time for slicks how big can i go ??

[supr67]

I have a set of weld wheels 15 by 10 how big can I go on my 96 camaro

[tt383lt1]

it depends on the bs but im running 15x10 with 28-13.5-15 slick with no issues. most people run 28-12.5-15

[JCzNova]

it depends on the bs but im running 15x10 with 28-13.5-15 slick with no issues. most people run 28-12.5-15

:threadjacked:

Way off topic, you get your car issue with the alignment jackasses straight?
tt383lt1

[tt383lt1]

they paid some of it already but they fucked my rack and pinion up. one front rim. a intercooler coupler. and my rear slick will no keep air. i had some shit happen and now i have to watch my niece for a month strait. so i have barley any time right now. but thanks

[96LT1355Z28]

I have a set of weld wheels 15 by 10 how big can I go on my 96 camaro

I have fit a 28 X 10.0 ET Drag under mine but I had to trim some plastic off the rear bumper cover and roll the front bottom lip. I also trimmed some from the inside of the quarter pannel but rolling the lip up would do the same thing. I've had 27 X 11.0 Hoosiers also. Now I'm running a 28 X 12.5 ET Street which is a 28x10.0 tread with a 12.5" section width. I had to do some BFH mods to the inside of the wheel well at the front to keep it from rubbing. Pics are HERE (http://bdbracing.com/?page_id=6).

What size tire really depends on your ride height and what your willing to modify. A 26 X 10.5 or 11.0 is about all you can fit without making some sort of change.