NightTrain66
09-14-2015, 04:30 PM
I have a set of LE1 heads that I did for a customer that ahs fell on hard times and he is not able to pick up. As soon as they sell I will give him a refund and $$$ for his cores so he is out no $$$.
GREAT deal for someone.
They are LE1 heads that I threw in some sodium filled LT4 2.00/1.55 valves that I had in the shop (instead of stock 1.94/1.50 valves) for the guy and reused his Comp 26918 beehive springs, retainers, etc.
They flow 273/191 CFM. Almost like LE2 heads but these are 561 castings and you can't quite make a few areas as large as you can on the 643/374 castings so they flow a lil less.
Springs are set up @ 150 lbs on seat and can handle the XFI, Voodoo lobes, etc.
$1000 and NO CORES NEEDED or $800 if you send in your cores.
nighttrain66@msn.com
Lloyd Elliott
972-617-5671
Elliottsportworks.com
GREAT deal for someone.
They are LE1 heads that I threw in some sodium filled LT4 2.00/1.55 valves that I had in the shop (instead of stock 1.94/1.50 valves) for the guy and reused his Comp 26918 beehive springs, retainers, etc.
They flow 273/191 CFM. Almost like LE2 heads but these are 561 castings and you can't quite make a few areas as large as you can on the 643/374 castings so they flow a lil less.
Springs are set up @ 150 lbs on seat and can handle the XFI, Voodoo lobes, etc.
$1000 and NO CORES NEEDED or $800 if you send in your cores.
nighttrain66@msn.com
Lloyd Elliott
972-617-5671
Elliottsportworks.com