post your hotcam dyno numbers

[tpivette]

so who out there is running the LT4 hotcam in their LTXs? whats the combo and what are you making at the wheels? track times would help as well.

guess ill go first:

96' Corvette (LT4, 6spd, 3.45s)
- free mods
- tune
- hotcam w Crane springs
- 5 angle valve job

previous owner stated the car put down 344rwhp but i have yet to dyno it myself. i did take it down to the dragstrip where it ran 12.24 at 116.38mph with a 1.96 60ft

whos next?

[grn95t/a]

95 t/a

stock heads
4160e w/a 3600 ulocked and loose
bolt on's
long tubes
hot cam w/10308-1 springs
dyno tuned

best was a 311 rwhp n/a


http://i121.photobucket.com/albums/o205/grn95ta/th_95TADYNOED.jpg (http://s121.photobucket.com/albums/o205/grn95ta/?action=view&current=95TADYNOED.flv)

[Fastbird]

345/360 to the wheels. Ported stock heads, Hotcam kit, Mac headers, Flowmaster piping w/a dynomax muffler, Meziere WP, PCMForLess dyno tune........that's aboot it.

http://www.fastbird93.com/Purple/Dyno/PurpleDynoTune.jpg

[lt1noob]

you guys with the hotcam, stock injectors are fine right? im still thinking of going with it even though everyone keeps telling me theres better cams for the price. its affordable and a niec simple streetable cam.

[KissMyWhtSS]

you guys with the hotcam, stock injectors are fine right? im still thinking of going with it even though everyone keeps telling me theres better cams for the price. its affordable and a niec simple streetable cam.
Yeah you'll be fine w stock injectors.

[93_355bird]

i dont have the hotcam, but its close enough(cc502)
http://i151.photobucket.com/albums/s153/93_355bird/dyno-1.jpg

[devonsZ28]

hopefully ill have the money to get my engine done by september, im gonna do the hotcam kit with a 58mm tb, ported heads and intake, and have it bored to a 355

[tomsws6]

hotcam
port polish stock heads:shit:
shorty's:censored:
dana 60
373's
6sp
360rwhp

ran shitty times. actually embarrased to postem.
13.3 @107 2.4 60ft:wheelchair:

i think somethings just not right but besides driver mod.................

[gregrob]

You could shave over 1/2sec off with that 60' time! The mph looks good for what youre putting down

[YZF]

i dont have the hotcam, but its close enough(cc502)



Nice torque numbers!

[KissMyWhtSS]

hotcam
port polish stock heads:shit:
shorty's:censored:
dana 60
373's
6sp
360rwhp

ran shitty times. actually embarrased to postem.
13.3 @107 2.4 60ft:wheelchair:

i think somethings just not right but besides driver mod.................Get that .60' Down, that's got EASY 12's in it.

[93_355bird]

Nice torque numbers!

Thanks. It doesnt seem to peak real high with hp , but it sure makes a good amount of low end tq...more than any cam only ls1 ive seen:cool:

[pyro719]

Mine put down 318/340 and 460 with a 150 shot on my 145,000 mile longblock

[clubgm93z]

Hot cam, 1.6rr, headers, 2otl, mild headwork,4.10s,A4... 325rwhp ( mustang dyno) haven't been to the track