Ballistic17's 95 Formula

[Ballistic17]

Currently has a Magnaflow catback and Jet Performance Products chip. Plans are to upgrade the suspension. Looking at UMI performance for that. Also want to get a ram air hood, different wheels and tires. To compliment the Magnaflow catback I'm looking at Speed Engineering long tubes and Y-pipe, a cold air intake. Will be researching for some other engine mods also.

https://uploads.tapatalk-cdn.com/20200612/1f79c032ff98bb794f1be4077ad9c4d9.jpghttps://uploads.tapatalk-cdn.com/20200612/b298840153eb764a7640bc4529160ea9.jpghttps://uploads.tapatalk-cdn.com/20200612/879804dd48a017e214b98c4667d31095.jpg

[Ballistic17]

Some appearance mods I'm looking at are the Trufiber 93-97 Firebird WS6 Style Ram Air Hood and thinking of painting ot like the second hood pic with the blue color from the 73 Trans Am 455 SD. Rims I'm looking at are OE Wheels Corvette C5 Z06 Replicas wrapped in Nitto NT 555 Extreme Performance tires.

https://uploads.tapatalk-cdn.com/20200613/ba1e1405c701bf0f40b4a7dce3cdd7b2.jpghttps://uploads.tapatalk-cdn.com/20200613/b54103a55455840be1daa41d6f11d8ef.jpghttps://uploads.tapatalk-cdn.com/20200613/e0f44d9d08e611acc96421dceb647a55.jpg
https://uploads.tapatalk-cdn.com/20200613/d4372495df5f03c3b587d2f6441a17f0.jpg

[Ballistic17]

Installed a UMI Performance strut tower brace today. The start of suspension work. Lots more planned.

https://uploads.tapatalk-cdn.com/20200614/287c7849c33d43bc753bbfc40ca4ef91.jpghttps://uploads.tapatalk-cdn.com/20200614/62328fad7de27c6ee55948fb7fc3b6f9.jpg

[Fastbird]

UMI does good stuff, can't go wrong with it.

[SSlowBoat]

looks good sounds like a good plan

[Ballistic17]

Anyone ever do this conversion? Torqhead 24x kit?

https://www.torqhead.com/buy-24xlink-products.html#!/1993-1997-LT1-F-Body/c/23575138/offset=0&sort=normal

[SSlowBoat]

Anyone ever do this conversion? Torqhead 24x kit?

https://www.torqhead.com/buy-24xlink-products.html#!/1993-1997-LT1-F-Body/c/23575138/offset=0&sort=normalplenty of people have, it works, but you are kind of stuck with his pcm then

Sent from my SM-N975U using Tapatalk

[Ballistic17]

plenty of people have, it works, but you are kind of stuck with his pcm then

Sent from my SM-N975U using Tapatalk

I thought I read that you can use HP tuners software to tune it and anyone that tunes with HP can tune it for you.

[SSlowBoat]

I thought I read that you can use HP tuners software to tune it and anyone that tunes with HP can tune it for you. has nothing to do with tuning. he repins a 0411 ls pcm to plug into an lt1 harness. if the pcm bricks, you have to go back to him for a new pcm. what if he goes belly up.

Sent from my SM-N975U using Tapatalk

[Ballistic17]

has nothing to do with tuning. he repins a 0411 ls pcm to plug into an lt1 harness. if the pcm bricks, you have to go back to him for a new pcm. what if he goes belly up.

Sent from my SM-N975U using Tapatalk
Okay. I understand what your saying now. Thanks.

[SSlowBoat]

Okay. I understand what your saying now. Thanks.its honestly one of the only reasons i havent gone to it yet on one of the cars. but now that our engine builder karl ellwein is using it and selling it, i may try it

Sent from my SM-N975U using Tapatalk

[JUNK_LT1]

SS, couldn't you just do the pin out on a regular 0411 pcm out of an Express or the like? In the event it bricks.

[SSlowBoat]

SS, couldn't you just do the pin out on a regular 0411 pcm out of an Express or the like? In the event it bricks.

different plug connections

[shownomercy]

SS, couldn't you just do the pin out on a regular 0411 pcm out of an Express or the like? In the event it bricks.


different plug connections

You COULD, in theory, just repin to a full 24x setup and run the OEM 0411 PCM. (Assuming you had the torquehead sensors setup and that PCM bricked)

But you better be good at reading/understanding schematics.

Or, be super cool and just swap to a holley :)

[SSlowBoat]

You COULD, in theory, just repin to a full 24x setup and run the OEM 0411 PCM. (Assuming you had the torquehead sensors setup and that PCM bricked)

But you better be good at reading/understanding schematics.

Or, be super cool and just swap to a holley :)yes, you can run the torqhead sensors with an efi connection harness/standard 0411 pcm. thats what i will be doing this winter.

Sent from my SM-N975U using Tapatalk

[Ballistic17]

Or, be super cool and just swap to a holley :)

Whats the Holley thing you talk about?

[shownomercy]

Once you have the 24x sensors on the motor, you can run any aftermarket Holley setup basically. Cheapest is the terminator X system right now.

Downside is you lose the factory dash if you do not add some custom wiring.

[Ballistic17]

Updated the dim stock headlights to some led's today.
https://uploads.tapatalk-cdn.com/20200711/e5b44171c054b3f6f2a17b05c31db530.jpghttps://uploads.tapatalk-cdn.com/20200711/409daad55844cbedadf2e29fe892a4d7.jpghttps://uploads.tapatalk-cdn.com/20200711/07ed447e272447955837f73071983464.jpghttps://uploads.tapatalk-cdn.com/20200711/0bd7ff55af4ef118ddcee435bada03c6.jpg