HPE Stage 3 LT1 heads 208cc and LE Ported intake

[kgkern01]

I have a set of HPE Stage 3 ported 208cc heads, freshly milled with new valve seals and .650" lift springs, and a 92-93 LE ported intake as well as polished fuel rails. These heads flow ~280cfm and are ready to bolt on. Only reason I am selling them is I decided to go ahead and upgrade further to an AFR 210 setup.


$1300 shipped for both heads and intake.


https://c8.staticflickr.com/8/7178/27136617631_e0bf9bbc1a_z.jpg
https://c8.staticflickr.com/8/7628/26600389383_cdcab217ae_z.jpg
https://c7.staticflickr.com/8/7426/26599112694_005d6506b0_z.jpg
https://c8.staticflickr.com/8/7499/27136615511_ff60036882_z.jpg


They were never ran on my car after milling and valve seals, just bolted on, painted the intake mystic teal, then decided to go with the AFR's instead.


kgkern01@gmail.com as I rarely check my PM's on here.

[devildog1]

You will get about the same flow as AFR 210

Sent from my SM-N920V using Tapatalk

[kgkern01]

You will get about the same flow as AFR 210

Sent from my SM-N920V using Tapatalk

The AFR 210 LT4 Eliminators with additional Competition porting is what I switched to, not the regular Race ready 210's.

[kgkern01]

Heads are SOLD

LE Ported LT1 intake with polished fuel rails still available, $250 shipped.

[devildog1]

Oh....ok. got ya.

Sent from my SM-N920V using Tapatalk

[kgkern01]

Since the heads are SOLD, I made a separate thread just for the intakes I have for sale:
http://ltxtech.com/forums/showthread.php?30293-2-Intakes-for-sale-93-LE-LT1-and-Edelbrock-LT4&p=465454#post465454