No power for harness

[MI6TA]

Threw my brand new battery in, connected it to the starter and alternator. The 3rd positive wire I bolted my amplifier power wire together and taped it up. The grounds I see are tight. I'm missing the red oval ground box by the battery on left shock tower so I just drilled and tapped 2 holes for all those grounds.
Now the problem, I turn the key and get no dash lights at all, no fuel pump prime, no power at fuse block... What did I miss?

Sent from my LG-VM696 using Tapatalk 2

[JPack]

That red oval box is positive hook ups. If you attached those to the shock tower, thats a direct short. Remove them and isolate and do it right. Then replace the fuses you blew

[Fastbird]

That red oval box is positive hook ups. If you attached those to the shock tower, thats a direct short. Remove them and isolate and do it right. Then replace the fuses you blew
This. Exactly.

[Spartan7]

And then hope you didn't fry some fusible links or wires anywhere else.

[MI6TA]

I'll check fuses next time I work on the car. I realized that those weren't grounds and connected them correctly and actually got the car to start for the first time. I will be buying the red box once I find it on the Internet, for now I have a cheap fix. Heads up there's a b word in the video

https://www.youtube.com/watch?v=k-fwfUzaHno&feature=youtube_gdata_player

Sent from my LG-VM696 using Tapatalk 2