bolt on lt1 dyno numbers

[BIGT94z]

going through a 9in with et streets (bias)

http://i373.photobucket.com/albums/oo174/BIGT94z/travis.jpg

[AChotrod]

Nice numbers!!!!

[proace4]

Very nice numbers congrats!

[YZF]

Turbo 911's dont want none, and neither did tha brotha that put the swerve on that semi down 71 :)

[jaysz2893]

Congrats! Nice numbers especially for a 9 inch! You Manual or Auto? I made 303.5rwhp and 341.5rwtq before my longtubes and "ram air" I am stock 3.23 10 bolt and 6speed (m29). I hope with a good tune i can hit atleast 320rwhp/350rwtq.

[YZF]

Congrats! Nice numbers especially for a 9 inch! You Manual or Auto? I made 303.5rwhp and 341.5rwtq before my longtubes and "ram air" I am stock 3.23 10 bolt and 6speed (m29). I hope with a good tune i can hit atleast 320rwhp/350rwtq.

Its got a man pedal in it! Thats the only way to go here in MO :metal:

[GRIM REAPER]

304/320 and 12.20s thats bad ass

[BIGT94z]

304/320 and 12.20s thats bad ass thanks u sir :cool:

[tomsws6]

damn 12.2's on 304hp? wow whats your 60ft 1.01? lol your a whole second and 3mph faster than me and i have 50 more hp! wow great times!

[Bad LT1]

can you list all the bolt ons please:whistle:

Brands/sizes...etc

[1SLOLT1!]

damn last time i Dynoed my car i put down 268 RWHP and 316 RWTQ with mods in sig.

Nice numbers and 1/4 times!

[YZF]

can you list all the bolt ons please:whistle:

Brands/sizes...etc

FOR BIGT's car:

-ASP Crank Pulley
-K&N CAI
-new gm opti w/ msd cap and rotor
-Trickflow intake elbow
-Meziere electric waterpump
-Airfoil
-160 degree Thermostat
-Hooker Long Tube Headers
-ARP header bolts
-Delta Flowmaster race mufflers
-MSD otvc spark plug wires/tr55 plugs
-!cats
-PCMforless Programming(tuned for 92octane)
-LT4 knock module
-Crane Gold 1.6RollerRockers
-Manely Valve Springs
-Titainium Retainers
-!AIR
-!EGR
-!power steering and ac
-madman alternator relocation kit
-TB Bypass
-hvac delete
-griffin stand up radiator/custom fans

[YZF]

damn last time i Dynoed my car i put down 268 RWHP and 316 RWTQ with mods in sig.

Nice numbers and 1/4 times!


Its tough to get good numbers through an auto so don't be ashamed of those numbers. I did 267hp completely stock but I'm running a 6 speed.

You made 15 more tq than my car did stock though.

[bricez28]

idhope id be somewhere around300 to the wheels.

[BIGT94z]

Thanks for posting that up shane. A week later I found that number 7 wire was literally hanging on by a thread and was burnt. So the car might make a tad more through the 9in which is crazy! Sadly I won't throw it on a dyno until next march hehe

[MeanGreen94Z]

with stock longblock, 10308 springs, stock TB, and 1.6 rockers my car made 306/334 through a T56. and that was through a 9" and heavy ass Mcleod clutch (ask shane). i had every bolton you could get with a ignition box and 152k miles on the car when it was dynod on a mustang dyno :) car ran high 7's consistent with a best of 7.89 with a 1.77 60', 88mph.

[BIGT94z]

with stock longblock, 10308 springs, stock TB, and 1.6 rockers my car made 306/334 through a T56. and that was through a 9" and heavy ass Mcleod clutch (ask shane). i had every bolton you could get with a ignition box and 152k miles on the car when it was dynod on a mustang dyno :) car ran high 7's consistent with a best of 7.89 with a 1.77 60', 88mph.
nice man! i have a msd 6al and stand alone 2 step that shane forgot to add on my list. my car runs consistent 7.7x's in the 1/8th im prolly a tad bit lighter than u were. gotta love the simple stock motor times :claps: people dont beleive my mods when they see it run at the track :laugh: shane needs to get that clutch in asap before i knock him out and steal it :secret:

[YZF]

shane needs to get that clutch in asap before i knock him out and steal it :secret:

Puhlease sir. You're gonna need to man up a little if you want to take me down with a count.