View Full Version : Spraying out of the hole on a tight stall?
pyro719
03-22-2009, 10:37 PM
I have a fuddle 3,000 stall but it only flashes to 2,000 on the motor, 2.0 60ft how low can I activate my nitrous to get a better 60ft? Im spraying a 150 wet nitrous outlet plate kit.
MeanGreen94Z
03-23-2009, 12:25 AM
i wouldnt go under 3k, but ive seen people go as low as 2200 but remember nitrous will ALWAYS make it flash higher. i accidentally sprayed my car with the window switch set at 2400 and i lost my 1LE elbow and a K&N air filter, and (dont ask how) the baffle in my SS hood...
I used to run a 40hp dry shot right out of the hole, 1400rpm on my pickup. Then i would drop a 150hp wet as i went past the tree, dropped almost .5 sec off my 60' times
Twisted Z
03-23-2009, 12:32 PM
It is going to stretch but that is pretty tight. I am guessing it wil push to 3,000 but I would log it N/A first. Maybe make a softer hit. it will still drop the 60.
jakesz28
03-24-2009, 07:56 PM
I sprayed a 150 shot right out of the hole many times with out a window switch. I would just hold the car at 1200-1400 and floor it when the light went green. All I used was a WOT switch.
After I got the window switch I still left it lower around 2200-2500. When the nitrous comes on early before the stall has a chance to flash up all the way the motor will just rev quicker.
If you are saying it only flashes to 2000, is that the rpm when the tires start to turn when your torquing the car up? If so I would still have to say it will flash higher if you flash it from about a 1000rpm's.
I'm sure some people have had problems with an auto but I haven't.
pyro719
04-13-2009, 12:03 AM
It foot brakes to like 1800 before it spins my et drags. It only flashes to 2000 off idle. I have the window switch set at 2800 now and it flashes to around 4000 when the juice hits. Just takes forever to get to 2800
Chased
04-13-2009, 03:43 PM
Ive always hit mine right out of the gates 125 to 200 stock block to forged its all the same to me:metal: its never skipped a beat
z28rob18
04-13-2009, 03:48 PM
i got an m6 but i sprayed it right outta the hole idk y wait till 3k to get the good stuff
pyro719
04-15-2009, 03:42 PM
Sweet! I'm going to set my activation @ 1800 and hope for the best
StangeatinZ28
04-16-2009, 03:42 PM
spray it right out the gate! i love it!
justanlt1
04-22-2009, 05:23 PM
i have a 6 speed and i spray 175 right after it starts to move to help prolong the 10 bolt lol or i used to but it blew on my 1.7 60ft
Divine02
04-23-2009, 04:58 PM
On mine when I ran nitrous I just held the car to 6 grand and sprayed 125 horse dry shot out of the hole. It works
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.