Hit 12s after converter and motor mounts

[KLaBZ28]

Mods in sig, bolt on only car and hit the track a couple days after finishing the Yank 3600, poly motor mounts, and ls1 driveshaft install. This was in 1597ft da, lc1 reading 13.2 afr at wot. I am pretty happy with it, haven't gone again yet I want to tune it better and put LCA relocation brackets in, and a few other things. Ran these three, and two 13.4's because I was doing bitchass burnouts. Best was the 12.924 @ 103.55. Best 60' was a 1.779! Time to get it down more in the dryer air.


http://i.imgur.com/Wj66lhVl.jpg
http://i.imgur.com/Wj66lhV.jpg


First pass:

https://www.facebook.com/video/embed?video_id=224226524399791


Awesome vid of me and my buddy Joe ripping it up! His car is a rebuild LS1 T56 car with an LS6 topend. Basically bolt on only LS6. has a 9" too:

http://www.youtube.com/watch?v=sN-joa0BJOI&feature=youtu.be

http://i.imgur.com/nNeWuL9l.jpg
http://i.imgur.com/nNeWuL9.jpg

[DMBlack]

Congrats on the 12's. Keep at it because I am sure there is more in it.

[KLaBZ28]

thanks! the air is getting cooler and dryer too so thats good. hopefully I can finish up a fea more.things ill go again.

[OVA1]

Sweet! Lots of room left… can't wait to hear how she runs once ya get her dialed in.

[KLaBZ28]

thanks, will post my new bests up here

[Still2slow]

Awesome times, I was able to squeak a 12.9x @ 104.5 out of mine back in the day when it was a bolt-on only stalled auto. I would recommend pulling the front swaybar and running skinnies on the front if your not already. That and some nice cool fall air to get one or two more mph and you should be good for a few more tenths!

[wysemunky]

12's feel good!