Floor pan for 94z??

[savage388]

I've been searching here in western pa forever for a good passenger floorpan and have came up with absolutely nothing, do any options exist for the lt1 in the after market? Its not in fantastic shape but I'd still hate to have to part/junk it over one rusty floorpan.

[Fastbird]

Nothing in the aftermarket that I've ever seen. Possible to put a patch panel in instead? Maybe remove that doggone carryover hump from the 3rd Gen's while you're at it?

[savage388]

My fab skills are way too basic to make a floor patch, that and the whole thing is rotted from the inside out from a leaky window the po never fixed. Would it be possible to use a 98-02 floor as a replacement? There's plenty of them around here.

[popo8]

What year car do u have?

[savage388]

What year car do u have?
Its a 1994 so it has the passenger floor hump.

[95albinobird]

pic's of damage?
they don't rust out in NC or most of the south someone here should be able to help.all it takes is a quick trip to the salvage yard and a sawzall....

[savage388]

pic's of damage?
they don't rust out in NC or most of the south someone here should be able to help.all it takes is a quick trip to the salvage yard and a sawzall....
I'll try to get some tomorrow or Monday. I wonder what shipping on a floor pan would be lol

[popo8]

pic's of damage?
they don't rust out in NC or most of the south someone here should be able to help.all it takes is a quick trip to the salvage yard and a sawzall....
Thats what i was gonna ask. Hell the floor on my donor 95 camaro is solid and im in PA. Im using a section of the driver side for my 94 ta.

[Spartan7]

Would it be possible to use a 98-02 floor as a replacement? There's plenty of them around here.

Sure would, they're practically identical (stupid floor hump and all). The only difference I know of is there was a change in some of the bracing for the transmission mount.

[savage388]

Sure would, they're practically identical (stupid floor hump and all). The only difference I know of is there was a change in some of the bracing for the transmission mount.
Okay that's good news. I haven't forgot about the pics, the car isn't at my house and Ive been working too much to get over there. But the whole thing is pretty much shot, here's a hole in the back seat floor area and some small ones along where it meets up with the pinch welds

[popo8]

Come to pa and cut out what u want from my donor... u can have it

[savage388]

How far east are you? I'm about 65 miles east of pittsburgh

[popo8]

About as east as u can get... bout 40 miles west of Phila.

[savage388]

About as east as u can get... bout 40 miles west of Phila.
Wow, thanks for the offer man, I don't think I can make that drive, four hours each way is a lot of gas money for me lol

[Featherburner]

https://www.shermanparts.com/ecat/base/dropdowns.php?make=Chevrolet&model=Camaro&year=1994

[popo8]

Wow, thanks for the offer man, I don't think I can make that drive, four hours each way is a lot of gas money for me lol
I hear ya

[savage388]

https://www.shermanparts.com/ecat/base/dropdowns.php?make=Chevrolet&model=Camaro&year=1994
I didn't see this until now, I see there's two parts for the pass pan, which one would I want. The rust has gotten super aggressive and totally destroyed the passenger floor since I put it in storage, its not safe to sit in at this point. Moneys really tight but I have to do this or it'll rot the rear frame rails. If I could afford a roller I'd just swap my stuff in, its already an r-title so its not worth soaking more into than I need to

[MrAngry]

Anyone know if the Firebird floors are different? Shouldn't be, but Sherman lists them for the 94 Camaro, but not the 94 Firebird.

Sent from my SM-G900V using Tapatalk

[popo8]

Same in my 95 canaro parts car and my 94 ta

LTXtech.com is my Drug...

[MrAngry]

Cool, thanks Popo.

Sent from my SM-G900V using Tapatalk