Maxed out new fuel pump

[CandyCoatedZ28]

Yea so i had 42lb injectors maxed out so i bought 60lbs now i maxed out the new fuel pump i just put into the damn gas tank:(. So what is the next step into going into a fuel system had to put the 5600 chip back in. when its wanting to climb into the 7000s and pulling power still. :devil:

[Grr]

either twin intanks, or a fuelab brushless pump are your only real options. Maxing out a single walbro puts you right at around 600whp though, so at least your making power

[CandyCoatedZ28]

530RWHP 531TQ and that not even on a dyno jet just a mustang dyno. Probally has a litlle bit more they said. But yea i was really PO when I found that out. Because i wouldnt have even cut the hole under my backseat to put that fuel pump in. Thanks for the info which one is better and how much do they run for.

[MEAN LT1]

Put another pump on it with a hobbs switch. Or just run twins that are on all te time.

[Grr]

since you already have the one pump, contact racetronix or lonnies performance for a dual pump setup. 530 on a mustang dyno is getting close to 600dynojet hp, so your right on Q man

[CandyCoatedZ28]

so can i keep the one i have already installed are what do i have to do get 2 new ones are what.

[Grr]

call a place like lonnies or racetronix and tell them you have a new pump, they will work with you so you only have to buy 1

[BlownFormula]

Definitely do a dual intank. I run 72's with a dual intank setup. Runs flawlessly.