2-bar on stock PCM

[Grr]

wondering if any of you are running this? Im about to dive into it next week and would like a decent file to start my VE table with. Yes its a little work, but i know quite alot about this stuff, have the updated $ee with the BARO reset already, any help? info or helpful tips?
Gary

[Fire67]

I'm surprised no one else on here has any input on this one. I wish I could help, but all I can say is that I was going to give it go untill I started thinking about how much I disliked LT1edit and sold off all my stuff.

There are people on CamaroZ28 that have done it, and should be able to give some helpful pointers. Including some sample VE tables.

[BLOWNDFIZ]

I thought you got rid of the blower and are NA for now. Why would you want to run a 2bar tune NA? I know you are looking at a turbo for that thing, but driveability and resolution will suffer in the mean time. Plus you will never be able to tune above 0 vacuum NA.

I run a 2 bar speed density tune on my car, but I'm using Accel DFI. As far as tips, for part throttle tuning I prefer a load bearing dyno. You don't have to worry about driving and can concentrate on tuning. WOT, also on a dyno, but the WOT tuning is much easier. I'm not sure I offered any help there but we are working with two different tuning programs.

[Z28pr0jekt]

I thought you got rid of the blower and are NA for now. Why would you want to run a 2bar tune NA? I know you are looking at a turbo for that thing, but driveability and resolution will suffer in the mean time. Plus you will never be able to tune above 0 vacuum NA.

I run a 2 bar speed density tune on my car, but I'm using Accel DFI. As far as tips, for part throttle tuning I prefer a load bearing dyno. You don't have to worry about driving and can concentrate on tuning. WOT, also on a dyno, but the WOT tuning is much easier. I'm not sure I offered any help there but we are working with two different tuning programs.

this post was 2 months ago, someone else reupped it

[BLOWNDFIZ]

this post was 2 months ago, someone else reupped it
:embarassed::embarassed::embarassed: :laugh::laugh::laugh: Damn, I completely missed that!:laugh::laugh::laugh: :embarassed::embarassed::embarassed:

[Fire67]

yep, I reupped it... But i didn't know he got rid of his blower either. Figured that bringing it back from the dead would inspire some good conversation.

Oh well...