PDA

View Full Version : OBD1 acting odd



slowdime
02-06-2009, 10:08 AM
For some odd reason the car's been throwning codes, and running with the efans on all the time, which is odd because its mid 20's or lower here . It doesnt seem to run any different though.

Codes it threw were:

26- "Quad-driver module or Quad-driver No.1 error" whatever that means
46- "VATS failure or PS pressure switch failure"

The VATS has been screwing up lately but idk wtf it has to do with running the fans, and I have no idea what the Quad-driver module is:confused:.

I'm going to re scan it today to double check, because these codes just don't seem right to me.

Z28pr0jekt
02-06-2009, 10:18 AM
For some odd reason the car's been throwning codes, and running with the efans on all the time, which is odd because its mid 20's or lower here . It doesnt seem to run any different though.

Codes it threw were:

26- "Quad-driver module or Quad-driver No.1 error" whatever that means
46- "VATS failure or PS pressure switch failure"

The VATS has been screwing up lately but idk wtf it has to do with running the fans, and I have no idea what the Quad-driver module is:confused:.

I'm going to re scan it today to double check, because these codes just don't seem right to me.

Any time your car throws a code, the fans will engage... it is a precaution

slowdime
02-06-2009, 10:21 AM
Any time your car throws a code, the fans will engage... it is a precaution

Well that explains that... now to get it to stop throwing the damn codes

Z28pr0jekt
02-06-2009, 10:42 AM
Well that explains that... now to get it to stop throwing the damn codes

I have no clue what the quad driver is but for the other one (seeing as it has VATS or...) is your steering acting the same?

Fastbird
02-06-2009, 10:56 AM
Here you go:

http://www.fastbird93.com/diagnostics/dtc26p1.jpg

http://www.fastbird93.com/diagnostics/dtc26.jpg

http://www.fastbird93.com/diagnostics/dtc46p1.jpg

http://www.fastbird93.com/diagnostics/dtc46.jpg

I think you can get a tune and have both of those deleted out. I KNOW you can tune out the QDM codes.

slowdime
02-06-2009, 11:32 AM
Thanks Fastbird. The QDM is no biggie as I'll be deleting most of the emissions here soon.

And the VATS I have no clue how to fix, its either in the key or the ignition switch itself. If I so much as look at the damn key the wrong way, it throws up the security light and wont start for 3 min's. That shit's already cost me a drivers' window lol.

Z28pr0jekt
02-06-2009, 11:33 AM
Thanks Fastbird. The QDM is no biggie as I'll be deleting most of the emissions here soon.

And the VATS I have no clue how to fix, its either in the key or the ignition switch itself. If I so much as look at the damn key the wrong way, it throws up the security light and wont start for 3 min's. That shit's already cost me a drivers' window lol.

Lol the car has done that to me in the past also.. try getting a new key... I still need to do that

slowdime
02-06-2009, 11:37 AM
Lol the car has done that to me in the past also.. try getting a new key... I still need to do that

TBH I dont even know where I could get a new key, in this BFE town im in here. Back home the Ace I worked at cut them and they were a PITA to program the chip, and 30-40 bucks. I'd hate to see what a dealershit would try to charge me:rolleyes:.

Z28pr0jekt
02-06-2009, 11:49 AM
TBH I dont even know where I could get a new key, in this BFE town im in here. Back home the Ace I worked at cut them and they were a PITA to program the chip, and 30-40 bucks. I'd hate to see what a dealershit would try to charge me:rolleyes:.

At the dealership I wanna say its 30-50$ i got a quote a couple years ago but never ended up getting one made

Fastbird
02-06-2009, 12:07 PM
Why not try to bypass the VATS and see if the troubles remain. If they do, it's in the module. If they don't, it's the key/receiver talking to each other.

Vats Key Pellet ID: http://shbox.com/1/4th_gen_tech2.html#pass_key

Vats Bypass: http://shbox.com/1/vats_bypass.jpg

Vats troubleshooting and operation: http://shbox.com/1/pass_key.html


Thanks to Rob (Shoebox) as always for the site there.

slowdime
02-06-2009, 12:16 PM
Why not try to bypass the VATS and see if the troubles remain. If they do, it's in the module. If they don't, it's the key/receiver talking to each other.

Vats Key Pellet ID: http://shbox.com/1/4th_gen_tech2.html#pass_key

Vats Bypass: http://shbox.com/1/vats_bypass.jpg

Vats troubleshooting and operation: http://shbox.com/1/pass_key.html


Thanks to Rob (Shoebox) as always for the site there.

Damn, just full of helpful today huh?:claps:

If the snow stays away I will try to bypass the VATS this weekend, not having a garage FTL.