Chrizar
04-05-2016, 05:51 PM
parting out my 95 z28 broke a valve spring on the intake side of cyl 1. the shop that installed my spring installed them to tight, broke into 3 pieces.
cam swap parts all have less than 2k miles
Comp CC503 cam 224/230 112lsa 536/544 w/1.6 RR $180
Scorpion narrow body 1.6 roller rockers, need 1 replaced 22 bucks on summit. $160
trick flow 7.2 pushrods need 1 new less than 20 bucks on summit. $50
comp guideplates $20
gm lsx lifters less than 2k $75
summit racing oe oil pan, oil level, and pressure sensors $30 for pan and new oil level sensor
Canton Fab valve covers $150
ARP oil pan, intake manifold, water pump, and header bolts make an offer
LS1 Steering shaft $20
LT4 Knock Module $150
SLP Lid swap SOLD
Longtubes and catless Y pipe {Pacesetter non coated race style) with summit band clamps and arp bolts $200
1LE A/c delete pulley $30
Newer opti, coil, plugs, wires {Summit Street/Strip 8.5mm wires} Opti $40 wires $50
Coolant cross over tube changed out for AN fittings and Summit Racing flex hose $40 for fittings and hose to drop right in.
Texas Speed o2 extensions $20
AEM EUGO $120
Moates ALDL cable to tune, flash, and read the pcm through the OB2 port $100 cable} $50 for the cable
4L60E had 73k when installed about 80k now shifts fine with a new TQ converter $300
complete engine with valve covers, opti, sensors, rockers etc $400 firm
LS1 16" 5 spoke wheels, painted white, with Toyo Proxxes A4 tires bit over half tread left. $150 for wheels and tires PLUS i HAVE to have some wheels and tires to roll it around on, stock salad shooters and bald tires are fine. $150 and your rims/tires just to roll it on.
643 heads need machined $100
2 bolt main block, has a broken head bolt stick out 1/2 in on the drivers side. ran when pulled $100
dash pad with 1 tiny crack at the bottom of the vent $140
10 bolt non tcs 3:42's no whine but pretty sure it leaks $100 no brakes, $175 complete with rotors, calipers etc. Has NO ebrake equipment.
many more parts on the car, just ask if you need something. I'll get pics and price when I can, everything is OBO please don't waste my time low balling.
PICTURES
http://imgur.com/a/gMWRw (http://imgur.com/a/gMWRw)
text me for the fastest reply, Steve 517 749 6756
cam swap parts all have less than 2k miles
Comp CC503 cam 224/230 112lsa 536/544 w/1.6 RR $180
Scorpion narrow body 1.6 roller rockers, need 1 replaced 22 bucks on summit. $160
trick flow 7.2 pushrods need 1 new less than 20 bucks on summit. $50
comp guideplates $20
gm lsx lifters less than 2k $75
summit racing oe oil pan, oil level, and pressure sensors $30 for pan and new oil level sensor
Canton Fab valve covers $150
ARP oil pan, intake manifold, water pump, and header bolts make an offer
LS1 Steering shaft $20
LT4 Knock Module $150
SLP Lid swap SOLD
Longtubes and catless Y pipe {Pacesetter non coated race style) with summit band clamps and arp bolts $200
1LE A/c delete pulley $30
Newer opti, coil, plugs, wires {Summit Street/Strip 8.5mm wires} Opti $40 wires $50
Coolant cross over tube changed out for AN fittings and Summit Racing flex hose $40 for fittings and hose to drop right in.
Texas Speed o2 extensions $20
AEM EUGO $120
Moates ALDL cable to tune, flash, and read the pcm through the OB2 port $100 cable} $50 for the cable
4L60E had 73k when installed about 80k now shifts fine with a new TQ converter $300
complete engine with valve covers, opti, sensors, rockers etc $400 firm
LS1 16" 5 spoke wheels, painted white, with Toyo Proxxes A4 tires bit over half tread left. $150 for wheels and tires PLUS i HAVE to have some wheels and tires to roll it around on, stock salad shooters and bald tires are fine. $150 and your rims/tires just to roll it on.
643 heads need machined $100
2 bolt main block, has a broken head bolt stick out 1/2 in on the drivers side. ran when pulled $100
dash pad with 1 tiny crack at the bottom of the vent $140
10 bolt non tcs 3:42's no whine but pretty sure it leaks $100 no brakes, $175 complete with rotors, calipers etc. Has NO ebrake equipment.
many more parts on the car, just ask if you need something. I'll get pics and price when I can, everything is OBO please don't waste my time low balling.
PICTURES
http://imgur.com/a/gMWRw (http://imgur.com/a/gMWRw)
text me for the fastest reply, Steve 517 749 6756