Oilpan question?

[Sinnz28]

I have a few parts coming in next week and while i am at it i am going to change my oil pan because the drain is stripped and is leaking everywhere.

which pan do you guy's recomend?
I have been looking at tpis or canton.
i just don't know anything about oilpan's.

[Fastbird]

Depends. If you're just running a stock or 355, you should be able to get away with a stock pan. If you're running a 383 however, you'll need an aftermarket pan to clear the extra stroke. Most people end up with a Milodon or Canton.

[Speed Inc.]

as Sean stated the stock pan is used most often with a stock or 355 setup

Canton is very popular otherwise

I run a Humburger pan and have done so on a couple other cars, but with tubular k-members. I'm unsure if it would work with a stock K-member.

I can get you most anything you need and even have a stock used pan in good shape. let me know if we can help.