Nitrous cam

[travail]

Do they make any good nitrous cam for the LT1. I have the cc306 with 1.6 rocker and the lift is int.544 and the ex.576 will it work well with a 150 shot. Do they make any nitrous plate for a 52-58mm TB to.

[Twisted Z]

Well a true N2O cam is really not needed until you really start pushing the juice.

What is your setup?

[travail]

CC 306
CC valve 918 spring
1.6 rocker
58MM TB
Accel 30lbs injector
accel 8mm wires
NGK plug
Walbro 255 Fuel Pump
headers
MSD cap & rotor
MSD coil
PCM for less tune
cold air intake
K&N filter
LT-4 SCM
2 1/2in exhaust

[WilRace]

youll be ok... i spray a 150 on a GM847, but for big nitrous a good off the shelf cam is the CC503, but cut on a 114LSA.

[Twisted Z]

The 306 should be good for a 150 shot no problems ;)

[jakesz28]

A wide split duration has more to do with nitrous then the LSA. If going for the big hits over 250 a 12-14 degree split in the duration is common with the exhaust be the lerger one. But anyways my old cc306 took more then a 150shot

[OutlawZ]

correct.... wide split durations and a more tame LSA is the norm on specific nitrous cams.....

The 306 will work just fine. You could go with a better nitrous specific cam for a tamer car around town but the 306 will work just fine for 95% of nitrous users up to 250 ish shots....

my cam is a 248/260 with a 114.5 lsa...... very nitrous specific for my combo cuz we intend to run ALOT of spray...

[MAKI]

the 306 is a good cam for nitrous.

damn outlaw thats a crazy cam! how much lift? solid or hydro lifter???

[Twisted Z]

His is a SR. Mine is a 240/247HR on a 112. we cut it for decent N/A and to take a 250RW shot ;)

[OutlawZ]

Yeah he's right it's solid.... With Jesel shaft rockers.... Car has been running since April and we have checked valve lash like 3 or 4 times since... it never changes.... Jesel shafts FTW!!!!!

Lift is .704 intake and .685 exhaust...... 1.7 intake rockers and 1.6 exhaust

[MAKI]

Thats extreme! Good luck with the upcoming 250 shot passes. Im def following your progress. Maybe a pic of your car sit ABOVE shep dogs on my wall in my living room lol.

[OutlawZ]

here's a good one if you want a good professional shot...

http://i31.photobucket.com/albums/c357/tensecLT1/badlaunch.jpg

[Twisted Z]

HEY! You got a flat tire there!


I GUESS it is a nice pic ;)

[MAKI]

printing asap... nice tire wrinkle.

[OutlawZ]

yeah it's probably my favorite pic...... i saw it at the photo booth at Pinks All Out vendor area they had setup....

Funny thing was it was already printed and framed and they had it hanging on the wall as an advertisement..... I bought it right off the wall for 40 bucks in a frame..... :D:D:D

appreciate it fellas....

[WilRace]

how much juice can i feed my 847? i was nervous about pumping the 150 shot through it, but i know my motor is ringged for big nitrous and ive had a 350 shot through this motor on the cc503 (114lsa) could i pump a 250 shot through it? if so ill be switching my elbows to my 2stage setup :)