4k stall

[TechF1end]

so a friend gave me a 4000 stall, not sure brand, dont even think its been used but a handful of times. i have 3.73 im putting in this weekend and my friends want me to put in the stall at the same time. im pretty much stock other then some bolt on's, free mods, and tune, plus i have tunercats to tune myself. question is what other mods do i need to get the most out of the stall?

[IronOutlaw]

Definitly get a tranny cooler with a stall that big.
I know some people go with an aftermarket flexplate to.

[TechF1end]

Definitly get a tranny cooler with a stall that big.
I know some people go with an aftermarket flexplate to.


sweet does anybody recommend any certain coolers? or what is everyone else doing? i have a brand new flex plate you really think i should buy an aftermarket? i never really thought there was any difference? damn learn something new everyday lol do you think id be ok with out a cooler for awhile a long as i keep my foot out of it?

[warnerTA]

i would not even drive it without a cooler, but hey, when driving a lt1 who can ever keep their foot out of it...?:devil: :devil:

[PHINES LT1]

i would not drive much if at all with out the cooler. i am running a trans cooler fro the local auto parts store. it was like 40 bucks or so they aren't very expensive. the bigger the better.

[TechF1end]

i would not even drive it without a cooler, but hey, when driving a lt1 who can ever keep their foot out of it...?:devil: :devil:

i do agree with you fully lmao i cant ever keep my foot out of it :metal: but i dont have a job right now so i just sit at home and take care of my lil gurl so i can go awhile without driving till i get a cooler, thank god for craigslist or i wouldnt have any money lol

[TechF1end]

i would not drive much if at all with out the cooler. i am running a trans cooler fro the local auto parts store. it was like 40 bucks or so they aren't very expensive. the bigger the better.

ill prob have my buddy that works at oreillys pick one up for me, the funny thing is everytime i need something from oreillys they never have it, weird:doh:

[Z-RATED94]

Get a B&M stacked plate designed cooler. Works better than the cheapys. You might want to look into a shift kit too. The shifts are going to be a little soft otherwise.

[LT1RUNNER]

Another tune after the stall install is going to be needed too or your PCM will think your trans is slipping.

[TechF1end]

Get a B&M stacked plate designed cooler. Works better than the cheapys. You might want to look into a shift kit too. The shifts are going to be a little soft otherwise.

yea i had actually looked at the b&m racing cooler for 75 bucks for just cooler and 121 for the kit on jegs,i think that im going to buy jus the cooler, yea a friend said i can have his b&m shift kit, but my tranny already shifts really hard, but i plan on putting servos and shift kit in anyways especially when servos are cheap and a free shift kit lol

[TechF1end]

Another tune after the stall install is going to be needed too or your PCM will think your trans is slipping.

yea i have the stuff to change it but am just learning how to do it. i have TC