LT1 AFR 210 heads, single plane intake

[Ponyhntr]

AFR210 LT1 heads, Competition CNC port, 72 cc chambers. Includes 1.6 Comp Pro Magnum rockers and Crane stud girdles. These heads have made 1100 rwhp with 25 psi of boost. They have 30 1/8 mile passes on them since freshened. Would be good for many combos, not just boost. I'll even throw in the 8.300" pushrods I ran with them. $1750

I also have a Edelbrock Victor EFI single plane intake, has been converted to work on LT1 heads, and has a custom nitrous spray bar in the plenum installed by Nitrous Outlet. Comes with fuel rails. $500

Buy it all for $2k. http://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif Prices plus shipping

363123631336314363153631636317363183631936320

[lt1porsche]

price on these shipped to 23832? just the heads because im carbed. thanks

[Ponyhntr]

price on these shipped to 23832? just the heads because im carbed. thanks
I can do $1850 shipped to you

[lt1porsche]

Okay I appreciate it. A little too much for me, I got a quote from another distributor for $1886 shipped to my door brand new and I really don't need the rockers or girdle because I have those already. You wouldn't be willing to separate those would you? And just sell the heads alone?

[Ponyhntr]

Okay I appreciate it. A little too much for me, I got a quote from another distributor for $1886 shipped to my door brand new and I really don't need the rockers or girdle because I have those already. You wouldn't be willing to separate those would you? And just sell the heads alone?

That's pretty cheap for the race ready 210 head. Without the rockers or girdle I can go $1600 shipped.

[Ponyhntr]

Monday morning bump. :)

[Jayz28]

Intake have any porting done on it? What all would I need to make it functional? Elbow?

[Ponyhntr]

Intake have any porting done on it? What all would I need to make it functional? Elbow?

It has been ported, but not really sure how much. To make it functional it depends on what direction you want to go. You can put a 4 barrel style TB on it, or use some sort of elbow with a round or stock-style TB.

[Jayz28]

It has been ported, but not really sure how much. To make it functional it depends on what direction you want to go. You can put a 4 barrel style TB on it, or use some sort of elbow with a round or stock-style TB.


I'd have to go a cheaper route. Like an elbow with a stock style throttle body. Not sure if that would produce power or not. The fuel lines is what concerns me. I don't want to tie up 500 bux in fuel lines. That could be expensive. Intake, fuel lines, regulator, elbow, etc. Let me think on it....

[beastz28]

What springs are on these heads? I will be running a big solid roller and would need strong springs, plus I have shaftmount rockers that I would run instead of the pro mags and girdles.

[Ponyhntr]

Sorry, they are now sold. Shipped them tonight. They do have a stout spring on them, I also run a very large solid roller.

[firebird_1995]

What springs are on these heads? I will be running a big solid roller and would need strong springs, plus I have shaftmount rockers that I would run instead of the pro mags and girdles.
http://m.summitracing.com/parts/cca-917-16
If you think those would work for you I've got a set NIB I'd sell for $100 shipped

[slammedchevy]

Do you still have the intake? And how much shipped to 76311

[Fastfbody92]

How much for the intake

[firebird_1995]

Do you still have the intake? And how much shipped to 76311


How much for the intake

^

Sorry, they are now sold. Shipped them tonight. They do have a stout spring on them, I also run a very large solid roller.