View Full Version : First Gen with an LTX
Shaggy67RS
09-12-2008, 02:12 PM
Anybody else have a first gen camaro/firebird with an LTX?
http://www.shagg.net/photos/Galleries//Camaro/67CHECAM971.jpghttp://www.shagg.net/photos/Galleries//Camaro/67CHECAM972.jpghttp://www.shagg.net/photos/Galleries//Camaro/Image001.jpghttp://www.shagg.net/photos/Galleries//Camaro/Image003.jpg
That rusty master cylinder sticks out like a sore thumb!
BrianEsser
09-12-2008, 02:24 PM
Beautiful!
I love those valve covers.
Shaggy67RS
09-12-2008, 02:39 PM
I ended up not being able to use them though, those pics are a little old. Had trouble with the alternator clearance since they're not notched. I tried getting an LT1 alternator relocation bracket that put it down low on the drivers side, but then ran into clearance issues with that since the 67's front cross member on the frame sits different than a normal 3rd gen camaro. Not enough space between the block and the frame to fit the alternator. I ended up getting a pair of notched covers off of Ebay, but they don't have the flames on them. They still look pretty good though.
The wire looms still have the flame design on them though. I've done a couple other appearance things too, need to get new pics.
phantomzer0
09-13-2008, 12:09 AM
Looks awesome!
i have a 69 firebird would love to do this swap, still waiting to get all the parts.
how did you get the ignition system to work? deleted vats i take it
and how did you do fuel lines and how is your fuel pump setup, stock tank?
nice swap looks good.
lt170chevelle
09-25-2008, 06:55 PM
looks nice man...i dont have an fbod but i have an abod with an lt1 and some bolt ons:innocent:
http://i92.photobucket.com/albums/l12/lt170chevelle/car005.jpghttp://i92.photobucket.com/albums/l12/lt170chevelle/car004.jpg
LT4SLOMARO
09-27-2008, 09:27 PM
Your car looks pretty sweet. I like it a lot.
Shaggy67RS
09-30-2008, 08:48 AM
i have a 69 firebird would love to do this swap, still waiting to get all the parts.
how did you get the ignition system to work? deleted vats i take it
and how did you do fuel lines and how is your fuel pump setup, stock tank?
nice swap looks good.
The previous owner did most of the work, but I'll tell you what I can.
It has vats tuned out (that parts pretty easy to do in the tune, basically just an on/off setting). There's an external fuel pump/filter, and it looks like the stock tank with a (badly done) connector drilled in for the return line. Looks like lots of some sort of putty or cold weld slapped around it. I'll probably be replacing the tank and doing a better job at some point. Right now if I fill it above about 3/4 it'll slowly leak gas from where the return line connects to the tank. Just a slow drip, but it makes the garage smell pretty bad.
I need to find a place that either has a modified first gen tank with a return line already built in, or maybe just a stock tank but with a dual sending unit.
lt170chevelle
09-30-2008, 11:30 PM
aww that sucks about the fitting...why dont you drain the tank,drop it, fill it with water, flash it, then get it welded on? thats what i would do...i hate stinkin up the garage with gas lol..still a damn nice ride man
jebcamaro
12-07-2008, 09:21 AM
I have a 67 camaro that I`m in the process of restoring and I`m installing a LT1 and 4L60E in it. I`m doing some trick stuff with it. It`s gonna be a blast! Your`s looks great!
Camaro_94
12-07-2008, 03:10 PM
Awesome rides guys!!!
I have a 67 camaro that I`m in the process of restoring and I`m installing a LT1 and 4L60E in it. I`m doing some trick stuff with it. It`s gonna be a blast! Your`s looks great!
Got any pics of it?!?!
A friend of mine is slowly restoring a 67 Camaro (but putting a LS1 in it).
TCGiRL220
12-07-2008, 05:22 PM
:drool:
jebcamaro
12-08-2008, 03:02 AM
I originally had a LS1 and 6 speed that I was going to put in it, but the engine and the 6 speed both had to be rebuilt. I sold my 01 ws6 and took partial trade on a 97 camaro with a freshly built 4L60E and completely built and all forged LT1 in it. So I pulled those to put in my 67. I`ll dig up some pics and post them up. Maybe I`ll start a build thread on here. I`m almost done with the body work on the car, so things should start moving a little faster. However, I don`t know if my pocket can keep up with my eyes anymore.:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.