Tail light not working correctly now

[zooguy]

Okay about 3 years ago when I was a daily driving the car the brake lights worked perfectly fine the car was parked for a couple of years for a new engine rebuild and dedicated drag racing build. So now the car is drivable again and the tail lights now are acting up everybody says to check my grounds and everything is good and tight I literally haven't changed or done anything so I don't know what's happened.

The video shows what's going on


https://youtu.be/CFctYDYuP_8

Sent from my SM-N950U using Tapatalk

[Injuneer]

Have you checked the sockets for corrosion? Seems like the bright filament for the brakes is still getting voltage without the brake pedal being pressed.

[Stormyweather]

Yeah that was a deal with mine had to change everyone. Sockets where crap.

Sent from my LGLS990 using Tapatalk

[fullforce]

Dont buy the dorman ones, they are JUNK

[zooguy]

Dont buy the dorman ones, they are JUNK

what do I buy then?

[fullforce]

That's a good question, I got 1 from Dorman witch I am using now but had to basically destroy it to get it to fit. I wonder if the ls1 style sockets will fit?

[tazman71]

LS1 sockets should fit. LS tail lights are always swapped into the LT cars, so should be the same.

[zooguy]

But where can I find some good NEW pigtails/sockets for the tail lights?

Sent from my SM-N950U using Tapatalk

[Stormyweather]

I got some from rock auto. Got the high dollar ones. Use heat shrink butt splices
AC Delco ones

https://www.rockauto.com/en/catalog/chevrolet,1995,camaro,5.7l+v8,1035908,electrical-bulb+&+socket,brake+light+socket,4008
Sent from my LGLS990 using Tapatalk

[zooguy]

So turns out the bulbs were in backwards.... no idea how that happened but fixed now

Sent from my SM-N950U using Tapatalk