HELP ME !!! i need piston rings

[zooguy]

any sponsors on here can i get some help from?

i need a full set of rings ... top ring is 1.2mm second is 1.5mm and a 3mm oil ring .... HELP PLEASE

i am building a 350 lt1 for a healthy shot of nitrous ... and i cant find a set in these sizes anywhere.

[firebird_1995]

What about mixing two kits to get what you need?
http://m.summitracing.com/parts/pcr-42084cp
http://m.summitracing.com/parts/pcr-41858cp 96LT1355Z28 American-Powerhouse

[96LT1355Z28]

Be happy to help you out, looks like the parts Chris linked are special order. We can get them but I'll need your zip code for a shipped price.

[firebird_1995]

I just used them as an example Josh. I figure someone out there has a ring pack that he needs

[zooguy]

zip code is 73008

[96LT1355Z28]

I found THESE (http://www.summitracing.com/parts/tsr-ms4701-5/overview/) but they're $$ and are only recommended for mild NO2.

[zooguy]

http://www.jepistons.com/Products/J9ODA1-4000-3.aspx

i found these .... i dont know any thing about the materals and how they do with nitrous but

the top ring is : stainless steel, Titan Nitride, Barrel Faced, Back cut, Neutral
the second ring is : Iron, Phospate, Taper Face, Back cut, Reverse Torsional
the oil rings is carbon steel, chrome, flex vent

so what does that mean a guy like me .... not much ... can i get some help

[96LT1355Z28]

When it gets down to those specifics I'm not gonna be any help! You might call JE or total seal and see if they can answer some questions, then come back and explain it to the rest of us! According to THIS (http://www.enginebuildermag.com/2012/10/performance-piston-rings/) article stainless rings can't be used in a cast iron bore without a coating.

[zooguy]

still looking for a set of rings that is less than $400 this is hard

[zooguy]

http://m.summitracing.com/parts/pcr-42084cp

these are Plasma-Moly do yall think they will hold a 250 to 300 shot of nitrous if i have a tune made to handle it?

[dawdaw]

Plasma moly and nitrous are a no no especially on that large of a shot. Buddies motor had the coating flake off after a while.

[zooguy]

FOUND THEM >>>>> YAY <<<<<< i found the rings i need to get ... after spending about 6 hours calling around to EVERYONE who makes rings .... total seal asked me evey question i could think of and some i couldnt ... but they said this is the rings for me

http://www.summitracing.com/parts/tsr-csh47015


Chromium nitride top ring facing material on a steel ring

[zooguy]

Chromium nitride top ring facing material on a steel ring​