Can you pull the oil pan with engine in car?

[waltsfastz]

IF the trans and clutch is removed? It has a stock k member

[Chris]

Yes, done it before with a 6 speed. you will need to lift the motor till it almost tops out on the trans tunnel though and turn the crank to clear it in certain spots.

[casey20000007]

I did just recently I used this http://images.tapatalk-cdn.com/15/07/13/f0c58769d1b479a9e5402ab10a1b5b0f.jpg got it from harbor freight


Smoke tires not drugs

[JPack]

Just did my sons with an automatic. He has a tubular k member though. We pulled the through bolts on motor mounts and engine hoisted it up. Came right out. Crank counter weight was even in right position. Make sure to take oil level sensor out before you remove pan.

[dawdaw]

Just did one on my buddy's lt1 rx7

[waltsfastz]

When I get it to my shop on the lift We may go for it. Thanks for the input

[casey20000007]

When I get it to my shop on the lift We may go for it. Thanks for the input

Did yall get it ?


Smoke tires not drugs

[waltsfastz]

Na, The guy didn't want to mess with it so neither did we.

[casey20000007]

Well what the hell lol


Smoke tires not drugs