camaro ram air

[gwoodtitansz28]

anyone know what i need to make the harwood ram air hood for camaros functional?

[KissMyWhtSS]

What's it look like? It's not a cowl hood is it?

[gwoodtitansz28]

its this one.
http://www.eharwood.com/images/12202.jpg

[phantomzer0]

Do they advertise it as being functional? I think any solution that has a filter plug directly into the maf would work just fine, as long as it is exposed.

These are the FIPK by K&N, the pictures are on an LS1, put I'm pretty sure the GEN2 version of it is the exact same as these.

37

38

[KissMyWhtSS]

Yeah you could prob fab up a LS1 FIPK or maybe a ultra-z/ws6 airbox.

[gwoodtitansz28]

ya thats what i was thinking. there are some ultra z kits on suncoast but they're like $340 bucks. i could probably use some weather stripping to seal the filter to the hood. maybe i can buy it part by part on ebay.

[gwoodtitansz28]

the site says ram air but it doesnt say anything about it having a kit. im sure it wouldnt be to hard to fab it

[BLK95TA]

i bet you could also grab an oem WS6 airbox..I think you can get a lid from SLP for $85 that doesn't say "pontiac ram air" on it, i got my whole kit (upper and lower box, K&N filter, and both the MAF to TB bellow and a TB to box coupler which i didnt use because my stock one off my own MAF was in better shape) for $115 shipped but from what i've seen that was a steal and not likely to happen to everyone.

http://i237.photobucket.com/albums/ff279/pdennis93/generic%20photos/100_0115.jpg

[jaysz2893]

I got the ultra z hood and box. SLP want way too much IMHO. The box is nothing more than a stock WS6 box. THe lid was cut out to expose the whole filter. You can piece one together probally pretty reasonably. I have a 93, so i dunno about fitting a MAF in there, but it is tight between the box and the TB. I used parst from my K&N Cai to make the coupling. Hope this helps..
http://i4.photobucket.com/albums/y136/TheKeenans/IMG_1407.jpg
http://i4.photobucket.com/albums/y136/TheKeenans/IMG_1408.jpg
http://i4.photobucket.com/albums/y136/TheKeenans/IMG_1409.jpg

[slp ss]

I have a suncoast air box for sale it is part no. 21001k I have $42.00 in it. it is for a 93-97 camaro it is air box only.

[BLK95TA]

I got the ultra z hood and box. SLP want way too much IMHO. The box is nothing more than a stock WS6 box. THe lid was cut out to expose the whole filter. You can piece one together probally pretty reasonably. I have a 93, so i dunno about fitting a MAF in there, but it is tight between the box and the TB. I used parst from my K&N Cai to make the coupling. Hope this helps..




shouldn't be a problem, that smaller coupler you have is the equivelent of a MAF sensor. here's an old pic of my engine before i had the intake manifold gasket painted earlier this summer (and had the intake painted black)

http://memimage.cardomain.com/member_images/2/web/2066000-2066999/2066627_235_full.jpg

[gwoodtitansz28]

do you guys get more gains with your ram air than with a regular cold air? im sure its a little more. i think ill go with the cheapest thing i can get cuz im gonna have to modify anything most likely