jason Brisson (OUTLAWZ)
1/4 et - PA 9.54~ 1/4mph 130.06 ~ 1/8 et - 6.055~ 1/8 mph 116.24 ~ 60ft - 1.38 (800' shutdown on this pass)

95Z28 ~ TH400 ~ ATI 4400 stall ~ 9" ~ 3.89

I'm coming for that record tommorrow Jakes... :D:D:D:D :devil:

Pauly Walnuts

08-03-2009, 12:59 PM

1/4 et - FL- 10.42 ~ 1/4 mph - 128.7 ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - 1.42

Video is in my sig.

1FASTSS

08-04-2009, 11:31 PM

Updated...Mike congrats on the 8's. We knew you'd get there at the
shotout...Awesome job.

Note to others:

Please copy and paste this to list the information for you car. It will make it much easier to update the list if I do not have to keep going back and forth to get the info.

Thanks.

#XX Screen Name-
1/4 et - PA or NA XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - X.XX

Car (example 95 Z28) ~ Transmission ~ Converter or Clutch ~ Rear end ~ Gears

I had a good weekend!

R/T....020
60'....1.437
330'...4.103
1/8....6.339
MPH...109.98
1000...8.272
1/4.....9.904
MPH....137.88

SSEFI 380Ci, 3L80, 4,400 stall .088 jet N2O, 3420Lbs.....Street Legal!

Shaking the tires hard! Shreaded the beads!

Here's mine I'm probably close to the bottom.

#x-Blackbird1084
1/4 et-n/a-11.94~1/4 mph-112.26~1/8 et-7.559~1/8 mph-89.52~60ft 1.603
97 Trans Am WS6~A4~dayco 4200~zexel posi 10 bolt~3.73's

1/4 et - FL- 10.42 ~ 1/4 mph - 128.7 ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - 1.42

Video is in my sig.

Hey guys, can you update your info as I posted before.

Thanks

Everyone else is updated on the list.:metal:

OutlawZ

08-06-2009, 02:39 AM

Twisted Z

08-07-2009, 03:03 PM

Twisted Z
1/4 et - PA or NA 9.904 ~ 1/4 mph - 137.88 ~ 1/8 et - 6.339 ~ 1/8 mph - 109.98 ~ 60ft - 1.437

SSEFI 380Ci LT1, SSEFI 3L80, A-1 4,400 stall , Nitro Dave's MM .088 jet N2O, 3.73 12 bolt, 3420Lbs.....Street Legal!

1SLOLT1

08-10-2009, 08:18 AM

buzz12586

1/4 et: 12.080 1/4 mph: 111.81 1/8 et: 7.667 1/8 mph: 88.75 60ft: 1.631

355 LT1, cc503, Full bolt-ons, SS4000, 3.42s, 3500lbs, 2400DA

fuel

08-12-2009, 08:57 PM

FUEL my new pb is 1.512 6.490 @107.69,10.151 @134.04

1FASTSS

08-13-2009, 04:30 PM

Sorry guys, I will try and get everyone updated as soon as possible. We just had our first addition to the family bless us just 2 short weeks ago and I just started back to work after being gone for 2+ weeks so my time is very limited right now.

Also, as I posted before please post your info so I can just copy and paste your info into the list. This saves me a ton of time getting info into the list. I will not put you on the list until the information is posted in the list format..sorry

Thanks and keep knocking them time down...fall is coming!

#XX Screen Name-
1/4 et - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - X.XX

Car (example 95 Z28) ~ Transmission ~ Converter or Clutch ~ Rear end ~ Gears

1FASTSS

08-13-2009, 04:41 PM

Sorry fast another update. I ran again last night and went a good bit faster....

#4 Jason Brisson (OutlawZ)
1/4 et - PA 9.39~ 1/4mph 143.2 ~ 1/8 et - 5.954~ 1/8 mph 115.5 ~ 60ft - 1.33

95Z28 ~ TH400 ~ ATI 4400 stall ~ 9" ~ 3.89

Videos are in the dragracing section as well...

No problem..got your new times updated. :metal:

Twisted Z
1/4 et - PA or NA 9.904 ~ 1/4 mph - 137.88 ~ 1/8 et - 6.339 ~ 1/8 mph - 109.98 ~ 60ft - 1.437

SSEFI 380Ci LT1, SSEFI 3L80, A-1 4,400 stall , Nitro Dave's MM .088 jet N2O, 3.73 12 bolt, 3420Lbs.....Street Legal!

Added:metal:

buzz12586

1/4 et: 12.080 1/4 mph: 111.81 1/8 et: 7.667 1/8 mph: 88.75 60ft: 1.631

355 LT1, cc503, Full bolt-ons, SS4000, 3.42s, 3500lbs, 2400DA

Is this an update for your car? or someone else?

FUEL my new pb is 1.512 6.490 @107.69,10.151 @134.04

Fuel...per my pm once you update your information in the list format I will add you to the list.

Thanks everyone.:D

Pauly Walnuts

08-13-2009, 05:01 PM

Info requested:

396 LT2.5 (Lt1 block, Lt4 heads and intake) , 125 shot, Vig 3200, 3.73's, 3600lbs.

1SLOLT1

08-13-2009, 08:17 PM

Is this an update for your car? or someone else?

Its for my car. I put the wrong screen name in there.

Twisted Z

08-16-2009, 04:32 PM

Here is my weekend update! My BEST 60ft was a 1.38! It would have went a low .7x if it had not spun on one of the other passes!

Twisted Z
1/4 et - PA - 9.827 ~ 1/4 mph - 137.37 ~ 1/8 et - 6.266 ~ 1/8 mph - 110.51 ~ 60ft - 1.414

SSEFI 380Ci LT1, SSEFI 3L80, A-1 4,4000 stall , Nitro Dave's MM .088 jet N2O, 3.73 12 bolt, 3420Lbs.....Street Legal!

http://i301.photobucket.com/albums/nn78/SSEFI/PINKS2A.jpg
http://i301.photobucket.com/albums/nn78/SSEFI/PINKSTIMESLIPA.jpg

OutlawZ

08-16-2009, 07:05 PM

sorry i didn't make it up there with my car Ellis...

I fractured my ankle a week ago and I can barely walk much less drive.... i was registered to be in the show...

My boys went though and one made the quick 8. Procharged sky blue early 60's nova.... Probably running high 7's.... and my engine builder was also up there with a flat black 66 nova running low 9's...

Twisted Z

08-16-2009, 09:54 PM

Sorry you are hurt man it would have been great to have you here!

They were saying the Nova had a failure on the line and defaulted. I was Rutting for him against Macey ;)

All my passes were 9.82 to 9.95 except the first one where I forgot to arm the system :(

We should try and hook up at the Oregon "Arm Drop race" next time ;)

OutlawZ

08-17-2009, 12:34 AM

good times..... that thing is coming along nicely..... yeah i wish i woulda been able to go....

I was looking forward to hanging out with the alston and csm crew and BBQ'n and racing.... oh well.... heard they picked ANOTHER 10 second field....

it's too bad cause i don't think PAO will ever do another 9 second field... unfortunately really fast cars will continue to be a sideshow and never the main event.... And you have to run in the 8's at least to make the quick 8.... good job out there though....

hell the PAO I attended they had to cancel the wheelstand comp which I would have won hands down... :D

1FASTSS

08-17-2009, 11:47 AM

1FASTSS

08-17-2009, 11:56 AM

Its for my car. I put the wrong screen name in there.

You were on the list already so I just updated your information.

OutlawZ

08-24-2009, 01:08 AM

Update......

Jason Brisson OUTLAWZ

9.20@151.1 mph, 1.36 60'

i don't have my timeslip scanned but the video is in the drag racing section......

Twisted Z

09-02-2009, 10:13 PM

Update......

Jason Brisson OUTLAWZ

9.20@151.1 mph, 1.36 60'

i don't have my timeslip scanned but the video is in the drag racing section......

Hell yeah Bro! I am on the fence. Try to make one more race or wait till the heads are here and do base assembly and ship it to turbo tech for twins.

Not sure ;)

You are getting closer and closer to the 8s man! I know every pass I get more settled in the car and it is going faster...I am sure the same is happening for you :D

1FASTSS

09-03-2009, 08:51 AM

Update......

Jason Brisson OUTLAWZ

9.20@151.1 mph, 1.36 60'

i don't have my timeslip scanned but the video is in the drag racing section......

I updated you to #3 now...I waited a few days becuase I figured you would have bested that already...;)

OVA1

09-21-2009, 08:02 PM

#20 OVA1-
1/4 et - PA - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - 7.28 ~ 1/8 mph - 95.7 ~ 60ft - 1.68

96 Z28 ~ Performabuilt Lvl-2 4L60E ~ Yank SS3600 ~ 10 Bolt Eaton D.Locker ~ 4.10s

3rdgen92maro

09-26-2009, 10:28 PM

Badhawk

09-28-2009, 06:49 PM

skinnies

09-29-2009, 03:34 AM

Skinnies - 1/4 10.28@129.34, 1/8th 6.54@105.43, 1.47 60ft, 1983 Rx7, lt1 with heads/cam, th400, 4.11's, 100 shot, ~2400#

fuel

10-04-2009, 02:01 PM

http://http://i242.photobucket.com/albums/ff113/fuel383/TimeSlip002.jpg 383,210 afr comp port,efi vic.accufab 4150 t/body,th400,3800 stall,9" 370 gear.on a 250 shot

fuel

10-04-2009, 02:02 PM

http://http://i242.photobucket.com/albums/ff113/fuel383/TimeSlip002.jpg

CamaroRacing12

10-04-2009, 11:49 PM

now that is impressive!

BIGT94z

10-06-2009, 12:29 AM

i didnt know i was even on the list! thats awesome!!

BIGT94z- 1/4- 12.251 ~ 1/4 mph- 110.22 ~ 1/8- 7.788 ~ MPH- *need to look at slip~ 60FT- 1.687
96 firebird ~ T56 - 4:11's ~9in....

fuel

10-06-2009, 07:38 AM

1/4 et - 9.787 ~ 1/4 mph - 136.07 ~ 1/8 et - 6.201 ~ 1/8 mph - 110.40 ~ 60ft - 1.401

Speed Inc.

10-06-2009, 11:30 AM

can I get added for the gun?

1.36 60 ft
6.40 1/8
107 mph 1/8
10.09 ET
132.5 1/4 MPH

1FASTSS

10-06-2009, 11:59 AM

3rdgen92maro (Shawn Ferris)

60'....1.56
1/8....7.141
MPH...96.18
1/4....11.223
MPH...120.18

95 Formula
Th350, Yank 4k stall, LT's, TD's, SLP lid,EWP, QA1 R series coilovers(front), Comp Eng 3way rear shocks, Adj LCA, 125 NX kit 2860# RW

Please use the thread format. I will copy and paste your info to the list once you update it. Thanks

1/4 et - 9.787 ~ 1/4 mph - 136.07 ~ 1/8 et - 6.201 ~ 1/8 mph - 110.40 ~ 60ft - 1.401

Same here...once you get the car info on their I will copy and paste you to the list as well.

1FASTSS

10-06-2009, 12:05 PM

can I get added for the gun?

1.36 60 ft
6.40 1/8
107 mph 1/8
10.09 ET
132.5 1/4 MPH

Up to #10:peace2:

Speed Inc.

10-06-2009, 01:50 PM

thanks buddy

fuel

10-08-2009, 08:35 PM

#XX FUEL
1/4 et - 9.787 ~ 1/4 mph - 136.07 ~ 1/8 et - 6.201 ~ 1/8 mph - 110.40 ~ 60ft - 1.401

94 camaro~ th400 ~ 3800 j&w ~ moser 9 ~ 370

AChotrod

10-11-2009, 09:22 PM

Need an update
#24 AChotrod-
1/4 et - NA - 11.682 ~ 1/4 mph - 119.12 ~ 1/8 et - 7.5 ~ 1/8 mph -94.53 ~ 60ft - 1.68

1FASTSS

10-12-2009, 09:48 AM

Updated.

AChotrod

10-12-2009, 11:46 PM

Thanks!
Sorry forgot to add that its a street twin clutch now.

Ponyhntr

10-13-2009, 07:54 AM

Thanks!
Sorry forgot to add that its a street twin clutch now.

Was that on a DR too? ;):face_shocked:

BLOWNDFIZ

10-13-2009, 08:28 PM

I need mine updated please...

1/4 et - PA - 11.30 ~ 1/4 mph - 125.80 ~ 1/8 et - 7.35 ~ 1/8 mph - 97.15 ~ 60ft - 1.74

94 Z28 ~ T56 ~ McLeod Street Twin ~ Moser 12 Bolt ~ 3.73

8SEC6SPD

10-20-2009, 11:22 PM

1/4 et - PA 8.97 ~ 1/4mph 155.23 ~ 1/8 et - 5.80 ~ 1/8 mph 123.28 ~ 60ft - 1.349

96 Camaro SS ~ EFI ~ Liberty's M6 ~ Mcleod ~ Moser ~ 3.89

on motor.....

1/4 et - PA 10.49 ~ 1/4mph 133.54 ~ 1/8 et - 6.82 ~ 1/8 mph 106.69 ~ 60ft - 1.66

96 Camaro SS ~ EFI ~ Liberty's M6 ~ Mcleod ~ Moser ~ 3.89

Ponyhntr

10-21-2009, 07:55 AM

Congrats Tanner!

fuel

10-22-2009, 10:59 PM

# FUEL
1/4 et - 9.775 ~ 1/4 mph - 136.59 ~ 1/8 et - 6.193 ~ 1/8 mph - 110.22 ~ 60ft - 1.379 http://i242.photobucket.com/albums/ff113/fuel383/TimeSlip10-22-09.jpg .......my new time ......

1FASTSS

10-23-2009, 11:31 AM

List is up to date. Taner congrats on the 8's.

fuel

10-23-2009, 04:45 PM

thanks 1fastss.......

OutlawZ

11-02-2009, 10:52 PM

roadtrip120

11-15-2009, 12:54 PM

Update

10.299 at 133.86mph 1.50 -60ft ALL Motor
6.623 at 104.26mph

1550ft DA

#13 roadtrip120
1/4 et - NA - 10.299 ~ 1/4mph 133.8 ~ 1/8 et - 6.62 ~ 1/8 mph 104 ~ 60ft - 1.50

94 Camaro Z28 ~ 385 ,Dart CNC LT1 pro 1, T56 Faceplated, Solid Roller, Single Plane, Jessel Belt Drive, XFI

Chopstix

11-15-2009, 08:20 PM

Congrats on everyones new bests....hope to see ya' at the track again Brady, car was running well, and looking even better.

XtremeOracing

11-16-2009, 01:48 PM

1/4 et - NA - 00.000 ~ 1/4mph 000.0 ~ 1/8 et - 8.279 ~ 1/8 mph 86.7 ~ 60ft - 1.941

8SEC6SPD

11-16-2009, 11:26 PM

brady,

ya see....if you spent more time tweaking and less time polishing you would be even lower in the tens ;) congrats again buddy! it was cool listining to you burnout and launch on the way to your 10.44 pass, lol!!!

1SLOLT1

11-18-2009, 02:13 PM

#26 1SLOLT1-
1/4 et - NA - 12.08 ~ 1/4 mph - 111.81 ~ 1/8 et - 7.667 ~ 1/8 mph - 88.75 ~ 60ft - 1.631

95 Z28 ~ A4 ~ SS4000 ~ 10 bolt ~ 3.42

Just making a correction. The car has an SS4000 instead of the TCI3200.

roadtrip120

11-23-2009, 12:52 AM

Another Update

Fastest N/A LT1 6spd
#12 roadtrip120
1/4 et - NA - 10.075 ~ 1/4mph 135.6 ~ 1/8 et - 6.47 ~ 1/8 mph 108 ~ 60ft - 1.48

1FASTSS

11-24-2009, 05:16 PM

Update.... i went 9.06@153.8 on a 1.35 60 foot..... 5.79 in the 1/8th mile....

Pass right prior to this one I had to abort a 5.76 1/8th mile pass.... easily should have been sub 8.99.... DAMNIT!!!!! But we've got the tune to do it now and it's still conservative and safe. Better air and drop some weight and we're there... :D

OOOPS

#3 Jason Brisson (OutlawZ)
1/4 et - PA 9.06 ~ 1/4mph 153.8 ~ 1/8 et - 5.76 ~ 1/8 mph 122.1 ~ 60ft - 1.35

95Z28 ~ TH400 ~ ATI 4400 stall ~ 9" ~ 3.89

Got ya updated...nice little pick up there outlaw!

1/4 et - NA - 00.000 ~ 1/4mph 000.0 ~ 1/8 et - 8.279 ~ 1/8 mph 86.7 ~ 60ft - 1.941

I'll add you to the list one you update your car info.

#26 1SLOLT1-
1/4 et - NA - 12.08 ~ 1/4 mph - 111.81 ~ 1/8 et - 7.667 ~ 1/8 mph - 88.75 ~ 60ft - 1.631

95 Z28 ~ A4 ~ SS4000 ~ 10 bolt ~ 3.42

Just making a correction. The car has an SS4000 instead of the TCI3200.

Got it!

Another Update

Fastest N/A LT1 6spd
#12 roadtrip120
1/4 et - NA - 10.075 ~ 1/4mph 135.6 ~ 1/8 et - 6.47 ~ 1/8 mph 108 ~ 60ft - 1.48

Got it...that E85 shit must be some good stuff!

n2ocamaro

11-25-2009, 09:49 PM

Can I get added to the list?

1/4 et xx.xx 1/4 mph xxx.xx 1/8 et 6.76 1/8 mph 101.9 60' 1.48

95 Z - 383, ported LT1's, ported LT1 intake, hyd. roller, th400, 9in, drag radials, 100 shot

8SEC6SPD

11-26-2009, 11:01 PM

Another Update

Fastest N/A LT1 6spd
#12 roadtrip120
1/4 et - NA - 10.075 ~ 1/4mph 135.6 ~ 1/8 et - 6.47 ~ 1/8 mph 108 ~ 60ft - 1.48

Brady it should be Quickest / not Fastest.... you have me by 0.015 and I have you by 0.81 mph, lmao!!!! i can't wait till we run door to door at the LTX shootout!

project weight reduction underway :)

96lt1m6

11-27-2009, 07:46 AM

After that please hit the scales!

Badhawk

11-30-2009, 01:06 PM

Need an update.

#20 Badhawk-
1/4 et - NA - 10.92 ~ 1/4 mph - 121.44 ~ 1/8 et -6.903 1/8 mph - 98.30 ~ 60ft - 1.46

94 Firehawk ~ 4L60E - 4000 Circle D ~ Moser 12-bolt ~ 4.10

1FASTSS

12-01-2009, 10:07 PM

Need an update.

#20 Badhawk-
1/4 et - NA - 10.92 ~ 1/4 mph - 121.44 ~ 1/8 et -6.903 1/8 mph - 98.30 ~ 60ft - 1.46

94 Firehawk ~ 4L60E - 4000 Circle D ~ Moser 12-bolt ~ 4.10

Looks like you got that 10 sec slip Jeff...nice work. I'm guessing that the changes you make are working out pretty good:cool:

Badhawk

12-01-2009, 10:28 PM

Thanks Chris, well some of the changes worked but we were surprised that the car didn't mph better so we have a few things to look in to yet.

halfasshotrods

12-05-2009, 06:45 PM

halfasshotrods
1/4 et - PA-9.91~ 1/4 mph - 141.13~ 1/8 et - 6.326 ~ 1/8 mph - 109.32 ~ 60ft - 1.401
94 Z28 383 with f1 procharger - TH350 with brake ~ 4500 stall - 9"rear -389 gears -3700lbs

1FASTSS

12-31-2009, 01:25 PM

halfasshotrods
1/4 et - PA-9.91~ 1/4 mph - 141.13~ 1/8 et - 6.326 ~ 1/8 mph - 109.32 ~ 60ft - 1.401
94 Z28 383 with f1 procharger - TH350 with brake ~ 4500 stall - 9"rear -389 gears -3700lbs

Slacking some on my part...add you to the list.

Badhawk

12-31-2009, 04:37 PM

AChotrod

12-31-2009, 04:38 PM

I was thinking the same thing Jeff!!

halfasshotrods

01-02-2010, 05:31 PM

1712 yeah that was on the stock sway bar and bent the shit out of it. I'm mini tubing it and putting an anti-roll on it.

AChotrod

01-02-2010, 05:51 PM

lol The full size pic is smaller then the sig pic.

halfasshotrods

01-02-2010, 06:17 PM

lol The full size pic is smaller then the sig pic.

Try clicking on the picture and it should get bigger.

Badhawk

01-02-2010, 06:37 PM

1712 yeah that was on the stock sway bar and bent the shit out of it. I'm mini tubing it and putting an anti-roll on it.

That's sick that tire is about 10 inches off the quarter on the drivers side and I bet it's damn near rubbing on the other side. Cool pic thanks for posting.

AChotrod

01-02-2010, 10:15 PM

that worked!!! Looks like its about to go airborn! Wicked pic!

slow lt1

04-18-2010, 04:43 PM

slow lt1-
1/4 et - PA - 9.45 ~ 1/4 mph - 140.61 ~ 1/8 et - 5.97 ~ 1/8 mph - 113.64 ~ 60ft - 1.31

1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

93v8clone

05-24-2010, 08:09 PM

my new best is 11.31 at 119 . while doin this i blew 2nd gear out lolol

Tony Shepherd

08-15-2010, 03:42 PM

New update: Looks like there is two #2 's on the list.

#4 Tony Shepherd
1/4 et - PA 8.97 ~ 1/4mph 151.05 ~ 1/8 et -5.76~ 1/8 mph 121.99~ 60ft - 1.37

http://www.youtube.com/watch?v=NPMBdHf_3ss

Ponyhntr

08-15-2010, 09:13 PM

Nice pass Tony!!!

1FASTSS

08-16-2010, 02:19 PM

slow lt1-
1/4 et - PA - 9.45 ~ 1/4 mph - 140.61 ~ 1/8 et - 5.97 ~ 1/8 mph - 113.64 ~ 60ft - 1.31

1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

Nice times...sorry for the long delay in updates, its been a very busy spring/summer for me this year.

my new best is 11.31 at 119 . while doin this i blew 2nd gear out lolol

If you update your info into the foremat as listed in the first post I will enter your info on the list.

New update: Looks like there is two #2 's on the list.

#4 Tony Shepherd
1/4 et - PA 8.97 ~ 1/4mph 151.05 ~ 1/8 et -5.76~ 1/8 mph 121.99~ 60ft - 1.37

http://www.youtube.com/watch?v=NPMBdHf_3ss

Congrats Tony...I put you and Taner tied for 2nd place...you 2 can grude match it out at the shootout:laugh:

Chopstix

08-16-2010, 04:16 PM

Badhawk

08-16-2010, 07:51 PM

Nice runs Ray and Tony.

halfasshotrods

08-21-2010, 03:10 PM

1/4 et - PA -9.75 ~ 1/4 mph - 138~ 1/8 et - 6.25 ~ 1/8 mph - 112 ~ 60ft - 1.44
94 Z28 383 with f1 procharger - TH400 with brake ~ 4500 stall - 9"rear -370 gears -3700lbs

Speed Inc.

08-22-2010, 03:43 PM

1/4 et - PA - 9.85 ~ 1/4mph -138 ~ 1/8 et - 6.29 ~ 1/8 mph - 110~ 60ft - 1.41

200 shot
easy launch
shift points too high
full street trim
little fat

drove it to and from track and I do not feel it's too bad for 1st time out :)

Formula383

08-22-2010, 04:14 PM

Wow! Congrats Larry!

n2ocamaro

08-23-2010, 01:51 PM

Congrats Larry and halfasshotrods on the new PBs. You both need to change your sigs!

1FASTSS

08-23-2010, 02:26 PM

Update

#8 - Ray@Nitrodaves.com (Ray@Nitrodaves.com)
1/4 et - PA - 9.826 ~ 1/4 mph - 132.02 ~ 1/8 et - 6.303 ~ 1/8 mph - 111.83 ~ 60ft - 1.424

94 Formula ~ 700r4 ~ Goebel 3800 stall ~ 12 Bolt ~ 3.73 ~ 3220# ~ 200 shot

http://www.youtube.com/watch?v=sb-hLlQ9RCA

Updated!

1/4 et - PA -9.75 ~ 1/4 mph - 138~ 1/8 et - 6.25 ~ 1/8 mph - 112 ~ 60ft - 1.44
94 Z28 383 with f1 procharger - TH400 with brake ~ 4500 stall - 9"rear -370 gears -3700lbs

Updated

1/4 et - PA - 9.85 ~ 1/4mph -138 ~ 1/8 et - 6.29 ~ 1/8 mph - 110~ 60ft - 1.41

200 shot
easy launch
shift points too high
full street trim
little fat

drove it to and from track and I do not feel it's too bad for 1st time out :)

Nice Larry.

Speed Inc.

08-23-2010, 04:28 PM

sig change coming

thanks

Badhawk

08-23-2010, 05:40 PM

Nice job Larry, but I wonder what it would have gone on your normally stellar 60ft. :hmm:

Speed Inc.

08-23-2010, 07:30 PM

thanks Jeff

surely more left in it :D

quik95lt1

10-12-2010, 01:18 PM

Quik95lt1
1/4 et - 10.26 ~ 1/4 mph - 131.56 ~ 1/8 et - 6.51 ~ 1/8 mph - 104.4 ~ 60ft - 1.41

95 Z28 3470lbs ~ 4L60E 5k Vigilante ~ 385ci LT1 Ai HCI ~ Strange S60 ~ 4.56 Locker

Naturally Aspirated

2010 LTX Shootout MOD NA Champion

Tony Shepherd

11-14-2010, 10:02 PM

#1 Tony Shepherd
1/4 et - PA 8.68 ~ 1/4mph 153.51 ~ 1/8 et -5.52~ 1/8 mph 125.00~ 60ft - 1.28 93 Z28 ~ PG ~ Goebel 3200 stall ~ 9" ~ 4.10~ current LT1 N2O record holder

Badhawk

11-14-2010, 10:19 PM

Congrats again Tony, good to see you got it.

Tony Shepherd

11-18-2010, 12:53 PM

Congrats again Tony, good to see you got it.

Thanks man!

1FASTSS

11-18-2010, 03:18 PM

The list has been updated.;)

joelster

11-20-2010, 03:48 PM

I'm currently #28 but that was from a long time ago. Bump me up to #24 please!

11.11 @ 121.65 1/4
7.08 @ 97.30 1/8th
1.55 60 foot

and it's a 94 Z28 not a 95

I posted the slip in the racing section a month ago.

"NO SHOW"

11-21-2010, 12:10 PM

#XX "NO SHOW"-
1/4 et - 10.978 ~ 1/4 mph - 116.81 ~ 1/8 et - 7.007 ~ 1/8 mph - 97.69 ~ 60ft - 1.44

Car (92 RS Camaro) ~ Transmission T56 ~ Centerforce ~ 9" ~ 4.30's

http://i467.photobucket.com/albums/rr39/3rdgenvert/Slip3.jpg

green93ta

12-08-2010, 06:00 PM

#14 green93ta-
1/4 et - 10.18 ~ 1/4 mph - 129.57 ~ 1/8 et - 6.42 ~ 1/8 mph - 105.36 ~ 60ft - 1.31

93 trans am ~ th350 ~ boss hog 3200 ~ 9in ford ~ 3.89

BlackWidowSS

04-21-2011, 12:25 PM

#XX BlackWidowSS-
1/4 et - 12.99 ~ 1/4 mph - 110.60 ~ 1/8 et - 8.51 ~ 1/8 mph - 86.67 ~ 60ft - 2.11
Car (97 SS Camaro) ~ T56 ~ Competition 2+ Clutch ~ 10-Bolt ~ 3.42's

BlackWidowSS

04-21-2011, 12:27 PM

This was at Bandimere Speedway with a 5,427 D/A

biggriff

05-14-2011, 01:32 PM

http://ltxtech.com/forums/images/icons/icon1.png

#XX Biggriff
1/4 et -PA~ 11.84 ~ 1/4 mph - 112.57 ~ 1/8 et - 7.53 ~ 1/8 mph - 91.65 ~ 60ft - 1.69
Car (93 "Pretty Much Stock") ~ A4 ~ Vig 3600 ~ 10-Bolt ~ 4:10's

SexyTransAm

05-14-2011, 09:06 PM

#XX SexyTransAm
1/4 et - PA - 11.60 ~ 1/4 mph - 116.8 ~ 1/8 et - 7.40 ~ 1/8 mph - 92.9 ~ 60ft - 1.60

Car (95 trans am) ~ Performabuilt 4L60E~ 3200 RevMax ~ stock 10 ~ 3.42

slammed98gmc

07-09-2012, 04:45 PM

Slammed98gmc

1/4 et - 8.72 ~ 1/4 mph - 156
~ 1/8 et - 5.62 ~ 1/8 mph - 125 ~ 60ft - 1.32

1998 gmc Sonoma ~ hughes performance Poweglide ~ Hughes performance 5000 rpm stall~ 8.5 10 bolt ~ 3.42

blackbird1084

07-17-2012, 02:07 AM

So your running an lt1 in that truck? That's a fast truck!

joelster

07-17-2012, 06:03 AM

#28 Jolster
1/4 et - NA - 10.53 ~ 1/4 mph - 130.45 ~ 1/8 et - 6.78 ~ 1/8 mph - 104.28 ~ 60ft - 1.62

94 Z28 ~ TH350 - 414" - AFR227 ~ S60 ~ 3.73

This is a very old list, lol, just updated my times.

joelster

09-25-2012, 06:56 AM

Give me a new update please!

1/4 ET- NA- 10.15 ~ 1/4mph- 133.65 ~ 1/8 ET- 6.47 ~ 1/8mph- 106.78 ~ 60ft- 1.427

JCzNova

02-16-2013, 11:30 PM

#XX JCZNova
1/4 et - NA - 13.28 ~ 1/4 mph - 99.05 ~ 1/8 et - 8.34 ~ 1/8 mph - 80.14 ~ 60ft - 1.76

'70 Chevy Nova ~ 4L60E - Yank 4000 ~ Ford 8.8 ~ 3.73

abeane4

09-02-2013, 04:43 PM

I would post my times here but I feel THIS THREAD IS DEAD!!!

JCzNova

09-02-2013, 04:48 PM

I would post my times here but I feel THIS THREAD IS DEAD!!!

It is, that time of mine was from February...

abeane4

09-02-2013, 04:52 PM

Yeah I saw that

Sahara54

01-21-2014, 05:29 AM

Cleaning up thread.

ZOHAN

01-21-2014, 10:11 AM

Dang, I should be in at #30. ;)

Making you silky smooth...

GuillaumeC

01-21-2014, 10:12 AM

Can you add me to the list? :)

# 635
http://i121.photobucket.com/albums/o210/mtl9c1/IMG_4623.jpg

Sahara54

01-21-2014, 03:53 PM

Dang, I should be in at #30. ;)

Making you silky smooth...

Get me the info and I'll get you on the list.

ZOHAN

01-21-2014, 04:04 PM

Get me the info and I'll get you on the list.

26764

Making you silky smooth...

JCzNova

01-21-2014, 04:40 PM

Making you silky smooth...

Damn Justin, HOW DID YOU PUSH IT THAT FAST?!?!

Sent from my S4 Mini

ZOHAN

01-21-2014, 05:02 PM

Damn Justin, HOW DID YOU PUSH IT THAT FAST?!?!

Sent from my S4 Mini

Whatcha mean? I ran 11.61 at ltx in 2012, this is a week later at my home track with much better air and my 2step. That was about the worst reaction time of the night tho. Lol. And my clutch was still slipping too. Shoulda been dipping into the 10s. :(

Making you silky smooth...

Sahara54

01-21-2014, 05:09 PM

Cleaning up thread.

Sahara54

01-21-2014, 05:10 PM

Sorry for the double post. I'm unable to edit my previous list for some reason.

Jayz28

11-02-2014, 09:37 PM

1/4 et - PA - 10.36 ~ 1/4mph 134.5 ~ 1/8 et - 6.59 1/8mph 103.79 ~ 60ft 1.44

94 Camaro Z28 ~ 383 HCI, 4L60E, 10 Bolt 3:73

30522

TravisMcGill2000

11-02-2014, 09:41 PM

Great times congrats. How much spray?

Jayz28

11-02-2014, 09:50 PM

Great times congrats. How much spray?

100 shot. First time ever. Now I'm hooked!!!

shadowbandit

11-02-2014, 10:08 PM

What's motor size

TravisMcGill2000

11-03-2014, 12:28 AM

Its very addictive thats for sure. Our 1/8 mile times are almost identical. Im still 10 bolt also. 1.39 60ft is my best on it.

Jayz28

11-03-2014, 05:32 AM

What's motor size

383

jakesz28

11-08-2014, 01:20 PM

Is this list up to date?

dawdaw

11-08-2014, 02:27 PM

Sure don't look like it... lots oof guys on here need to re up date there times :)

jakesz28

11-08-2014, 03:13 PM

#1 Tony Shepherd
1/4 et - PA 8.68 ~ 1/4mph 153.51 ~ 1/8 et -5.52~ 1/8 mph 125.00~ 60ft - 1.28

93 Z28 ~ PG ~ Goebel 3200 stall ~ 9" ~ 4.10~ Current LT1 N2O recordholder

#2 Slammed98gmc
1/4 et - PA - 8.72 ~ 1/4 mph – 156 ~ 1/8 et - 5.62~ 1/8 mph - 125 ~ 60ft - 1.32

1998 GMC Sonoma ~ Hughes Performance PG ~ Hughes 5000 stall~ 8.5 10 bolt ~ 3.42

#3 JakesZ28
1/4 et - PA 8.957 ~ 1/4mph 151.6 ~ 1/8 et - 5.742 ~ 1/8mph 122.46 ~ 60ft - 1.349

94 Camaro Z28 ~ glide ~ ptc converter ~ fabbed 9" ~ 3.89

#4 9SEC6SPD
1/4 et - PA 8.97 ~ 1/4mph 155.23 ~ 1/8 et - 5.80 ~ 1/8mph 123.28 ~ 60ft - 1.349

96 Camaro SS ~ EFI ~ Liberty's M6 ~ Mcleod ~ Moser ~ 3.89

#5 Jason Brisson (OutlawZ)
1/4 et - PA 9.06 ~ 1/4mph 153.8 ~ 1/8 et - 5.76 ~ 1/8 mph122.1 ~ 60ft - 1.35

95Z28 ~ TH400 ~ ATI 4400 stall ~ 9" ~ 3.89

#6 slow lt1
1/4 et - PA - 9.45 ~ 1/4 mph - 140.61 ~ 1/8 et - 5.97 ~1/8 mph - 113.64 ~ 60ft - 1.31

1995 Z28 ~ th350 ~ BTE-4200 ~10-bolt ~ 3.73

#7 SnakeKilla
1/4 et - PA – 9.70 ~ 1/4 mph – 136.97 ~ 1/8 et – 6.22 ~ 1/8mph – 110.57 ~ 60ft – 1.37

9X Trans Am ~ TH-400 ~ Converter? ~ Rear end? ~ 4.10’s

#8 halfasshotrods
1/4 et - PA- 9.75~ 1/4 mph - 138~ 1/8 et - 6.25 ~ 1/8 mph - 112 ~ 60ft -1.44

94 Z28~383~F1 Procharger ~TH400 w/ brake~4500 stall - 9"~370 gears~3700lbs

#9 FUEL
1/4 et - 9.775 ~ 1/4 mph - 136.59 ~ 1/8 et - 6.193 ~1/8 mph - 110.22 ~ 60ft - 1.379

94 camaro~ th400 ~ 3800 j&w ~ moser 9 ~ 370

#10 - Ray@Nitrodaves.com
1/4 et - PA - 9.826 ~ 1/4 mph - 132.02 ~ 1/8 et - 6.303 ~1/8 mph - 111.83 ~ 60ft - 1.424

94 Formula ~ 700r4 ~ Goebel 3800 stall ~ 12 Bolt ~ 3.73 ~ 3220# ~ 200 shot

#11 Twisted Z
1/4 et - PA - 9.827 ~ 1/4 mph - 137.37 ~ 1/8 et - 6.266 ~1/8 mph - 110.51 ~ 60ft - 1.414

SSEFI 380 LT1~ SSEFI 3L80~ A-1 4~4000 stall ~Nitro Dave's MM .088 jet N2O,~3.7312 bolt~3420Lbs

#12 Speed Inc (Larry)
1/4 et - PA - 9.85 ~ 1/4mph - 138 ~ 1/8 et - 6.29 ~ 1/8mph - 110 ~ 60ft - 1.41

97 Z28 ~396, SI H/I, LE H/R, FLT7 w/SS3600, S60 w/ spool & 3.73

#13 Casper 383 -
1/4 et - PA - 9.94 ~ 1/4 mph - 137 ~ 1/8 et - ??? ~ 1/8mph - ??? ~ 60ft - 1.43

93 Camaro Z28 ~ TH350 ~ Goebel 4000 stall ~ 12-bolt ~ 3.73

#14 roadtrip120
1/4 et - NA - 10.075 ~ 1/4mph 135.6 ~ 1/8 et - 6.47 ~ 1/8mph 108 ~ 60ft - 1.48

94 Camaro Z28 ~ 385 ,Dart CNC LT1 pro 1, T56 Faceplated, Solid Roller, SinglePlane, Jessel Belt Drive, XFI

#15 Jolster-
1/4 ET- NA- 10.15 ~ 1/4mph- 133.65 ~ 1/8 ET- 6.47 ~1/8mph- 106.78 ~ 60ft- 1.427

94 Z28 ~ TH350 - 5200 stall ~ S60 ~ 3.73

#16 green93ta-
1/4 et - 10.18 ~ 1/4 mph - 129.57 ~ 1/8 et - 6.42 ~ 1/8mph - 105.36 ~ 60ft - 1.31

93 Trans Am ~ th350 ~ boss hog 3200 ~ 9in ford ~ 3.89

#17 Transammann 25 -
1/4 et - PA - 10.20 ~ 1/4mph - 138 ~ 1/8 et - ??? ~1/8 mph - ??? ~ 60ft - 1.88

96 Trans Am ~ T56 ~ Spec stage 3+ ~ welded tubes and braced 10 bolt 4.56 motivegears.

#18 Quik95lt1
1/4 et - 10.26 ~ 1/4 mph - 131.56 ~ 1/8 et - 6.51 ~ 1/8mph - 104.4 ~ 60ft - 1.41

95 Z28 3470lbs ~ 4L60E 5k Vigilante ~ 385ci LT1 Ai HCI ~ Strange S60 ~ 4.56Locker

#19 Chased-
1/4 et - PA - 10.4X ~ 1/4 mph - 131.XX ~ 1/8et - XX.XX ~ 1/8 mph - XX.XX ~ 60ft - 1.48

96 Trans Am ~ 4L60E ~ Yank SS 3800 ~ 12-bolt ~ 3.73

#20 Pauly Walnuts
1/4 et - FL- 10.42 ~ 1/4 mph - 128.7 ~ 1/8 et -XX.XX ~ 1/8 mph - XX.XX ~ 60ft - 1.42

396 LT2.5 (Lt1 block, Lt4 heads and intake) , 125 shot, Vig 3200, 3.73's,3600lbs.

#21 1FASTSS
1/4 et - PA - 10.47 ~ 1/4 mph - 129.12 ~ 1/8 et - ??? ~ 1/8mph - ??? ~ 60ft - 1.48

96 Z28/SS ~ 4L60E - 3800 Yank ~ S60 ~ 3.73

#22 Ponyhntr -
1/4 et - PA - 10.570 ~ 1/4mph 135.01 ~ 1/8 et - 0.000 ~ 1/8mph 000.00 ~ 60ft - 1.57

96 Camaro Z28 ~ M6 ~ ProCharger F1A ~ pump gas ~ Moser 12 bolt ~ 4.11

#23 n20camaro
1/4 et - PA - xx.xx 1/4 mph xxx.xx 1/8 et 6.76 1/8 mph101.9 60' 1.48

95 Z – 383~H/C/I~th400~9”~drag radials~100 shot

#24 Badhawk-
1/4 et - NA - 10.92 ~ 1/4 mph - 121.44 ~ 1/8 et -6.9031/8 mph - 98.30 ~ 60ft - 1.46

94 Firehawk ~ 4L60E - 4000 Circle D ~ Moser 12-bolt ~ 4.10

#25 Formula 383 (need update)
1/4 et - PA - 10.93 ~ 1/4 mph - 129.9 ~ 1/8 et - 7.15 ~1/8 mph -100.99 ~ 60ft - 1.78

97 Formula ~ M6 - S60 ~ 4.10

#26 Engineer-
1/4 et - NA - 10.97 ~ 1/4 mph - 126.9 ~ 1/8 et -6.98 ~ 1/8 mph 97.47 ~ 60ft - 1.49

97 Camaro Z28

#27 "NO SHOW"-
1/4 et - 10.978 ~ 1/4 mph - 116.81 ~ 1/8 et - 7.007 ~ 1/8mph - 97.69 ~ 60ft - 1.44

Car (92 RS Camaro) ~ Transmission T56 ~ Centerforce ~ 9" ~ 4.30's

#28 OVA1-
1/4 et - PA - XX.XX ~ 1/4 mph - XXX.XX ~ 1/8 et - 7.28 ~1/8 mph - 95.7 ~ 60ft - 1.68

96 Z28 ~ Performabuilt Lvl-2 4L60E ~ Yank SS3600 ~ 10 Bolt-Eaton Locker ~ 4.10s

#29 Blowndfiz-
1/4 et - PA - 11.30 ~ 1/4 mph - 125.80 ~ 1/8 et - 7.35 ~ 1/8mph - 97.15 ~ 60ft - 1.74

94 Z28 ~ T56 ~ McLeod Street Twin ~ Moser 12 Bolt ~ 3.73

#30 ZOHAN
1/4 et – 11.412 ~ 1/4 mph – 123.09 ~ 1/8 et – 7.358 ~ 1/8 mph – 95.44~ 60ft - 1.629

Formula ~ ???
#31 SexyTransAm
1/4 et - PA - 11.60 ~ 1/4 mph - 116.8 ~ 1/8 et - 7.40 ~ 1/8mph - 92.9 ~ 60ft - 1.60

95 Trans Am ~ Performabuilt 4L60E~ 3200 RevMax ~ stock 10 ~ 3.42

#32 AChotrod
1/4 et - NA - 11.682 ~ 1/4 mph - 119.12 ~ 1/8 et - 7.5 ~ 1/8mph -94.53 ~ 60ft - 1.68

96 Formula WS6 ~ M6 - McLeod Street Twin ~ S60 ~ 4.10

#33 96LT1355Z28
1/4 et - N/A 11.71 ~ 1/4mph 118.2 ~ 1/8 et - 7.49 ~ 1/8mph 93.4 ~ 60ft - 1.66

96 Z28 ~ M6 ~ H/C ~ 9" ~ 4.10's ~ 3462lbs

#34 Biggriff-
1/4 et -PA~ 11.84 ~ 1/4 mph - 112.57 ~ 1/8 et - 7.53 ~ 1/8mph - 91.65 ~ 60ft - 1.69

93 Z28~"Pretty Much Stock" ~ A4 ~ Vig 3600 ~ 10-Bolt ~ 4:10's

#35 1SLOLT1-
1/4 et - NA - 12.08 ~ 1/4 mph - 111.81 ~ 1/8 et - 7.667 ~ 1/8mph - 88.75 ~ 60ft - 1.631

95 Z28 ~ A4 ~ SS4000 ~ 10 bolt ~ 3.42

#36 BigT94Z-
1/4 et - NA - 12.25 ~ 1/4 mph - 110.22 ~ 1/8 et -??? ~ 1/8 mph - ??? ~ 60ft - ???

96 Formula ~ Stock 10-bolt ~ 3.23?

#37 BlackWidowSS-
1/4 et - NA -12.99 ~ 1/4 mph - 110.60 ~ 1/8 et -8.51 ~ 1/8 mph - 86.67 ~ 60ft - 2.11

97 SS Camaro ~ T56 ~ Competition 2+ Clutch ~ 10-Bolt ~ 3.42's ~ 5,427 D/A

#38 Z28Rob18-
1/4 et - NA - 13.1X ~ 1/4 mph - 106.XX ~ 1/8 et - ??? ~ 1/8mph - ??? ~ 60ft - 2.26

95 Z28 ~ M6 - Stock clutch ~ Stock 10-bolt ~ 3.42

#39 JCZNova
1/4 et - NA - 13.28 ~ 1/4 mph - 99.05 ~ 1/8 et - 8.34 ~ 1/8mph - 80.14 ~ 60ft - 1.76

'70 Chevy Nova ~ 4L60E - Yank 4000 ~ Ford 8.8 ~ 3.73

#40 Sahara54
1/4 et - NA - 13.59 ~ 1/4 mph - 97.93 ~ 1/8 et - 8.55 ~ 1/8mph - 77.76 ~ 60ft - 1.82

'94 Formula ~ 4L60E - Vigilante 3200 ~ 10-bolt ~ 2.73

Looks like last update was 1/21/2014

dawdaw

11-08-2014, 09:31 PM

Well add me to the list

383
Stock 643 gm casting le1 heads
Obd1 pcm opti equipped olsd tuned
Baby hydro roller
Stock unported lt1 intake
Th400 with n20 converter
3.89 gear and mickey 275 pros
E85
Naturally aspirated
Midwest chassis full suspension

Quaser blue ;)

Getting bugs worked out . Letting out 80 feet early short shifting and still tuning. . Hopefully spraying soon before snow flies. Hoping for low 6.60s high 6.50s na with it sorted out

dawdaw

11-09-2014, 07:36 AM

Sahara54

A bunch of people need Updated please :)

popo8

11-09-2014, 08:38 AM

Who do we have running this thread, and updating it when info is submitted?

Sahara54

11-09-2014, 08:49 AM

List updated on front page.

Sahara54

11-09-2014, 08:50 AM

Who do we have running this thread, and updating it when info is submitted?

I don't have access to the main thread so I just update when I get notified.
dawdaw - Done

popo8

11-09-2014, 08:52 AM

I don't have access to the main thread so I just update when I get notified.
meissen, can we give him MOD powers to control all of this thread? Is that something we can do.

meissen

11-09-2014, 09:34 AM

Sahara54 let me know if you can edit the first post now

Sahara54

11-09-2014, 09:41 AM

@Sahara54 (http://ltxtech.com/forums/member.php?u=4842) let me know if you can edit the first post now

Good to go..:claps:

popo8

11-09-2014, 09:47 AM

Thats why @meisswn is the MAGIC MAN. POOF...AND IT WAS DONE.

jakesz28

11-09-2014, 02:25 PM

Wow. Ask and you will receive.

Thanks guys.

96LT1355Z28

11-11-2014, 02:57 PM

Update:

#xx 96LT1355Z28
1/4 et - N/A 10.68 ~ 1/4mph 129.5 ~ 1/8 et - 6.87 ~ 1/8 mph 102.91 ~ 60ft - 1.57

96 Z28 ~ SR 385 ~ faceplated M6 ~ MWC 9" ~ 4.30's ~ 3380lbs w/driver
Sahara54

Sahara54

11-11-2014, 06:06 PM

Update:

#xx 96LT1355Z28
1/4 et - N/A 10.68 ~ 1/4mph 129.5 ~ 1/8 et - 6.87 ~ 1/8 mph 102.91 ~ 60ft - 1.57

96 Z28 ~ SR 385 ~ faceplated M6 ~ MWC 9" ~ 4.30's ~ 3380lbs w/driver

Done, #37 up to #28

dawdaw

11-11-2014, 06:37 PM

Nice Josh. .. need to get them sixties down more and she will boogie...

Just noticed kind of funny the #26 guy above me is the same car as mine. .. previous owner named darrel that I bought the car off when I was 18 .. combo is the exact same just changed converters and suspension and weight reduction and no spray and the same times as his 100 shot.

dawdaw

08-29-2015, 07:51 PM

I'll take an update please . Sahara54
10.58 at 125.7
1.41 sixty foot
Naturally aspirated.

I'm at spot 27.

95 Camaro Z28 ~ TH400 ~ stock lt1 heads/intake ~ hydraulic cam~ 383 ~ E85 ~ 3.89's ~ Mickey 275 Pro

Thank you

Tony Shepherd

09-09-2015, 09:31 PM

Update please

#1 Tony Shepherd
1/4 et - PA 8.45 ~ 1/4mph 161.57 ~ 1/8 et 5.43~ 1/8 mph 130.37~ 60ft - 1.29

GuillaumeC

09-09-2015, 09:44 PM

Good god...!!!! :D

popo8

09-10-2015, 12:52 AM

Congrats! Will try to update 2moro while at my computer.

Anyone else require updating? ??

LTXtech.com IS my drug...

dawdaw

09-10-2015, 08:58 AM

Ya I need to be bumped from #27 to #26 please

popo8

09-10-2015, 09:08 AM

Ya I need to be bumped from #27 to #26 please

I need your numbers so I can change them up.

shownomercy

09-10-2015, 09:08 AM

1/4 et - 10.20 ~ 1/4mph 139.89 ~ 1/8 et XXX~ 1/8 mph XXXX~ 60ft - 1.8
popo8

shownomercy

09-10-2015, 09:09 AM

1/4 et - 10.20 ~ 1/4mph 139.89 ~ 1/8 et XXX~ 1/8 mph XXXX~ 60ft - 1.8

popo8

popo8

09-10-2015, 09:24 AM

I have updated the list. Sahara54 , I was not sure if you still wanted to do it... hope you dont mind.

Also, I have colored owner's names in red to make it a bit easier to see.

Please review and make sure that I filled out your information correctly.

FINALLY, Please let me know what you think about keeping people on the list who are no longer forum active, or even running an LTX engine anymore. Should they stay in a spot, or be removed from the list. Another idea, is that I could color code them differently.

Please let me know your thoughts.

Thank You,

larry

shownomercy

09-10-2015, 09:39 AM

Won't be many fast cars on the list if you take off any inactive people.

dawdaw

09-10-2015, 09:40 AM

There in post 194 popo8

popo8

09-10-2015, 09:46 AM

Won't be many fast cars on the list if you take off any inactive people.

Well when I say inactive, I mean... GONE. Like AChotrod for example.

shownomercy

09-10-2015, 09:59 AM

Hell, almost the top 15 are no longer active... cept for Tony and Ray.

milehighz28

09-10-2015, 10:14 AM

#XX Milehighz28
1/4 et - PA 8.70 ~ 1/4 mph - 156.88 ~ 1/8 et - 5.58 ~ 1/8 mph - 126.76 ~ 60ft - 1.36

Add me up! :)

popo8

09-10-2015, 10:15 AM

Hell, almost the top 15 are no longer active... cept for Tony and Ray.

Do you think that #16 wouldnt be happier to be #3 and the rest who follow?

I guess if I had a time on there, I would want to sit in the numbered spot where I fall if EVERYONE were to show up on the same day to race. For example... the SONOMA is no longer even LTX powered. Should he still continue to hold his spot on the list.

Im just asking for input, by no means am I looking to alienate or kick anyone off the list.

popo8

09-10-2015, 10:19 AM

#XX Milehighz28
1/4 et - PA 8.70 ~ 1/4 mph - 156.88 ~ 1/8 et - 5.58 ~ 1/8 mph - 126.76 ~ 60ft - 1.36

Add me up! :)

DONE

Dan

09-10-2015, 10:22 AM

I say leave the inactive people on the list. Make the active people's name green and inactive red.

milehighz28

09-10-2015, 10:24 AM

Damn....I forgot the extra info:

93 Z28 76mm Turbo~ 355 ~ Powerglide ~ 12bolt ~ 3.42 ~ Extra info: I'm super sexy

milehighz28

09-10-2015, 10:44 AM

Hmm....3rd place. That seems familiar....

popo8

09-10-2015, 06:43 PM

As SOMEONE once told me... "Bronze is still a medal."

LTXtech.com IS my drug...

dawdaw

09-10-2015, 06:58 PM

Hmm....3rd place. That seems familiar....
milehighz28

Hey jeff I remember talking to you at the shootout . If I remember tight you Said that thing has gm lt1 heads and intake on it ?

Dan

09-10-2015, 07:22 PM

As SOMEONE once told me... "Bronze is still a medal."

LTXtech.com IS my drug...
Not it's: Orange is the new black!

Put me at the bottom of the list coach!
DanDalessandro
1/4 et - NA 14.86 ~ 1/4 mph 95.80 ~ 1/8 et 9.686 ~ 1/8 mph 75.41 ~ 60 ft 2.37

97 Z28 ~ 5.7 ~ T56 ~ Stock 10 bolt ;) ~ 3.42 gears ~ Extra info: It was my first time!

milehighz28

09-10-2015, 10:07 PM

@milehighz28 (http://ltxtech.com/forums/member.php?u=8244)

Hey jeff I remember talking to you at the shootout . If I remember tight you Said that thing has gm lt1 heads and intake on it ?

Yeah, ported stock castings anyhow.

Ryan Stout

09-10-2015, 10:19 PM

I'm #22 or so LOL.

60'-1.988
1/8-7.079
Mph-120.05
1/4-10.370
Mph-147.46

89 mustang, 383, gt88, powerglide, 8.8, 3.08s

Sahara54

09-11-2015, 12:28 PM

Ryan Stout DanDalessandro Got you both down.
shownomercy Need some specs
popo8 Sorry man, My phone stopped showing me notifications for emails and I was on vacation. I haven't touched my personal laptop since before OC. I do everything while I'm at work usually... Lol.
I'm down for trimming up the list for those who are still active or at least swapping colors of the active members.

popo8

09-11-2015, 01:00 PM

Please dont appologize man.

I do not mind helping out. But now that you are back... there are a few that I had not added yet.

@Ryan Stout (http://ltxtech.com/forums/member.php?u=994) @DanDalessandro (http://ltxtech.com/forums/member.php?u=7787) Got you both down.
@shownomercy (http://ltxtech.com/forums/member.php?u=4656) Need some specs
@popo8 (http://ltxtech.com/forums/member.php?u=1330) Sorry man, My phone stopped showing me notifications for emails and I was on vacation. I haven't touched my personal laptop since before OC. I do everything while I'm at work usually... Lol.
I'm down for trimming up the list for those who are still active or at least swapping colors of the active members.

Sahara54

09-11-2015, 02:08 PM

Please dont appologize man.

I do not mind helping out. But now that you are back... there are a few that I had not added yet.

Yep, Got everyone that posted after you got them.

Dan

09-11-2015, 02:13 PM

I can't believe I'm at the bottom... :(

Oh wait yes I can [emoji38]

shownomercy

09-11-2015, 08:15 PM

SNM - 1995 Z28 - PT76gts - 383ci - 24x - 4L80e - S60

blackbird1084

09-22-2015, 08:18 AM

Guess I need to get active on here again.

Sent from my iPhone using Tapatalk

popo8

09-22-2015, 08:20 AM

Yep, Got everyone that posted after you got them.
Sahara54 , let me know if you need me to help out updating.

Jayz28

09-22-2015, 08:38 AM

Sheew I can't wait to move up a few spots! Gonna spray 150 next trip!!!

It will prob be next month or November!

Jayz28

11-21-2015, 06:37 PM

1/4 et - PA - 10.13 ~ 1/4 mph - 135.267 ~ 1/8 et- 6.54 ~ 1/8 mph 108.495 ~ 60ft - 1.59

Stock 10 bolt! 150 shot progressive controller. HCI 383

https://vimeo.com/146515939

34627

Vicious95Z28

11-21-2015, 08:30 PM

10.13 @ 135mph

Stock 10 bolt! 150 shot progressive controller. HCI 383

https://vimeo.com/146515939
That's one good 10 bolt!

Sent from my SM-S975L using Tapatalk

Vicious95Z28

11-24-2015, 06:53 PM

Jayz28 do you have any video?

Sent from my SM-S975L using Tapatalk

Jayz28

11-24-2015, 09:00 PM

Jayz28 do you have any video?

Sent from my SM-S975L using Tapatalk

I have a couple.

Jayz28

11-24-2015, 09:01 PM

https://vimeo.com/146854827

Vicious95Z28

11-24-2015, 09:15 PM

Can't get it to open bro.

Sent from my SM-S975L using Tapatalk

Jayz28

11-24-2015, 09:32 PM

It's still processing. Did you see the vid I'm post 226?

Vicious95Z28

11-25-2015, 08:01 AM

No brother, all I see is a partial url.

Sent from my SM-S975L using Tapatalk

Jayz28

11-25-2015, 10:11 AM

No brother, all I see is a partial url.

Sent from my SM-S975L using Tapatalk

Dunno buddy. I posted 2 vids. And got a third ready. I will try posting a YouTube link.

Jayz28

11-25-2015, 10:12 AM

https://vimeo.com/146912677

Jayz28

11-25-2015, 10:14 AM

https://www.youtube.com/channel/UCKbP9cDvuck2lqnvuryFdSQ

Vicious95Z28

11-25-2015, 10:15 AM

Now you've got something buddy, I'm subscribe to your page.

Sent from my SM-S975L using Tapatalk

Jayz28

11-25-2015, 10:16 AM

Did it work?

Jayz28

11-25-2015, 10:17 AM

I will post some more on there. I never fool with it.

popo8

11-25-2015, 05:51 PM

Did it work?
Yes sir...

http://images.tapatalk-cdn.com/15/11/25/c667e01daea3c50beb161788b66a4ac8.jpg

http://images.tapatalk-cdn.com/15/11/25/c6aeb6b4e153916cc1f2dd10a435db3e.jpg

LTXtech.com IS my drug...
OWNER/ADMIN

Jayz28

11-25-2015, 07:00 PM

Cool beans! lol

zooguy

07-20-2016, 10:45 PM

Zooguy - 11.902 - 113.73 MPH - 7.627 - 92.19 MPH - 1.686 60'
1994 stock tune, stock cam, stock rockers, stock trans, stock verter, stock 10 bolt with stock 2.73 gears

165,000 miles on the car
lca
long tube headers
150 shot
28" slicks
3410 lbs with me out of the car

Mystery Bird

07-21-2016, 09:35 AM

Mystery Bird
1/4 et -NA 10.78 ~ 1/4 mph - 124~ 1/8 et - 6.83 ~ 1/8 mph - 99.17 ~ 60ft - 1.46

95 Firebird ~ 381 ~ 4L80E ~ 3.90 ~ Gears ~ Stock PCM and Opti

Ponyhntr

09-07-2016, 06:45 PM

Ponyhntr -
1/4 et - PA - 8.503 ~ 1/4mph 155.53 ~ 1/8 et - 5.527 ~ 1/8 mph 133.70 ~ 60ft - 1.398
96 Camaro Z28 ~ A3 ~ ProCharger F1A ~ Q16 ~ Moser M9 ~ 3.89

Sahara54

09-08-2016, 02:26 AM

zooguy Mystery Bird Ponyhntr Your all on the list. I figured there would be a ton of bests after the shootout.

Remember to tag me at the end of your post so I can get to it immediately.

TravisMcGill2000

09-08-2016, 08:12 AM

Travismcgill2000
1/4 et- 9.98 ~ 1/4 mph 135 ~ 1/8 et 6.34 ~ 1/8 mph 108 ~ 60ft 1.40 ~94 trans am~ ci 355~ 4l60~ 3400lb~ nitrous outlet plate

dawdaw

09-08-2016, 08:46 AM

Travismcgill2000
1/4 et- 9.98 ~ 1/4 mph 135 ~ 1/8 et 6.34 ~ 1/8 mph 108 ~ 60ft 1.40 ~94 trans am~ ci 355~ 4l60~ 3400lb~ nitrous outlet plate

How much spray travis?

TravisMcGill2000

09-08-2016, 12:02 PM

200

dawdaw

09-08-2016, 01:48 PM

Nice. That 355 is making some steam. Congrats

TravisMcGill2000

09-08-2016, 04:12 PM

Thanks. It's getting there. Hopefully go little faster with cooler weather.