24x, injectors, single plane intake, versafueler for sale!

[Ryan Stout]

Efi connection wiring 24x harness. No plugs for MAF, AC, or O2s. Harness has been modified, but I will label all the wires, it is "hotrod style" right now. All modifications have been soldered and heat shrinked, no broken connectors. $ make offer

Billet coil pack brackets. $100

Prices are shipped

More pictures in post 18.

http://images.tapatalk-cdn.com/15/12/15/cca5b9e8a637bfc478bec6d417600781.jpghttp://images.tapatalk-cdn.com/15/12/15/f486f667bcc4bdcbc0d7cf2e9052ba87.jpghttp://images.tapatalk-cdn.com/15/12/15/cff858010647ece4bb095b93975d601c.jpghttp://images.tapatalk-cdn.com/15/12/15/4bbf1bcf4a27b48a86d7ab5067264277.jpghttp://images.tapatalk-cdn.com/15/12/15/4f5d9d9afdcb3d301ed1efff49fcbf5c.jpghttp://images.tapatalk-cdn.com/15/12/15/bf1acf80907780ff0a708cd2b5bf3824.jpghttp://images.tapatalk-cdn.com/15/12/15/689b21f1e89e2b26b73d1bf8bc1400e1.jpg

[shownomercy]

Price on just elbow?

[Ryan Stout]

Id like to sell it as a whole but if I dont, I'll keep ya in mind.

[Vicious95Z28]

Price, Ryan?

Sent from my SM-S975L using Tapatalk

[Ryan Stout]

Price, Ryan?

Sent from my SM-S975L using Tapatalk
Whatcha want a price on?

[Vicious95Z28]

Whatcha want a price on?
You said you wanted to sell it all so I was curious what you wanted for the whole lot?
I personally don't want to run a SD setup so could the harness be repaired to use the MAF?

Sent from my SM-S975L using Tapatalk

[Ryan Stout]

You said you wanted to sell it all so I was curious what you wanted for the whole lot?
I personally don't want to run a SD setup so could the harness be repaired to use the MAF?

Sent from my SM-S975L using Tapatalk
Total for everything is $1760 as it sits, I'd take $1550 for everything, shipped ($1500 if paypal as friends and family, I like to think my reputation is pretty good). If you want, I can change the MAP sensor connector to use a GM 1bar sensor, the 2 or 3bar and 1bar use different connectors.

I'd get and hold of BP automotive and have him make a MAF sensor harness. You'd just need 3 wires, connector, and pins. I'm sure he'd make you a good deal on one. You could run it with this harness or just have a separate loom for it. I have a PCM pinout to go with it to tell you what pin does what, if that helps, also.

[Jon114]

Would you sell just the 24x harness? Have any pictures of it?

Sent from my SPH-L710T using Tapatalk

[79LT1Monte]

PM sent

[Catmaigne]

Unrelated question... How hard was it to fit the 102mm TB on that elbow? I know Edelbrock says for use with the 90mm only but I never actually measured the opening.

[Ryan Stout]

Would you sell just the 24x harness? Have any pictures of it?

Sent from my SPH-L710T using Tapatalk
If I can sell my pcm and 24x stuff, yes. I'll pull it out of the car tonight.

[Ryan Stout]

Unrelated question... How hard was it to fit the 102mm TB on that elbow? I know Edelbrock says for use with the 90mm only but I never actually measured the opening.
Lemme go look, but I think it bolted right up minus 2 bolts, I had to drill them in the elbow, different bolt patterns. The opening itself is 102mm though IIRC.

[Jon114]

Ok let me know. Thanks!

Sent from my SPH-L710T using Tapatalk

[superspirit]

I'd be interested in the 24x minus the wiring and coils, let me know what you would want for it.

[TravisMcGill2000]

Price on just intake? No injectors Tb or elbow

[firebird_1995]

If you sell the bare intake I'd be interested in the rails and regulator

[Ryan Stout]

Price on just intake? No injectors Tb or elbow
Lemme make sure I can sell the elbow and TB and I'll get back to ya.

[Ryan Stout]

http://images.tapatalk-cdn.com/15/12/15/363e4504597d5a46a752ba7f80849d04.jpghttp://images.tapatalk-cdn.com/15/12/15/6a8e7a288c44411bb27a8069753ea764.jpghttp://images.tapatalk-cdn.com/15/12/15/0ec4036a0d8062d039af9902d76437c2.jpghttp://images.tapatalk-cdn.com/15/12/15/5b550fc43c09616ea62e906bc5b81761.jpghttp://images.tapatalk-cdn.com/15/12/15/875d8fdde53924a651a566a3e2fd1ac0.jpghttp://images.tapatalk-cdn.com/15/12/15/9f40b78f914f28d6c541bf5004cdada6.jpghttp://images.tapatalk-cdn.com/15/12/15/7e3a5bc5691ca1f0a160540ca3e4196d.jpg

If sold separately, the versafueler harness will be removed from engine harness (soldered and heat shrinked of course).

[rustykey]

Put me in line for the cam, crank reluctors and sensors and plug wires. If you need me to take the cover also I will but my harness is made for the EFI Billet Cover by BP Automotive.

[Ryan Stout]

Intake and 24x minus wiring is sold! Original post updated.

[rustykey]

Im interested in the plug wires. Which Taylor wires are they that you have custom fit?

[Ryan Stout]

Im interested in the plug wires. Which Taylor wires are they that you have custom fit?
I just got looking, they're actually Moroso, my bad. I bought just the wire and ends separately and crimped them all myself.

[rustykey]

Any chance you can tell me which Moroso plug wires they are? The Ultra 40? Send me a pic of the writing on the wires if you would like rustykey@hotmail.com.

[Ryan Stout]

Any chance you can tell me which Moroso plug wires they are? The Ultra 40? Send me a pic of the writing on the wires if you would like rustykey@hotmail.com.
No they're Blue Max. I'll send it in a few.

[Ryan Stout]

Bump.

[Ryan Stout]

Wires sold!!

[Ryan Stout]

Injectors sold!

[Ryan Stout]

Bump

[Ryan Stout]

Price drop bump!!

Hope everyone had a Merry Christmas!

[Ryan Stout]

Versafueler sold!

[Ryan Stout]

Harness and brackets sold!

Thread may be closed popo8

[popo8]

You got it man. Congrats on sale.

LTXtech.com IS my drug...
OWNER/ADMIN