PDA

View Full Version : Interested in a fog light GP/vendor?



harner
09-29-2015, 08:08 AM
So a few months back, I realized that the shop who was doing the "work" on my car destroyed my fog lights. They were from like 2007 or so. I got them on ebay and they didn't quite fit 100% as I had to modify the bracket, but it came with wiring if you were to bypass the oem switch, a bulb, and they were MUCH nicer then stock light output and a halo LED light that I never hooked up. Plus, the glass was clear versus the crap that was on the car. Anyway, destroyed.

So, I found the same vendor on eBay, bought a set relatively cheap. Same deal with the bunch of wiring, bulbs, except now the housing are actually quality. Thick glass and all around pretty heavy duty. I swapped out the bulbs for Osram Nightbreakers to match the H4 conversion I did with the same bulbs.

http://ltxtech.com/forums/attachment.php?attachmentid=34202&stc=1http://ltxtech.com/forums/attachment.php?attachmentid=34201&stc=1

I have it setup that the halos come on with the parking lights. The regular foglights operate normally. No fancy wiring, just some basic soldering, heat shrink, electrical tape, spare wire, and loom. As you see in the picture, the driver side wiring is not "tucked" properly so I'll be cutting and re-soldering, otherwise it's nice and clean.

The purpose of this thread is not for me to make big bucks. The fogs are cheap as it is for a quality upgrade. I asked the vendor to come on board here and sponsor the site. Due to his arrangement with the parent company and time restraints, he said I could basically sell the kits at a discounted rate.

So, with that being said, is anyone interested in upgrading their crappy OEM fogs?

Not going to post the ebay link, but the vendor is Blinglights aka blinglightshid. The kits normally go for 70-80. I'm willing to step up and make it happen if you're interested. I can provide more pics, also.

harner
10-14-2015, 08:03 PM
It sounds like this is a no go. Oh well ;)