Header Gasket/Bolts [Archive]

LT1BADZ

12-31-2015, 02:09 AM

Does anyone have a part number for the ARP header bolts? Also, I found the Felpro 1470 header gaskets, but also found people posting a Felpro 1406. Which one should I use?

Thanks

mattgw86

12-31-2015, 09:41 AM

I used the 1406 gaskets and they worked great. Can't remember the bolts part number right now, but I have the package in my house. When I get home, I'll post it up.

Sent from my SM-N920T using Tapatalk

Dan

12-31-2015, 01:11 PM

I used 1406. I have the arp number in my thread. I'll grab it for you

Dan

12-31-2015, 01:14 PM

https://uploads.tapatalk-cdn.com/20151231/2f18583532b44b0fc1df708bc8c56fa7.jpg

Cathead

01-03-2016, 12:01 AM

I use Fel-Pro 1406 header gaskets also with no problems

Sent from my SAMSUNG-SM-G900A using Tapatalk

Z28_Jay

02-10-2016, 02:05 AM

Little late seeing this but I went with a set of Percy's seal4good gaskets they're layered aluminum and reusable. I think they were around 20-30 bucks for the set. Haven't had a leak once and never had to tighten my bolts back down.

Sent from my XT1080 using Tapatalk

6 speed impy

02-10-2016, 09:11 AM

Little late seeing this but I went with a set of Percy's seal4good gaskets they're layered aluminum and reusable. I think they were around 20-30 bucks for the set. Haven't had a leak once and never had to tighten my bolts back down.

Sent from my XT1080 using Tapatalk

What He said:ditto:

harner

02-10-2016, 09:15 AM

1406 is the Impala gasket, correct? Meaning a free compression bump with them. It's been awhile.

Dan

02-10-2016, 12:04 PM

1406 is the Impala gasket, correct? Meaning a free compression bump with them. It's been awhile.
Header gasket, not head gasket. :D

harner

02-10-2016, 02:42 PM

5617 I believe is the Imp head gasket lol. Coffee didn't kick in yet earlier.

I always liked the SBC style gaskets that you can slip on with the header bolts on. Not sure on the PN anymore.

Badazz 97 TA

02-11-2016, 12:18 AM

Victor reins 5898 is the "impala head gasket" that's still available. The actual GM brand is not available anymore.......

I used the Felpro header gaskets as well. No problems with them staying sealed

NASTZ

02-15-2016, 10:51 AM

I went through 2 sets of percy's reusable aluminum gaskets before I came to my senses and bought the cheapest felpro set I could from oreilly's. Haven't had a problem since!