View Full Version : stand alone shift lights?
bricez28
09-11-2008, 06:18 PM
is there a shift light i can just buy, and i dont need a tach or anyhting to hook it up? and if so where can i get it? thanks guys
Z28pr0jekt
09-11-2008, 06:20 PM
Raptor shift light, i think summit racing has some of their own now too
bricez28
09-11-2008, 06:53 PM
how do they hook up?
Tyler Wheat
09-11-2008, 08:00 PM
These are the ones that Thunder Racing has. I use them every chance I get. Wonderful sales staff there. I've never had an issue with them, period.
http://thunderracing.com/catalog/?action=vshop&vid=4&pcid=224
Basically, you'll mount the light somewhere and you'll hook up the tach signal. You should be able to do this by tapping into the green wire on your coil connector. I reccommend using the connectors that are made for this purpose specifically. I can't remember what they're called, but you can get them at about any parts store. You can also get your tachometer reference a wire in the PCM, but I don't know which one you'd need to tap. Now that I think of it, I think there's 2 options on the PCM wires.
It should be a pretty simple install, but I can't say for sure as I have never installed one. I would think 3 wires at most. Keep in mind you'll need the proper pills for your desired setting.
bricez28
09-11-2008, 08:33 PM
ok thanks!!! i need to go get this asap lol
bad_tx_z28
09-12-2008, 01:30 AM
personaly i like the ones that have the digital rpms built in. I thinks its pretty neat.
Twisted Z
09-12-2008, 01:38 AM
I absolutly love my new AutoMeter Tube light. I did not realize it had a Tach built in! I can actually read the damn thing going down the track and hit my shift points.
I highly recomend it :D
phantomzer0
09-12-2008, 01:39 AM
I absolutly love my new AutoMeter Tube light. I did not realize it had a Tach built in! I can actually read the damn thing going down the track and hit my shift points.
I highly recomend it :D
Link?
Twisted Z
09-12-2008, 08:38 AM
here you go.
http://www.jegs.com/images/photos/1055343.gif (http://www.jegs.com/i/Auto%20Meter/105/5348/10002/-1)
Speed Inc.
09-12-2008, 09:27 AM
Raptor
I run them in my own cars and customer cars. They are small and easy to place + just a simple 3 wire hook up. ( no additional tach driver either )
power
ground
tach
+ color options
http://www.speedinc.com/cont.cfm?cid=C0000503
JoeliusZ28
09-12-2008, 01:06 PM
Not what you are looking for but I have one of these in my A-pillar and I really like it. It has a multi stage shift light that goes from orange to red, or you can just have a single shift light that is any color (this is how i have mine setup). you can also program "launch mode" into it and a few other things i never use, but I really like being able to see what my exact RPM is... the stock one is way off. It was expensive, but its probably the gauge i use the most.
http://static.summitracing.com/global/images/prod/large/atm-5788_w.jpg
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM%2D5788&N=700+115&autoview=sku
lethal93ta
09-12-2008, 01:41 PM
I bought mine years ago, but its made the same as the raptor, I put mine the the little vent in the a piller for the side window
http://www.streetlethal.net/int/DSC01872.JPG
bricez28
09-12-2008, 04:16 PM
i like yours joelius, i may have to go thaty route, what did that thing run ya? i like all your guys' lights!!!!
Ponyhntr
09-12-2008, 04:29 PM
I've got a Harlan light, but good luck finding one now.
lethal93ta
09-12-2008, 05:59 PM
I've got a Harlan light, but good luck finding one now.
thats what mine is that I posted above.
bluovlh8er
09-12-2008, 06:17 PM
autometer for me... (power shifting :metal: lol)
http://www.cardomain.com/ride/2987602/4
bluovlh8er
09-12-2008, 06:18 PM
BTW....... lethal93ta (http://ltxtech.com/forums/member.php?u=148) very nice man.
my95z28
09-13-2008, 01:53 AM
Anyone know where I can get a shiftlight that is approx the circumfrence of a pencil? I'm thinking about mounting mine in one of my vents for a cleaner look.
Formula383
09-16-2008, 01:29 AM
AutoMeter here. The digial tach is super nice. 3 wires for basic setup. It has a 4th wire to activate the shift light which attaches to a foot brake switch, line lock, etc. 7 different colors and easy to program. Also has a "Progressive" shift light mode that warns you with different colors/flashes as your shift point approaches.
http://farm4.static.flickr.com/3020/2716774821_ce9ef4f38e_b.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.