Insanez
03-08-2015, 06:12 PM
All item for sale in Northeast Ohio(44077 area). All items are used unless noted. I will ship all items, some have the price included(lower 48 states), the rest will be at your expense. I accept PayPal, Cash, or credit/debit cards. If you pay with PayPal, I will never ask or accept payment as a gift, I want the protection as you should. If you want to see my feedback, you may check eBay or LS1Tech.com for seller InsaneZ. I do work a lot and have 4 kids, all items will be shipped within 2 business days so I have time to package.
LT1 4 Bolt main block. All machine work done at ISON Racing Engines(owned by Cometic Gasket). Block was magna fluxed, sonic checked, bored and honed to 4.060” at 9.010” deck height. Block was machined to run MLS head gaskets and stroker crank. Has stock caps, ARP studs, bearings for below crank installed. Was originally going to be a N/A solid roller motor, then went another route. I have over $1200 invested-$450-sold
32075
K1 Technologies Billet 6.0” length H Beam connecting rods, will ship in original box, never used-$400 shipped-sold
32064
K1 Technologies 3.75” stroke crank, 4340 forged, one piece seal, was installed in motor for a day to size bearings, never ran part number 350-3750BB6F-OPS**-$400 -sold
32074
LS1 Driveshaft-$75
32073
LT1 F Body ProCharger Bracket with hardware, setup for 12 rib pulleys, comes with hub spacer and 3.4” supercharger pulley and 7.65” crank pulley-$450 shipped SALE PENDING
32072
F Body ProCharger Dual Intercooler setup(old style), comes with both intercoolers(both have dents and were pressure checked for leaks when I bought them, piping is steel and needs blasted and repainted, some couplers are included, kit is NOT 100% complete-$200
32071
LT1 F Body AC Delete Pulley, Factory, Brand New-SOLD!
32069
Vortech Supercharger elbow, cut to fit any air intake, has hole in coupler for opti vent tube -SOLD!
32070
LT1/4 Corvette Fuel Rail covers with GM studs, all has never been out of original factory packaging-$125 shipped
32068
LT4 Composite Valve Covers with Factory studs/bolts, driver side has small scuff to the back,cannot notice but wanted to put it in the sale so there is no complaints-$300 shipped
32066
LT1 Computer-I started to polish it, has LT1 M6 1996 tune on it-$75 shipped
32065
Brand New Cloyes Billet timing set, 9 keyway setup Part Number 3100B-9-$65 shipped
32067
Stuff not pictured:
Brand New Maximizer by OBX(exact same headers and part number) Long Tube Stainless headers, still in the box-$325 shipped
LT1 4 Bolt Main all stock block, needs machined, $100
I have lots more and will do round 2 next weekend.
I am going an entirely different direction with the car and this is to fund that, after 15 years of owning it, it's time for a redo.
Again, I work a lot, 4 am until 2 or 3pm and go to bed at around 8pm. If you email me direct at 1zero3dotcom@gmail.com or PM me here, let me know you did message me so I can check the other box. If you have any questions, just ask, I will answer when my kids are not up my but.
Thanks,
Steve
LT1 4 Bolt main block. All machine work done at ISON Racing Engines(owned by Cometic Gasket). Block was magna fluxed, sonic checked, bored and honed to 4.060” at 9.010” deck height. Block was machined to run MLS head gaskets and stroker crank. Has stock caps, ARP studs, bearings for below crank installed. Was originally going to be a N/A solid roller motor, then went another route. I have over $1200 invested-$450-sold
32075
K1 Technologies Billet 6.0” length H Beam connecting rods, will ship in original box, never used-$400 shipped-sold
32064
K1 Technologies 3.75” stroke crank, 4340 forged, one piece seal, was installed in motor for a day to size bearings, never ran part number 350-3750BB6F-OPS**-$400 -sold
32074
LS1 Driveshaft-$75
32073
LT1 F Body ProCharger Bracket with hardware, setup for 12 rib pulleys, comes with hub spacer and 3.4” supercharger pulley and 7.65” crank pulley-$450 shipped SALE PENDING
32072
F Body ProCharger Dual Intercooler setup(old style), comes with both intercoolers(both have dents and were pressure checked for leaks when I bought them, piping is steel and needs blasted and repainted, some couplers are included, kit is NOT 100% complete-$200
32071
LT1 F Body AC Delete Pulley, Factory, Brand New-SOLD!
32069
Vortech Supercharger elbow, cut to fit any air intake, has hole in coupler for opti vent tube -SOLD!
32070
LT1/4 Corvette Fuel Rail covers with GM studs, all has never been out of original factory packaging-$125 shipped
32068
LT4 Composite Valve Covers with Factory studs/bolts, driver side has small scuff to the back,cannot notice but wanted to put it in the sale so there is no complaints-$300 shipped
32066
LT1 Computer-I started to polish it, has LT1 M6 1996 tune on it-$75 shipped
32065
Brand New Cloyes Billet timing set, 9 keyway setup Part Number 3100B-9-$65 shipped
32067
Stuff not pictured:
Brand New Maximizer by OBX(exact same headers and part number) Long Tube Stainless headers, still in the box-$325 shipped
LT1 4 Bolt Main all stock block, needs machined, $100
I have lots more and will do round 2 next weekend.
I am going an entirely different direction with the car and this is to fund that, after 15 years of owning it, it's time for a redo.
Again, I work a lot, 4 am until 2 or 3pm and go to bed at around 8pm. If you email me direct at 1zero3dotcom@gmail.com or PM me here, let me know you did message me so I can check the other box. If you have any questions, just ask, I will answer when my kids are not up my but.
Thanks,
Steve