camaroboricua
02-06-2009, 09:55 AM
Ok, so I wanted to put my gauges in the air vents in my T/A but I already had 2 1/16" gauges and I didnt want to spend a lot buying adaptors so I found the perfect solution.
I was at Home Depot and I saw some plumbing clamps that have a rubber insert that is the perfect size for both the gauge and the a/c vent hole. The clamp is made by Fernco USA and is PN 3001-22 and is $8 each.
Because of the small ring that the vent swivels on you have to take the rubber piece and grind a groove into it so it will not only hold itself but also fit without becoming distorted. Heres what it looks like by itself.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0769.jpg
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0770.jpg
And installed in the trim ring.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0771.jpg
Now you just wire up your gauges and snap them back into place. Heres what mine looks like.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0775.jpg
And a pic of the car its in, it was a sunny and warm day so I did the gauges, heater hose mod and of course gave it a bath. Hope this helps a few of you guys interested in this mod.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0776.jpg
__________________
I was at Home Depot and I saw some plumbing clamps that have a rubber insert that is the perfect size for both the gauge and the a/c vent hole. The clamp is made by Fernco USA and is PN 3001-22 and is $8 each.
Because of the small ring that the vent swivels on you have to take the rubber piece and grind a groove into it so it will not only hold itself but also fit without becoming distorted. Heres what it looks like by itself.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0769.jpg
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0770.jpg
And installed in the trim ring.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0771.jpg
Now you just wire up your gauges and snap them back into place. Heres what mine looks like.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0775.jpg
And a pic of the car its in, it was a sunny and warm day so I did the gauges, heater hose mod and of course gave it a bath. Hope this helps a few of you guys interested in this mod.
http://i415.photobucket.com/albums/pp238/camaroboricua/IMGA0776.jpg
__________________