LT1 GTP Stage2 heads [Archive]

knight367

01-06-2009, 11:41 PM

i have a set of GTP stage 2 ported lt1 heads. havent been ran since they were ported would like to get $1200 from the set

http://gtp-racing.com/ (http://gtp-racing.com/)

knight367

01-08-2009, 12:00 AM

to the top

knight367

01-08-2009, 11:21 PM

to the top

knight367

01-14-2009, 02:05 AM

bump..

knight367

01-20-2009, 04:11 AM

ttt..

knight367

02-08-2009, 11:12 PM

bump..

knight367

02-13-2009, 12:11 AM

ttt..

bricez28

02-13-2009, 06:22 AM

bump for dethklok avatar.

95 TA - The Beast

02-14-2009, 12:35 PM

Umm, not trying to be a dick here, but how can you say they were never run since you obviously media-blasted the heads?

I mean look at the ports, they were obviously ported but are identical to the finish of the rest of the head. Also, the flange surfaces and decks are no longer machined surfaces and also the exact same finish. Not to mention the springs are all rusty, and would need to be replaced.

Porting leaves a machined surface, and there is no reason to media-blast a head other than to clean it up...

Maybe a little more honesty would be helpful in selling these heads... They normally went for $1200 brand new, thus I can see why you priced them like that, and with the dye on the valves on the one head it looks like they were checked over, but you stated nothing about a fresh valve job (which would be required for a stage 2 head), new guides or any details on the springs used/needed, etc...

At the most those heads are worth about $600 since anyone would reasonably need to do all I mentioned before they run them, as well as having them decked to be sure you wouldn't blow a headgasket...

Again, not being a dick here, just pointing out the obvious to those that aren't used to looking at stuff like this...

Granted, ask what you want, but also expect others to give a reasonable overview of what they are based on the pictures...