Farewell LT1 For Sale Thread

[harner]

This is a preliminary For Sale thread. All parts are still on the car. I'm not sure of an ETA, yet. Long story short, a decision has been made on my car to move forward and in order to do that, I need to part out what I have currently.

Most parts are currently located in Ephrata, PA. I am located in New Ringgold, PA.

Bottom End 355ci LT1. Unknown mileage. Forged Probe pistons, stock crank/rods, ARP hardware. Make offer PENDING

LT1 stock 94 casting, 80k mile heads. Worked by Jensen Engine Technologies (lots of bowl work, stock valves). Comes with Crane springs with a couple hours of run time tops. Can also include comp magnum RR 1.6, but at this time will need to ship separately as I forgot them at the shop. 350 wo RR. SOLD

24x Conversion Kit including EFI Connection kit/reluctor, Custom BP Automotive Harness (with an EWP provision), set up for an auto car. Beautifully loomed, great quality. Not including PCM. Might include the coils which were brand new and have a few hours of run time. I can throw in the timing cover and sensor if we agree on the right price. $750 OBO SOLD

Canton valve covers $150 OBO SOLD

Ford SVO Red Tops, ~35ish# but need to double check - NO LONGER FOR SALE

Meziere Electric Water Pump $75 (not the larger flow pump, unsure of model offhand) SOLD & SHIPPED

Cam 230/242 Comp Cams grind, can provide more info if seriously interested. This was a custom grind from GPTuning AKA lt1z. $250 SOLD

Stock ported intake (to match 58mm TB and heads) $125 TB sold separately. Not including NO Plate. NO LONGER AVAILABLE

58mm BBK Throttle Body $100 Sold & Shipped

Hooker Headers uncoated (sprayed with high heat temp paint) and Y pipe. Has like 13k miles total, seriously. $350 NO LONGER AVAILABLE

Canton 7qt oil pan with pickup tube $150 Sold

Melling 10552 with hardened shaft $60 Sold

ATI Super Damper $275 shipped https://m.summitracing.com/parts/ati-917268 Bought as a display unit from Summit. Resealed by Summit, but signs of wear on the back and ATI sticker on the pulley from shipment. SOLD

LT1 stock fuel rails with Aeromotive FPR $80 shipped SOLD & SHIPPED

TrickFlow Ceramic Intake Elbow 40 SOLD & SHIPPED

Comp Cams Magnum Pushrod 7.200" 7608-16 $75 SOLD

Comp Cams Magnum Roller Rockers 1.6 1418-16 $120 SOLD

Comp Cams Lifters SOLD

There should be more to come, let me know if you're seriously interested. I probably can't get to anything for a week or two (or three, I've been busy as hell lately).

Thanks,
Chris

[1QUICKZ28]

Interested in WP. PM sent


Sent from my iPhone using Tapatalk

[popo8]

:(

LTXtech.com IS my drug...
OWNER/ADMIN

[harner]

Interested in WP. PM sent


Sent from my iPhone using Tapatalk

Responded!

[harner]

:(

LTXtech.com IS my drug...
OWNER/ADMIN

LMK what you think about the nitrous kit in the FB message(s), sir :)

[popo8]

LMK what you think about the nitrous kit in the FB message(s), sir :)
Im pretty sure u have a deal. U wanna do a package deal with that cage... ? Lol

LTXtech.com IS my drug...
OWNER/ADMIN

[harner]

Man... Make me an offer. I don't really want to part with it (or have to) but money talks and I like seeing stuff go to a good home.

Here are the options...you know what I have into it.

http://uploads.tapatalk-cdn.com/20160803/228cd185e44c9244dfb198b054a4095e.jpg

:)

Sent from my LG-H900 using Tapatalk

[harner]

EWP sold

Sent from my LG-H900 using Tapatalk

[popo8]

All caught up now. Will work out a deal.

LTXtech.com IS my drug...
OWNER/ADMIN

[Camaro96]

Interested in the throttle body any pics

Sent from my SM-N915V using Tapatalk

[harner]

No pics. I'm hoping to take some later this week.

Sent from my LG-H900 using Tapatalk

[spikester7878]

pic of the valve covers?

[harner]

368593686036861

[Catmaigne]

You keeping the radiator?

Sent from my VS986 using Tapatalk

[harner]

Yes, rad is staying in the car.

Sent from my LG-H900 using Tapatalk

[spikester7878]

If I can find a place locally that can notch the passenger side for the alternator I will be interested in the valve covers, but if someone else can use them nbd.

[harner]

If I can find a place locally that can notch the passenger side for the alternator I will be interested in the valve covers, but if someone else can use them nbd.

You can always relocate the alternator. :)

[spikester7878]

I like my AC in Florida too much

[1QUICKZ28]

Wonder how hard it would be to convert that harness from an auto to a T56? Guess I need to make a call to BP and ask.


Sent from my iPhone using Tapatalk

[harner]

There has been some interest in the harness and how it would work with XYZ. I bought the 24x harness from BPAutomotive and I would pursue him for any answers you seek. What I can say about the harness is it has an ewp provision and the PCM "home run" length was extended to accomodate mounting the PCM inside the cab. I was also using a TBSS MAF (5 wire I believe), no A/C or emissions crap, and stock style injectors. Also, I did intend on using stock fans, but then upgraded to a Griffin/SPAL setup and cannot remember what was used at first to make them work. I ended up going back to a manual fan controller but unsure how they were tied in to the PCM initially.

I think $425 shipped to the lower 48 is a good deal on this, seeing as how he charges $550 and $750 for a standalone and regular conversion harness.

http://www.shop.bp-automotive.com/24x-Conversion_c25.htm

Also, it'll be another week or so until I can get to the car to take pics let alone pull parts.

[JodyJ]

How many miles on the injectors?

[harner]

Not sure, my apologies.

[harner]

Grabbed the heads, intake, rails, tb, TF ceramic elbow, injectors, fpr, ewp (sold), and ATI Super Damper tonight. Ready to ship!

Sent from my LG-H900 using Tapatalk

[1QUICKZ28]

PM me price on TF elbow please.


Sent from my iPhone using Tapatalk

[harner]

PM me price on TF elbow please.


Sent from my iPhone using Tapatalk
PM Sent (via Tapatalk)

Sent from my LG-H900 using Tapatalk

[harner]

I like my AC in Florida too much
And I forgot the valve covers and to take pics for you. Sorry!

Also, I'm hanging in to the injectors. They should work for the 5.3 build.

Sent from my LG-H900 using Tapatalk

[DeuceSS]

Might be interested in the heads

[harner]

Okay. I prefer not to ship the heads. Shoot me a PM with an offer, I can meet you in the Lehigh Valley somewhere which isn't too far of a drive. Heads come assembled with valves and Crane springs. Would make a great match for a mild cam.

[DeuceSS]

OK, hopefully my post count allows the PM

[harner]

Shipped a couple things out today and updated the list. I still have a lot of items to pull off the car.

Sent from my LG-H900 using Tapatalk

[harner]

Pics added

Sent from my LG-H900 using Tapatalk

[stormy69]

ill take the tb if still available. pm me paypal info

[harner]

ill take the tb if still available. pm me paypal info
PM Sent stormy69

Sent from my LG-H900 using Tapatalk

[DirtyBird1139]

58mm no plate for sale?

[harner]

The entire nitrous kit, minus LNC2000 is spoken for.

Sent from my LG-H900 using Tapatalk

[popo8]

The entire nitrous kit, minus LNC2000 is spoken for.

Sent from my LG-H900 using Tapatalk
What is lnc2000?

LTXtech.com IS my drug...
OWNER/ADMIN

[harner]

It is the timing tuner I used that went along with the 24x setup.

https://m.summitracing.com/parts/lpe-l460145297

Sent from my LG-H900 using Tapatalk

[DirtyBird1139]

How much for controller?

[harner]

Not looking to sell at this time. But $ talks, you're welcome to PM an offer.

Sent from my LG-H900 using Tapatalk

[harner]

Added pics of the ATI pulley

Sent from my LG-H900 using Tapatalk

[coZ28]

By chance can I get a shot of those Hookers and Y Pipe? Might be interested in that.

[harner]

I will be picking them up on Monday. Not really excited to ship them to TX, but for the right price I would.

Sent from my LG-H900 using Tapatalk

[SSlowBoat]

I will be picking them up on Monday. Not really excited to ship them to TX, but for the right price I would.

Sent from my LG-H900 using Tapatalk
Me and Ltconvert will see you next weeekend for that jungle gym

Sent from my SAMSUNG-SM-G935A using Tapatalk

[harner]

Looking forward to it!

Sent from my LG-H900 using Tapatalk

[coZ28]

Well I'm interested if you're willing.

Sent from my SAMSUNG-SM-J120A using Tapatalk

[harner]

Balancer pending

Sent from my LG-H900 using Tapatalk

[harner]

Balancer sold. Should have more pictures this Monday.

Sent from my LG-H900 using Tapatalk

[The Shop]

comp 1.6 rr and melling 10522 still available?

[harner]

comp 1.6 rr and melling 10522 still available?
Yes, although the oil pump will not come out for a couple weeks.

Sent from my LG-H900 using Tapatalk

[The Shop]

Yes, although the oil pump will not come out for a couple weeks.

Sent from my LG-H900 using Tapatalkprice on rockers....

[harner]

120 shipped. Here is the part number. CCA-1418-16 (from Summit)

Sent from my LG-H900 using Tapatalk

[More Cubes]

Can you send or post cam specs?

Thanks!

[harner]

http://uploads.tapatalk-cdn.com/20160917/fa3482a5a93dc156efad1e9a4a693b63.jpg

Sent from my LG-H900 using Tapatalk

[harner]

http://uploads.tapatalk-cdn.com/20160917/03f3f0bba72945f1819f93f7cb5086b1.jpg

http://uploads.tapatalk-cdn.com/20160917/3144854e5af14f09abb78d39bfd2f63c.jpg

Sent from my LG-H900 using Tapatalk

[harner]

Rockers and pushrods added!

Sent from my LG-H900 using Tapatalk

[harner]

Updated. Surprised I still have the valve covers!

[harner]

VCs sold

Sent from my LG-H900 using Tapatalk

[harner]

Updated, sold off a bunch of stuff this weekend. I have all of the 24x stuff minus the harness. I also picked up another ls1 PCM and can include it with the right price.

Sent from my LG-H900 using Tapatalk

[SSlowBoat]

Updated, sold off a bunch of stuff this weekend. I have all of the 24x stuff minus the harness. I also picked up another ls1 PCM and can include it with the right price.

Sent from my LG-H900 using Tapatalk
Idn why Ltconvert doesnt jump on this

Sent from my SAMSUNG-SM-G935A using Tapatalk

[harner]

Idn why Ltconvert doesnt jump on this

Sent from my SAMSUNG-SM-G935A using Tapatalk
I didn't know he was in the market for a 24x conversion. Might have to throw in a case of Schaefer if he's serious. Haha

Sent from my LG-H900 using Tapatalk

[SSlowBoat]

I didn't know he was in the market for a 24x conversion. Might have to throw in a case of Schaefer if he's serious. Haha

Sent from my LG-H900 using Tapatalk
He has add too bad with cars. Like the whipple blower sitting in the garage, or the nova in the barn. Lol

Sent from my SAMSUNG-SM-G935A using Tapatalk

[harner]

Just wait until he buys a V!

Sent from my LG-H900 using Tapatalk

[Ltconvert]

Ok now I'm interested


Sent from my iPhone using Tapatalk

[atlantadan]

Pics of Canton stuff?

[harner]

Everything sold or no longer available.

Sent from my LG-H900 using Tapatalk

[popo8]

Would u like me to lock it up?

LTXtech.com IS my drug...
OWNER/ADMIN

[harner]

Would u like me to lock it up?

LTXtech.com IS my drug...
OWNER/ADMIN
Yes, I should have more available and will open new threads appropriately.

Thank you.

Sent from my LG-H900 using Tapatalk

[popo8]

Ok... if u decide u want this one reopened... just let me know.

For now...

CLOSED.

LTXtech.com IS my drug...
OWNER/ADMIN