96LT1355Z28
05-24-2016, 09:34 PM
I'm changing up my setup and have some stuff taking up space. Shipped prices are to US lower 48.
-LE ported intake with Professional Products 58mm TB. TB has idle air circuit modification to correct the idle issues associated with them. Comes as pictured with all sensors, fuel rail, regulator and EGR block off plates (PCV has been plugged but can easily be used again). Only thing it needs is injectors and the removable check valve in the back of the fuel line to check fuel psi (I removed it to add a line for electric FP sender and can't find it now). My car went time in sig with this intake and 42# injectors. **SOLD**
-Pacesetter 1 3/4" LT headers. These were emission headers but were modified and then ceramic coated. Collectors were modified to use ball and socket rather than slip fit. Could be cutoff and made to use whatever style you want. **SOLD**
-4" over the radiator CAI with K&N filter, IAT sensor, and plastic radiator support. **NOTE**will not fit with AC condenser, requires cutting top of core support and extending IAT harness **SOLD**
-(2) Comp 1.6 SA rockers for 3/8 stud with polylocks $30.00 shipped
-Aeromotive adjustable FPR. Removed because I thought it was leaking but didn't fix my issue and has been in box for a few years. $40.00 shipped
-Jegs brand plastic "hi flow" MAF housing $15.00 shipped
-G Force SFI 3-2A/1 single layer jacket and pants used for 5 seasons, size is medium on both. The red bled onto the white stripe when it was first washed and pants have some discoloration but material on both is in great shape. Sizing chart HERE (http://www.gforce.com/sizing/suit.php) **SOLD**
-Group picture of stock parts all from 96 Z28:
(2) front wheel hubs (1 abs sensor connector is broken)
washer fluid tank
brake booster and master cylinder (master has metric to standard adapters included)
ABS motor
4x CPS reluctor
crank hub (has had key way added)
steam pipe with banjo bolts (does not leak, needs washers for bolts)
TB w/o sensors or coolant passage on bottom
parts store brand coil (single harness)
(2) parts store brand TPS
(2) ICM's (1) delco and (1) parts store brand
(3) Delco O2 sensors
(1) EFI Connection opti harness (96-97 vented)
$ make offers!
36608366093661036611366263661336614366153661636624 3662536617
-LE ported intake with Professional Products 58mm TB. TB has idle air circuit modification to correct the idle issues associated with them. Comes as pictured with all sensors, fuel rail, regulator and EGR block off plates (PCV has been plugged but can easily be used again). Only thing it needs is injectors and the removable check valve in the back of the fuel line to check fuel psi (I removed it to add a line for electric FP sender and can't find it now). My car went time in sig with this intake and 42# injectors. **SOLD**
-Pacesetter 1 3/4" LT headers. These were emission headers but were modified and then ceramic coated. Collectors were modified to use ball and socket rather than slip fit. Could be cutoff and made to use whatever style you want. **SOLD**
-4" over the radiator CAI with K&N filter, IAT sensor, and plastic radiator support. **NOTE**will not fit with AC condenser, requires cutting top of core support and extending IAT harness **SOLD**
-(2) Comp 1.6 SA rockers for 3/8 stud with polylocks $30.00 shipped
-Aeromotive adjustable FPR. Removed because I thought it was leaking but didn't fix my issue and has been in box for a few years. $40.00 shipped
-Jegs brand plastic "hi flow" MAF housing $15.00 shipped
-G Force SFI 3-2A/1 single layer jacket and pants used for 5 seasons, size is medium on both. The red bled onto the white stripe when it was first washed and pants have some discoloration but material on both is in great shape. Sizing chart HERE (http://www.gforce.com/sizing/suit.php) **SOLD**
-Group picture of stock parts all from 96 Z28:
(2) front wheel hubs (1 abs sensor connector is broken)
washer fluid tank
brake booster and master cylinder (master has metric to standard adapters included)
ABS motor
4x CPS reluctor
crank hub (has had key way added)
steam pipe with banjo bolts (does not leak, needs washers for bolts)
TB w/o sensors or coolant passage on bottom
parts store brand coil (single harness)
(2) parts store brand TPS
(2) ICM's (1) delco and (1) parts store brand
(3) Delco O2 sensors
(1) EFI Connection opti harness (96-97 vented)
$ make offers!
36608366093661036611366263661336614366153661636624 3662536617