TB

[blk4mula93]

hey guys,

Im in the market for a TB and deciding between a 58mm or a monoblade, thoughts on power and efficiency and also can you still do the tb bypass with a aftermarket tb?

[popo8]

dzltek


Tim has one for sale...I believe a BBK 58mm.... just am fyi
MEMBER @ LTXtech.com

[96LT1355Z28]

If you decide to go new send me a PM. Most people are good with a 52mm which flows around 835 cfm, 58mm is equal to around 1050 cfm. The stock 48 is about 665, or 710 with an air foil. Flow numbers are from a Superflow SF600 corrected at 28". Manufacturer differences will flow different numbers not to mention the engine size etc. so these aren't exact, just a reference. If you think like the old carbs most stock 350's were good with a 650-750 cfm carb.

[SSlowBoat]

we just got a tpis 58mm dual blade for a elliot heads/cam car....NO RESTRICTIONS lol

[dzltek]

i have a bbk power plus 58 mm for sale. It does have a couple issues but its in working condition. Theres a couple of screws on the bottom that are stripped out. If you do the tb bypass then you will not have any issues. Also, I had to tack weld the mechanism that opens the blades. It was a little loose and would leave the blades open and idle high. But after the weld never had an issue after that. I'll take $75 shipped in US. If you want pics, text me 6158791587